TFTP problem - memory ?

Discussion in 'Cisco' started by boxers999, Apr 6, 2007.

  1. boxers999

    boxers999 Guest

    Hi Folks,

    Can anyone tell me what too do next ?

    access-server(boot)#copy tftp flash

    System flash directory:
    No files in System flash
    [0 bytes used, 8388608 available, 8388608 total]
    Address or name of remote host [255.255.255.255]? 192.168.1.110
    Source file name? ios_backup
    Destination file name [ios_backup]?
    Accessing file 'ios_backup' on 192.168.1.110...
    Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    Device needs erasure before copying new file
    Erase flash device before writing? [confirm]

    Copy 'ios_backup' from server
    as 'ios_backup' into Flash WITH erase? [yes/no]y
    Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    Loading ios_backup from 192.168.1.110 (via
    Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    address: 0xE07268 at 0x1098BEE (PC)

    Thanks !
    boxers999, Apr 6, 2007
    #1
    1. Advertising

  2. boxers999

    Thrill5 Guest

    Your flash memory is bad, and you need to replace it. If you have a Cisco
    support contract, open a TAC case and they will replace the router. If you
    don't have one, you will need to order the correct flash memory for the
    device you have. If you can afford to have this router down for several
    days, you can take your chances on ordering the cheapest memory you can
    find, otherwise order only Kingston, PNY, or some other name brand memory
    that is packaged specifically for your router type. My luck with the off
    brands working the first time is about 50/50.

    As an FYI you should not rename IOS images, as this is not best practice.
    What version, and what platform is "ios_backup" for?

    Scott
    "boxers999" <> wrote in message
    news:...
    > Hi Folks,
    >
    > Can anyone tell me what too do next ?
    >
    > access-server(boot)#copy tftp flash
    >
    > System flash directory:
    > No files in System flash
    > [0 bytes used, 8388608 available, 8388608 total]
    > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > Source file name? ios_backup
    > Destination file name [ios_backup]?
    > Accessing file 'ios_backup' on 192.168.1.110...
    > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]
    >
    > Device needs erasure before copying new file
    > Erase flash device before writing? [confirm]
    >
    > Copy 'ios_backup' from server
    > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > Loading ios_backup from 192.168.1.110 (via
    > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > address: 0xE07268 at 0x1098BEE (PC)
    >
    > Thanks !
    >
    Thrill5, Apr 6, 2007
    #2
    1. Advertising

  3. boxers999

    boxers999 Guest

    Thanks for your help !

    Its running in cut down ios at the moment. As a last ditch, is there a
    way of formatting the flash ?

    Cheers

    On 6 Apr, 18:07, "Thrill5" <> wrote:
    > Your flash memory is bad, and you need to replace it. If you have a Cisco
    > support contract, open a TAC case and they will replace the router. If you
    > don't have one, you will need to order the correct flash memory for the
    > device you have. If you can afford to have this router down for several
    > days, you can take your chances on ordering the cheapest memory you can
    > find, otherwise order only Kingston, PNY, or some other name brand memory
    > that is packaged specifically for your router type. My luck with the off
    > brands working the first time is about 50/50.
    >
    > As an FYI you should not rename IOS images, as this is not best practice.
    > What version, and what platform is "ios_backup" for?
    >
    > Scott"boxers999" <> wrote in message
    >
    > news:...
    >
    > > Hi Folks,

    >
    > > Can anyone tell me what too do next ?

