Using WIC-4ESW as L3 device

Discussion in 'Cisco' started by Tom Pouce, Jun 30, 2006.

  1. Tom Pouce

    Tom Pouce Guest

    Hi all,

    Is it possible to use a WIC-4ESW as a L3 device in a IOS based router (28xx)

    I noticed the MAC addres of the Fa0/0 is the same as the VLAN interfcae
    Changing the MAC adress of the VLAN interface gives the error:
    % "mac-address" not valid on this interface
     
    Tom Pouce, Jun 30, 2006
    #1
    1. Advertising

  2. Tom Pouce

    SAto Guest

    Tom Pouce skrev:
    > Hi all,
    >
    > Is it possible to use a WIC-4ESW as a L3 device in a IOS based router (28xx)
    >
    > I noticed the MAC addres of the Fa0/0 is the same as the VLAN interfcae
    > Changing the MAC adress of the VLAN interface gives the error:
    > % "mac-address" not valid on this interface


    You cant put an IP address directly on the interface but you should be
    able to run diffirent vlans on diffirent ports and use vlan interfaces
    to route between them.

    -SAto
     
    SAto, Jun 30, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Boris
    Replies:
    8
    Views:
    7,442
    scott enwright
    Jan 11, 2004
  2. Erez Tourjeman
    Replies:
    1
    Views:
    1,228
  3. J
    Replies:
    0
    Views:
    2,439
  4. Will Plaice

    using WIC-4ESW in a 2600

    Will Plaice, Jun 15, 2004, in forum: Cisco
    Replies:
    0
    Views:
    843
    Will Plaice
    Jun 15, 2004
  5. ITCOM
    Replies:
    0
    Views:
    769
    ITCOM
    Mar 13, 2007
Loading...

Share This Page