VPD usage after upgrading PIX 506E

Discussion in 'Cisco' started by jaisol, May 7, 2005.

  1. jaisol

    jaisol Guest

    Before to upgrade Firewall version and PDM I was using VPN perfectly.
    Once upgraded I can connect with VPN.

    Show ver before upgrade:

    Cisco PIX Firewall Version 6.1(2)
    Cisco PIX Device Manager Version 1.1(2)
    Compiled on Fri 16-Nov-01 14:28 by morlee
    Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
    Flash E28F640J3 @ 0x300, 8MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    0: ethernet0: address is 0009.b718.b578, irq 10
    1: ethernet1: address is 0009.b718.b579, irq 11
    Licensed Features:
    Failover: Disabled
    VPN-DES: Enabled
    VPN-3DES: Disabled
    Maximum Interfaces: 2
    Cut-through Proxy: Enabled
    Guards: Enabled
    Websense: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    ISAKMP peers: Unlimited

    Show ver after upgrade:

    Cisco PIX Firewall Version 6.3(4)
    Cisco PIX Device Manager Version 3.0(2)
    Compiled on Fri 02-Jul-04 00:07 by morlee
    pixfirewall up 1 day 23 hours
    Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
    Flash E28F640J3 @ 0x300, 8MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    0: ethernet0: address is 0009.b718.b578, irq 10
    1: ethernet1: address is 0009.b718.b579, irq 11
    Licensed Features:
    Failover: Disabled
    VPN-DES: Enabled
    VPN-3DES-AES: Disabled
    Maximum Physical Interfaces: 2
    Maximum Interfaces: 2
    Cut-through Proxy: Enabled
    Guards: Enabled
    URL-filtering: Enabled
    Inside Hosts: Unlimited
    Throughput: Unlimited
    IKE peers: Unlimited

    After upgrade I don't have change configuration.

    How can I resolve it?

    THANKS!
    jaisol, May 7, 2005
    #1
    1. Advertising

  2. jaisol

    Chris Guest

    "jaisol" <> wrote in message
    news:...
    > Before to upgrade Firewall version and PDM I was using VPN perfectly.
    > Once upgraded I can connect with VPN.
    >
    > Show ver before upgrade:
    >
    > Cisco PIX Firewall Version 6.1(2)
    > Cisco PIX Device Manager Version 1.1(2)
    > Compiled on Fri 16-Nov-01 14:28 by morlee
    > Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
    > Flash E28F640J3 @ 0x300, 8MB
    > BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    > 0: ethernet0: address is 0009.b718.b578, irq 10
    > 1: ethernet1: address is 0009.b718.b579, irq 11
    > Licensed Features:
    > Failover: Disabled
    > VPN-DES: Enabled
    > VPN-3DES: Disabled
    > Maximum Interfaces: 2
    > Cut-through Proxy: Enabled
    > Guards: Enabled
    > Websense: Enabled
    > Inside Hosts: Unlimited
    > Throughput: Unlimited
    > ISAKMP peers: Unlimited
    >
    > Show ver after upgrade:
    >
    > Cisco PIX Firewall Version 6.3(4)
    > Cisco PIX Device Manager Version 3.0(2)
    > Compiled on Fri 02-Jul-04 00:07 by morlee
    > pixfirewall up 1 day 23 hours
    > Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHz
    > Flash E28F640J3 @ 0x300, 8MB
    > BIOS Flash AM29F400B @ 0xfffd8000, 32KB
    > 0: ethernet0: address is 0009.b718.b578, irq 10
    > 1: ethernet1: address is 0009.b718.b579, irq 11
    > Licensed Features:
    > Failover: Disabled
    > VPN-DES: Enabled
    > VPN-3DES-AES: Disabled
    > Maximum Physical Interfaces: 2
    > Maximum Interfaces: 2
    > Cut-through Proxy: Enabled
    > Guards: Enabled
    > URL-filtering: Enabled
    > Inside Hosts: Unlimited
    > Throughput: Unlimited
    > IKE peers: Unlimited
    >
    > After upgrade I don't have change configuration.
    >
    > How can I resolve it?
    >
    > THANKS!
    >


    Resolve what?
    Chris, May 7, 2005
    #2
    1. Advertising

  3. In article <>, Chris <chris@nospam> wrote:

    :"jaisol" <> wrote in message
    :news:...
    :> Before to upgrade Firewall version and PDM I was using VPN perfectly.
    :> Once upgraded I can connect with VPN.

    :> How can I resolve it?

    :Resolve what?

    That was pretty much what I was asking myself about the posting ;-)


    I'll take a shot in the dark:
    The OP does not have the 3DES license, so s/he must be using DES
    encryption for the VPN. Somewhere between 6.1 and 6.3, support
    was dropped for the combination of DES and SHA, so the OP may need
    to change transform sets to esp-des esp-md5-hmac
    --
    Studies show that the average reader ignores 106% of all statistics
    they see in .signatures.
    Walter Roberson, May 7, 2005
    #3
  4. jaisol

    Chris Guest


    > That was pretty much what I was asking myself about the posting ;-)
    >
    >
    > I'll take a shot in the dark:
    > The OP does not have the 3DES license, so s/he must be using DES
    > encryption for the VPN. Somewhere between 6.1 and 6.3, support
    > was dropped for the combination of DES and SHA, so the OP may need
    > to change transform sets to esp-des esp-md5-hmac
    > --
    > Studies show that the average reader ignores 106% of all statistics
    > they see in .signatures.


    "Once upgraded I can connect with VPN"

    That's good then ;-)
    Chris, May 8, 2005
    #4
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. jaisol
    Replies:
    1
    Views:
    3,724
    Walter Roberson
    May 5, 2005
  2. jaisol
    Replies:
    0
    Views:
    375
    jaisol
    May 7, 2005
  3. jaisol
    Replies:
    3
    Views:
    444
    Jyri Korhonen
    May 13, 2005
  4. Jerry Gardner

    Upgrading Memory on PIX 506E

    Jerry Gardner, Nov 19, 2005, in forum: Cisco
    Replies:
    0
    Views:
    1,714
    Jerry Gardner
    Nov 19, 2005
  5. Mike
    Replies:
    3
    Views:
    513
Loading...

Share This Page