    >
    > > access-server(boot)#copy tftp flash

    >
    > > System flash directory:
    > > No files in System flash
    > > [0 bytes used, 8388608 available, 8388608 total]
    > > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > > Source file name? ios_backup
    > > Destination file name [ios_backup]?
    > > Accessing file 'ios_backup' on 192.168.1.110...
    > > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    >
    > > Device needs erasure before copying new file
    > > Erase flash device before writing? [confirm]

    >
    > > Copy 'ios_backup' from server
    > > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > > Loading ios_backup from 192.168.1.110 (via
    > > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > > address: 0xE07268 at 0x1098BEE (PC)

    >
    > > Thanks !
    boxers999, Apr 8, 2007
    #3
  4. boxers999

    Guest

    On 8 Apr, 16:10, "boxers999" <> wrote:
    > Thanks for your help !
    >
    > Its running in cut down ios at the moment. As a last ditch, is there a
    > way of formatting the flash ?
    >
    > Cheers
    >
    > On 6 Apr, 18:07, "Thrill5" <> wrote:
    >
    >
    >
    > > Your flash memory is bad, and you need to replace it. If you have a Cisco
    > > support contract, open a TAC case and they will replace the router. If you
    > > don't have one, you will need to order the correct flash memory for the
    > > device you have. If you can afford to have this router down for several
    > > days, you can take your chances on ordering the cheapest memory you can
    > > find, otherwise order only Kingston, PNY, or some other name brand memory
    > > that is packaged specifically for your router type. My luck with the off
    > > brands working the first time is about 50/50.

    >
    > > As an FYI you should not rename IOS images, as this is not best practice.
    > > What version, and what platform is "ios_backup" for?

    >
    > > Scott"boxers999" <> wrote in message

    >
    > >news:...

    >
    > > > Hi Folks,

    >
    > > > Can anyone tell me what too do next ?

    >
    > > > access-server(boot)#copy tftp flash

    >
    > > > System flash directory:
    > > > No files in System flash
    > > > [0 bytes used, 8388608 available, 8388608 total]
    > > > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > > > Source file name? ios_backup
    > > > Destination file name [ios_backup]?
    > > > Accessing file 'ios_backup' on 192.168.1.110...
    > > > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    >
    > > > Device needs erasure before copying new file
    > > > Erase flash device before writing? [confirm]

    >
    > > > Copy 'ios_backup' from server
    > > > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > > > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > > > Loading ios_backup from 192.168.1.110 (via
    > > > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > > > address: 0xE07268 at 0x1098BEE (PC)

    >
    > > > Thanks !- Hide quoted text -

    >
    > - Show quoted text -


    format flash:
    , Apr 8, 2007
    #4
  5. boxers999

    boxers999 Guest

    Thanks for the help, but :-

    access-server(boot)>format flash:
    ^
    % Invalid input detected at '^' marker.

    access-server(boot)>en
    Password:
    access-server(boot)#format flash:
    ^
    % Invalid input detected at '^' marker.

    access-server(boot)#



    On 8 Apr, 16:20, wrote:
    > On 8 Apr, 16:10, "boxers999" <> wrote:
    >
    >
    >
    > > Thanks for your help !

    >
    > > Its running in cut down ios at the moment. As a last ditch, is there a
    > > way of formatting the flash ?

    >
    > > Cheers

    >
    > > On 6 Apr, 18:07, "Thrill5" <> wrote:

    >
    > > > Your flash memory is bad, and you need to replace it. If you have a Cisco
    > > > support contract, open a TAC case and they will replace the router. If you
    > > > don't have one, you will need to order the correct flash memory for the
    > > > device you have. If you can afford to have this router down for several
    > > > days, you can take your chances on ordering the cheapest memory you can
    > > > find, otherwise order only Kingston, PNY, or some other name brand memory
    > > > that is packaged specifically for your router type. My luck with the off
    > > > brands working the first time is about 50/50.

    >
    > > > As an FYI you should not rename IOS images, as this is not best practice.
    > > > What version, and what platform is "ios_backup" for?

    >
    > > > Scott"boxers999" <> wrote in message

    >
    > > >news:...

    >
    > > > > Hi Folks,

    >
    > > > > Can anyone tell me what too do next ?

