Two questions

Discussion in 'Cisco' started by Tom Ottaway, Jun 9, 2004.

  1. Tom Ottaway

    Tom Ottaway Guest

    Hello all,

    I have two questions for you folks:

    1) I have four 2501's and two 1924's connected. The 2501s are connected S0
    on RouterA to S1 on RouterB, S0 on RouterB to S1 on Router C, etc. The
    1924s are connected to routers A and C. When I enable RIP on all of the
    routers, routers B, C and D are happy. The routing table on router A never
    gets populated. I can ping S1 on router B from router A, I can telnet to
    router B from A but, router A and B never seem to exchange routing
    information. Any ideas?

    2) Does anyone know of a site, or a book, that contains lots of practice
    lab scenarios? Preferably for a relatively small setup such as described
    above.

    Thanks for any thoughts,

    Tom O.
    Tom Ottaway, Jun 9, 2004
    #1
    1. Advertising

  2. In article <>,
    "Tom Ottaway" <> wrote:

    > Hello all,
    >
    > I have two questions for you folks:
    >
    > 1) I have four 2501's and two 1924's connected. The 2501s are connected S0
    > on RouterA to S1 on RouterB, S0 on RouterB to S1 on Router C, etc. The
    > 1924s are connected to routers A and C. When I enable RIP on all of the
    > routers, routers B, C and D are happy. The routing table on router A never
    > gets populated. I can ping S1 on router B from router A, I can telnet to
    > router B from A but, router A and B never seem to exchange routing
    > information. Any ideas?


    Without seeing the configs, it's hard to tell. A common problem is not
    listing all the interfaces in "network" statements in the RIP
    configurations.

    --
    Barry Margolin,
    Arlington, MA
    *** PLEASE post questions in newsgroups, not directly to me ***
    Barry Margolin, Jun 9, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Adam Embrey

    Cisco 2611 with Two T1 from two ISPs

    Adam Embrey, Jul 24, 2003, in forum: Cisco
    Replies:
    3
    Views:
    642
    Adam Embrey
    Jul 24, 2003
  2. James Parks

    Two ISP -Two Routers - 1 PIX

    James Parks, Dec 8, 2003, in forum: Cisco
    Replies:
    5
    Views:
    3,632
    James Parks
    Dec 11, 2003
  3. John
    Replies:
    4
    Views:
    657
    Barry Margolin
    Oct 16, 2004
  4. Replies:
    2
    Views:
    882
    Martin Bilgrav
    Mar 4, 2005
  5. Patrick Michael

    Re: Questions....questions....questions

    Patrick Michael, Jun 16, 2004, in forum: A+ Certification
    Replies:
    0
    Views:
    789
    Patrick Michael
    Jun 16, 2004
Loading...

Share This Page