Unable to load Cisco 350AP Firmware

Discussion in 'Cisco' started by rodrick.brown@gmail.com, Jun 22, 2006.

  1. Guest

    I accidently loaded a bad firmware which corrupted my Cicco AP firmware
    which at the time was running 12.00T, once connected to the console
    port via RS232 I get the following

    l -- downLoad file into DRAM
    u -- Upload file
    p -- xfer Protocol
    n -- coNsole
    r -- Run
    s -- System info.

    I found this document which has been very helpful
    http://www.cisco.com/warp/public/102/wlan/ap-fw-upgrade.shtml

    I was finally able to upload a new firmware which is now in the DRAM

    Memory Bank:File address size encoding type
    flags
    a) DRAM :EnterpriseAP Sys 12.03 00009888 1196744 gzip Exec
    0801
    b) DRAM :EnterpriseAP Web 12.03 0012DB50 148524 .tar.gz Web
    0000
    c) DRAM :Inflate Ver. c14o 00151F7C 7556 gzip Dcdr
    0800
    d) DRAM :AWC PCMCIA FPGA 0.14 00153D00 37380 none FPGA
    0000
    e) DRAM :340 Series FWare 05.20U 0015CF04 58396 .tar.gz Data
    0000
    f) DRAM :pC4800 Firmware 05.20U 0016B320 58392 .tar.gz Data
    0000
    g) Config:AP Installation Key FE020000 64 none Key
    0000
    h) Config:VAR Installation Key FE020040 52 none Key
    0000
    i) Config:AWC_ConfigDB FE020074 528 AiroDB1 Data
    0000

    When I try to copy the firmware files needed to boot my AP on the FLASH
    mem I get the following.

    ** FLASH Write Error #5!

    As you can see there is more than enough space on the flash mem so this
    is not a space issue.

    Memory Bank total used left
    DRAM 16738168 1506992 15231176
    Config 524288 644 523644
    FLASH 7733248 0 7733248

    Anyone know a way around this? The system was working 100% until I
    goofed on trying to replace vxworks with ISO and now its a coaster.

    Any help would be appreciated thanks.
    , Jun 22, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. mike

    Cisco 350AP and 802.1x EAP

    mike, Apr 3, 2006, in forum: Cisco
    Replies:
    6
    Views:
    1,791
  2. Dean Reno
    Replies:
    0
    Views:
    844
    Dean Reno
    Jul 30, 2004
  3. Dean Reno
    Replies:
    0
    Views:
    683
    Dean Reno
    Jul 30, 2004
  4. Mark Mestman

    Change D70's Firmware to D100 Firmware???

    Mark Mestman, Aug 15, 2004, in forum: Digital Photography
    Replies:
    4
    Views:
    1,223
    Tomas Daniska
    Aug 18, 2004
  5. juanpaskater
    Replies:
    0
    Views:
    3,215
    juanpaskater
    Apr 27, 2009
Loading...

Share This Page