    >
    > > > > access-server(boot)#copy tftp flash

    >
    > > > > System flash directory:
    > > > > No files in System flash
    > > > > [0 bytes used, 8388608 available, 8388608 total]
    > > > > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > > > > Source file name? ios_backup
    > > > > Destination file name [ios_backup]?
    > > > > Accessing file 'ios_backup' on 192.168.1.110...
    > > > > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    >
    > > > > Device needs erasure before copying new file
    > > > > Erase flash device before writing? [confirm]

    >
    > > > > Copy 'ios_backup' from server
    > > > > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > > > > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > > > > Loading ios_backup from 192.168.1.110 (via
    > > > > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > > > > address: 0xE07268 at 0x1098BEE (PC)

    >
    > > > > Thanks !- Hide quoted text -

    >
    > > - Show quoted text -

    >
    > format flash:
    boxers999, Apr 8, 2007
    #5
  6. On Apr 8, 7:29 pm, "boxers999" <> wrote:
    > Thanks for the help, but :-
    >
    > access-server(boot)>format flash:
    > ^
    > % Invalid input detected at '^' marker.
    >
    > access-server(boot)>en
    > Password:
    > access-server(boot)#format flash:
    > ^
    > % Invalid input detected at '^' marker.
    >
    > access-server(boot)#
    >
    > On 8 Apr, 16:20, wrote:
    >
    > > On 8 Apr, 16:10, "boxers999" <> wrote:

    >
    > > > Thanks for your help !

    >
    > > > Its running in cut down ios at the moment. As a last ditch, is there a
    > > > way of formatting the flash ?

    >
    > > > Cheers

    >
    > > > On 6 Apr, 18:07, "Thrill5" <> wrote:

    >
    > > > > Your flash memory is bad, and you need to replace it. If you have a Cisco
    > > > > support contract, open a TAC case and they will replace the router. If you
    > > > > don't have one, you will need to order the correct flash memory for the
    > > > > device you have. If you can afford to have this router down for several
    > > > > days, you can take your chances on ordering the cheapest memory you can
    > > > > find, otherwise order only Kingston, PNY, or some other name brand memory
    > > > > that is packaged specifically for your router type. My luck with the off
    > > > > brands working the first time is about 50/50.

    >
    > > > > As an FYI you should not rename IOS images, as this is not best practice.
    > > > > What version, and what platform is "ios_backup" for?

    >
    > > > > Scott"boxers999" <> wrote in message

    >
    > > > >news:...

    >
    > > > > > Hi Folks,

    >
    > > > > > Can anyone tell me what too do next ?

    >
    > > > > > access-server(boot)#copy tftp flash

    >
    > > > > > System flash directory:
    > > > > > No files in System flash
    > > > > > [0 bytes used, 8388608 available, 8388608 total]
    > > > > > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > > > > > Source file name? ios_backup
    > > > > > Destination file name [ios_backup]?
    > > > > > Accessing file 'ios_backup' on 192.168.1.110...
    > > > > > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    >
    > > > > > Device needs erasure before copying new file
    > > > > > Erase flash device before writing? [confirm]

    >
    > > > > > Copy 'ios_backup' from server
    > > > > > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > > > > > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > > > > > Loading ios_backup from 192.168.1.110 (via
    > > > > > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > > > > > address: 0xE07268 at 0x1098BEE (PC)

    >
    > > > > > Thanks !- Hide quoted text -

    >
    > > > - Show quoted text -

    >
    > > format flash:


    The 'format flash' command is used for equipments with PCMCIA flash.
    For the inernal flash, use:
    erase flash:

    Mohammed
    www.RouterGeek.net
    Mohammed Alani, Apr 9, 2007
    #6
  7. boxers999

    Guest

    On 9 Apr, 17:17, "Mohammed Alani" <> wrote:
    > On Apr 8, 7:29 pm, "boxers999" <> wrote:
    >
    >
    >
    >
    >
    > > Thanks for the help, but :-

    >
    > > access-server(boot)>format flash:
    > > ^
    > > % Invalid input detected at '^' marker.

    >
    > > access-server(boot)>en
    > > Password:
    > > access-server(boot)#format flash:
    > > ^
    > > % Invalid input detected at '^' marker.

