Upgrading to 2950 switch from 2924 - process?

Discussion in 'Cisco' started by PBS, Apr 14, 2005.

  1. PBS

    PBS Guest

    Hi:
    Presently have a single 2924 Switch connected to a 1720 Router and a PIX
    515. 4- ports on the 2924 have died so we are replacing with a 2950.

    Would like this to be as quick and non-disruptive as possible. Ideally
    pre-configure the new 2950, then simply disconnect the 2924 and make the
    connections to the 2950.

    1. Is this practical?
    2. What information do I need to get from the 2924 in order to configure
    the 2950?
    3. Am I safe in assuming the 1720 and 515 won't require any changes?

    Thanks
    PS
     
    PBS, Apr 14, 2005
    #1
    1. Advertising

  2. PBS

    BradReeseCom Guest

    BradReeseCom, Apr 15, 2005
    #2
    1. Advertising

  3. PBS

    thrill5 Guest

    You should be able to use the same config on the 2950. This should get you
    at least 98% there.
    When you paste in the new config, note any lines that the 2950 doesn't
    like.

    Scott

    "PBS" <> wrote in message
    news:TOz7e.14$...
    > Hi:
    > Presently have a single 2924 Switch connected to a 1720 Router and a PIX
    > 515. 4- ports on the 2924 have died so we are replacing with a 2950.
    >
    > Would like this to be as quick and non-disruptive as possible. Ideally
    > pre-configure the new 2950, then simply disconnect the 2924 and make the
    > connections to the 2950.
    >
    > 1. Is this practical?
    > 2. What information do I need to get from the 2924 in order to configure
    > the 2950?
    > 3. Am I safe in assuming the 1720 and 515 won't require any changes?
    >
    > Thanks
    > PS
    >
     
    thrill5, Apr 15, 2005
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Replies:
    5
    Views:
    9,619
    Walter Roberson
    Jan 2, 2005
  2. Replies:
    1
    Views:
    5,458
  3. mohitbakre
    Replies:
    3
    Views:
    1,308
    www.BradReese.Com
    Dec 10, 2006
  4. Tacobell
    Replies:
    5
    Views:
    4,551
  5. STandard

    2950 switch to switch question

    STandard, Jul 18, 2007, in forum: Cisco
    Replies:
    4
    Views:
    679
    Trendkill
    Jul 19, 2007
Loading...

Share This Page