VOIP Dial Peer has no effect

Discussion in 'VOIP' started by jego, Jun 26, 2007.

  1. jego

    jego Guest

    I have a Cisco 1760V IOS 12.4 router with the voice configuration below.
    Voice ports 2/0 and 2/1 are FXO ports connected to the PSTN.

    Currently I have no problems dialing from a VOIP Phone 9-<The phone number>
    to get an outside line on port 2/0 and 9-<The phone number> to get an
    outside line on 2/1.

    I have a VOIP PBX (Windows based) sitting next to this router and I assigned
    this router the extension number 5000. What I want to be able to do is when
    I dial 1-<Phone #>, the router will dial the extension on the PBX. On the
    PBX's configuration interface I do see that the router has registered itself
    as extension 5000, however when I dial for example 1197, where 197 is the
    extension on the PBX, I get a NOT FOUND. What am I missing here?

    Any help appreciated!

    VOICE CONFIGURATION
    ============================
    voice-port 2/0
    ring number 10
    cptone CA
    caller-id enable
    !
    voice-port 2/1
    ring number 10
    cptone CA
    caller-id enable
    !
    !
    dial-peer voice 1 pots
    destination-pattern 9.T
    port 2/0
    !
    dial-peer voice 2 pots
    destination-pattern 8.T
    port 2/1
    !
    dial-peer voice 20 voip
    service session
    destination-pattern 1.T
    session protocol sipv2
    session target ipv4:10.33.39.252
    dtmf-relay sip-notify
    codec g711alaw
    clid network-number 5000
    !
    sip-ua
    authentication username 5000 password 13151601181B0B382F
    nat symmetric check-media-src
    retry register 10
    registrar ipv4:10.33.39.252 expires 3600
    sip-server ipv4:10.33.39.252
    !
    !
    telephony-service
    max-dn 4
    max-conferences 4 gain -6
    !
    !
    ephone-dn 1
    number 5000
    !

    DEBUG (debug voip ccapi inout)
    ==================================
    *Dec 8 17:44:07.221: //278/xxxxxxxxxxxx/CCAPI/cc_api_caps_ind:
    Call Entry Is Not Found
    *Dec 8 17:44:07.221: //-1/8985F2EA8349/CCAPI/cc_api_display_ie_subfields:
    cc_api_call_setup_ind_common:
    cisco-username=206
    ----- ccCallInfo IE subfields -----
    cisco-ani=206
    cisco-anitype=0
    cisco-aniplan=0
    cisco-anipi=0
    cisco-anisi=0
    dest=1197
    cisco-desttype=0
    cisco-destplan=0
    cisco-rdie=FFFFFFFF
    cisco-rdn=
    cisco-rdntype=0
    cisco-rdnplan=0
    cisco-rdnpi=0
    cisco-rdnsi=0
    cisco-redirectreason=-1
    *Dec 8 17:44:07.225: //-1/8985F2EA8349/CCAPI/cc_api_call_setup_ind_common:
    Interface=0x840DFF88, Call Info(
    Calling Number=206(TON=Unknown, NPI=Unknown, Screening=Not Screened,
    Presenta
    tion=Allowed),
    Called Number=1197(TON=Unknown, NPI=Unknown),
    Calling Translated=FALSE, Subscriber Type Str=Unknown,
    FinalDestinationFlag=T
    RUE,
    Incoming Dial-peer=0, Progress Indication=NULL(0), Calling IE
    Present=TRUE,
    Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID
    Transparent=FALS
    E), Call Id=278
    *Dec 8 17:44:07.225: //278/8985F2EA8349/CCAPI/cc_api_call_setup_ind_common:
    Set Up Event Sent;
    Call Info(Calling Number=206(TON=Unknown, NPI=Unknown, Screening=Not
    Screened
    , Presentation=Allowed),
    Called Number=1197(TON=Unknown, NPI=Unknown))
    *Dec 8 17:44:07.233: //278/8985F2EA8349/CCAPI/cc_process_call_setup_ind:
    Event=0x84343B20
    *Dec 8 17:44:07.241: //278/8985F2EA8349/CCAPI/ccCallSetContext:
    Context=0x8368F5AC
    *Dec 8 17:44:07.241: //278/8985F2EA8349/CCAPI/cc_process_call_setup_ind:
    >>>>CCAPI handed cid 278 with tag 0 to app "_ManagedAppProcess_Default"

    *Dec 8 17:44:07.245: //278/8985F2EA8349/CCAPI/ccCallProceeding:
    Progress Indication=NULL(0)
    *Dec 8 17:44:07.253: //278/8985F2EA8349/CCAPI/ccCallDisconnect:
    Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0,
    Disconnect Ca
    use=0)
    *Dec 8 17:44:07.253: //278/8985F2EA8349/CCAPI/ccCallDisconnect:
    Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3)
    *Dec 8 17:44:07.269: //278/8985F2EA8349/CCAPI/cc_api_call_disconnect_done:
    Disposition=0, Interface=0x840DFF88, Tag=0x0, Call Id=278,
    Call Entry(Disconnect Cause=3, Voice Class Cause Code=0, Retry Count=0)
    *Dec 8 17:44:07.269: //278/8985F2EA8349/CCAPI/cc_api_call_disconnect_done:
    Call Disconnect Event Sent
     
    jego, Jun 26, 2007
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Doug A Moller

    Need help with peer to peer no hub network

    Doug A Moller, Jun 23, 2004, in forum: Wireless Networking
    Replies:
    3
    Views:
    5,803
  2. Eitan Goldin

    play media when a voip dial-peer fails

    Eitan Goldin, Jul 12, 2004, in forum: Cisco
    Replies:
    0
    Views:
    466
    Eitan Goldin
    Jul 12, 2004
  3. Eitan Goldin

    play media when a voip dial-peer fails

    Eitan Goldin, Jul 12, 2004, in forum: Cisco
    Replies:
    0
    Views:
    580
    Eitan Goldin
    Jul 12, 2004
  4. Jan

    voip dial-peer

    Jan, Nov 29, 2004, in forum: Cisco
    Replies:
    0
    Views:
    3,575
  5. GiJO

    Peer-to-Peer VOIP

    GiJO, Aug 8, 2004, in forum: VOIP
    Replies:
    6
    Views:
    1,348
    Carlos
    Aug 10, 2004
Loading...

Share This Page