    >
    > > access-server(boot)#

    >
    > > On 8 Apr, 16:20, wrote:

    >
    > > > On 8 Apr, 16:10, "boxers999" <> wrote:

    >
    > > > > Thanks for your help !

    >
    > > > > Its running in cut down ios at the moment. As a last ditch, is there a
    > > > > way of formatting the flash ?

    >
    > > > > Cheers

    >
    > > > > On 6 Apr, 18:07, "Thrill5" <> wrote:

    >
    > > > > > Your flash memory is bad, and you need to replace it. If you have a Cisco
    > > > > > support contract, open a TAC case and they will replace the router. If you
    > > > > > don't have one, you will need to order the correct flash memory for the
    > > > > > device you have. If you can afford to have this router down for several
    > > > > > days, you can take your chances on ordering the cheapest memory you can
    > > > > > find, otherwise order only Kingston, PNY, or some other name brand memory
    > > > > > that is packaged specifically for your router type. My luck with the off
    > > > > > brands working the first time is about 50/50.

    >
    > > > > > As an FYI you should not rename IOS images, as this is not best practice.
    > > > > > What version, and what platform is "ios_backup" for?

    >
    > > > > > Scott"boxers999" <> wrote in message

    >
    > > > > >news:...

    >
    > > > > > > Hi Folks,

    >
    > > > > > > Can anyone tell me what too do next ?

    >
    > > > > > > access-server(boot)#copy tftp flash

    >
    > > > > > > System flash directory:
    > > > > > > No files in System flash
    > > > > > > [0 bytes used, 8388608 available, 8388608 total]
    > > > > > > Address or name of remote host [255.255.255.255]? 192.168.1.110
    > > > > > > Source file name? ios_backup
    > > > > > > Destination file name [ios_backup]?
    > > > > > > Accessing file 'ios_backup' on 192.168.1.110...
    > > > > > > Loading ios_backup from 192.168.1.110 (via Ethernet0): ! [OK]

    >
    > > > > > > Device needs erasure before copying new file
    > > > > > > Erase flash device before writing? [confirm]

    >
    > > > > > > Copy 'ios_backup' from server
    > > > > > > as 'ios_backup' into Flash WITH erase? [yes/no]y
    > > > > > > Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
    > > > > > > Loading ios_backup from 192.168.1.110 (via
    > > > > > > Ethernet0): !!!!!!!!!!!!!!!!!Parity (control reg=0x8218) Error,
    > > > > > > address: 0xE07268 at 0x1098BEE (PC)

    >
    > > > > > > Thanks !- Hide quoted text -

    >
    > > > > - Show quoted text -

    >
    > > > format flash:

    >
    > The 'format flash' command is used for equipments with PCMCIA flash.
    > For the inernal flash, use:
    > erase flash:
    >
    > Mohammedwww.RouterGeek.net- Hide quoted text -
    >


    Strange, I think I remember formatting
    the flash on 2500, 4000 (router).

    An 837 that I have here seems to be offering
    the command.

    hr#format flash: ?
    <cr>

    Maybe of course erase flash and format flash are
    exactly equivalent, I don't know.

    Note that it is not a "config mode" command.
    , Apr 9, 2007
    #7
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Andree Toonk

    tftp boot problem + Cisco 805

    Andree Toonk, Dec 30, 2003, in forum: Cisco
    Replies:
    6
    Views:
    5,539
    zaphod1979
    May 21, 2009
  2. tige
    Replies:
    1
    Views:
    7,114
    Johnson_dk
    Jun 30, 2004
  3. Catalyst_user

    TFTP from a Cisco Catalyst 4006 problem

    Catalyst_user, Mar 17, 2005, in forum: Cisco
    Replies:
    5
    Views:
    748
    Hansang Bae
    Mar 22, 2005
  4. zxcvar
    Replies:
    3
    Views:
    829
    Joe Hotchkiss
    Nov 28, 2004
  5. Sharad
    Replies:
    0
    Views:
    612
    Sharad
    Feb 13, 2007
Loading...

Share This Page