two T1s

Discussion in 'Cisco' started by al, Oct 23, 2003.

  1. al

    al Guest

    Hi all,
    Are there any advantage or disadvantage if the two T1s are bonded (tied
    together to look like a single 3.0Mbps line probably using IP unnumbered)
    rather than load balanced with 2 separate IP addresses?
    Thanks,
    Al
     
    al, Oct 23, 2003
    #1
    1. Advertising

  2. al

    Rob Guest

    I have found that MLPPP on a newer IOS and faster router is better
    than per-packet load balancing with CEF (2 seperate IP's as you say)



    On Thu, 23 Oct 2003 13:45:59 GMT, "al" <> wrote:

    >Hi all,
    >Are there any advantage or disadvantage if the two T1s are bonded (tied
    >together to look like a single 3.0Mbps line probably using IP unnumbered)
    >rather than load balanced with 2 separate IP addresses?
    >Thanks,
    >Al
    >
    >
     
    Rob, Oct 23, 2003
    #2
    1. Advertising

  3. al

    e-dub Guest

    Rob wrote:

    >I have found that MLPPP on a newer IOS and faster router is better
    >than per-packet load balancing with CEF (2 seperate IP's as you say)
    >
    >
    >
    >On Thu, 23 Oct 2003 13:45:59 GMT, "al" <> wrote:
    >
    >
    >
    >>Hi all,
    >>Are there any advantage or disadvantage if the two T1s are bonded (tied
    >>together to look like a single 3.0Mbps line probably using IP unnumbered)
    >>rather than load balanced with 2 separate IP addresses?
    >>Thanks,
    >>Al
    >>
    >>
    >>
    >>

    >
    >
    >

    what's the setup for something like that? could someone post some configs?
     
    e-dub, Oct 25, 2003
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Steve Pfister
    Replies:
    1
    Views:
    692
  2. Christopher J. Hinkle

    How do I upg. 2620 to handle 4 T1s

    Christopher J. Hinkle, Apr 3, 2004, in forum: Cisco
    Replies:
    7
    Views:
    628
    Vincent C Jones
    Apr 5, 2004
  3. Bob Wilson
    Replies:
    8
    Views:
    7,001
    smoove
    Aug 3, 2004
  4. Bonding two T1s

    , May 18, 2005, in forum: Cisco
    Replies:
    15
    Views:
    5,382
    zsazsa2011
    May 9, 2011
  5. Chris
    Replies:
    3
    Views:
    567
    Chris
    Jun 14, 2006
Loading...

Share This Page