Troubleshooting a Network problem

Discussion in 'Computer Support' started by jack_lavish, Sep 23, 2004.

  1. jack_lavish

    jack_lavish Guest

    From: (VL)
    Newsgroups: 24hoursupport.helpdesk
    Subject: Some Networking issues
    NNTP-Posting-Host: 69.151.201.127

    The problem:

    1) A small network with a mix of Win98SE, Win2000 and WinXP pcs.
    2) Cable router (192.168.100.1) with DHCP enabled. IPs assigned to PCs
    from 192.168.100.150 to 192.168.100.200
    3) One hub and and one switch hooked on to the router.
    4) The hub and switch are connected to the PCs
    5) One PC (named PC1) has static IP 192.168.100.25 assigned
    6) All other PCs are assigned IPs from the router DHCP server
    7) Cannot ping PC1 from another PC (PC2)
    8) Can ping PC1 from all other PCs
    9) Can ping PC2 from all other PCs
    10) Can ping all PCs from PC2
    11) PC1 is actually a printer with a static ip.

    Same subnet masks on all the pcs 255.255.255.0 .Same default gateway
    0.0.0.0

    Help in identifying this problem. Can a bad NIC card cause this?
     
    jack_lavish, Sep 23, 2004
    #1
    1. Advertising

  2. jack_lavish

    Duane Arnold Guest

    (jack_lavish) wrote in
    news::

    > From: (VL)
    > Newsgroups: 24hoursupport.helpdesk
    > Subject: Some Networking issues
    > NNTP-Posting-Host: 69.151.201.127
    >
    > The problem:
    >
    > 1) A small network with a mix of Win98SE, Win2000 and WinXP pcs.
    > 2) Cable router (192.168.100.1) with DHCP enabled. IPs assigned to PCs
    > from 192.168.100.150 to 192.168.100.200
    > 3) One hub and and one switch hooked on to the router.
    > 4) The hub and switch are connected to the PCs
    > 5) One PC (named PC1) has static IP 192.168.100.25 assigned
    > 6) All other PCs are assigned IPs from the router DHCP server
    > 7) Cannot ping PC1 from another PC (PC2)
    > 8) Can ping PC1 from all other PCs
    > 9) Can ping PC2 from all other PCs
    > 10) Can ping all PCs from PC2
    > 11) PC1 is actually a printer with a static ip.
    >
    > Same subnet masks on all the pcs 255.255.255.0 .Same default gateway
    > 0.0.0.0


    What router is this? And how can the default gateway be 0.0.0.0? The
    default gateway IP should be the router's device IP on all the NIC's I
    would think. At least that's the way it was on the Linksys router and the
    WtachGuard that I use now.

    192.168.111.2 through 192.168.111.6 DHCP IP(s) and the printer server has
    static of 192.168.111.20.

    Subnet mask is 255.255.255.0

    Default gateway is 192.168.111.1 the WG device IP.

    What IP are you getting at any pc when you enter IPconfig /all at the DOS
    Command Prompt?

    Duane :)
     
    Duane Arnold, Sep 24, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. jonjo

    Re: Home network troubleshooting

    jonjo, Jul 6, 2004, in forum: Wireless Networking
    Replies:
    0
    Views:
    1,120
    jonjo
    Jul 6, 2004
  2. brickwalls19
    Replies:
    2
    Views:
    985
    brickwalls19
    Oct 5, 2006
  3. Bruce

    Network Troubleshooting

    Bruce, Oct 30, 2006, in forum: Cisco
    Replies:
    2
    Views:
    371
  4. Bruce

    Network Troubleshooting

    Bruce, Oct 30, 2006, in forum: Cisco
    Replies:
    2
    Views:
    368
    Bruce
    Oct 30, 2006
  5. Pleb Plebian

    Help: network troubleshooting?

    Pleb Plebian, Oct 21, 2004, in forum: NZ Computing
    Replies:
    0
    Views:
    344
    Pleb Plebian
    Oct 21, 2004
Loading...

Share This Page