Tcl Script DNIS

Discussion in 'Cisco' started by Witek, Mar 7, 2011.

  1. Witek

    Witek

    Joined:
    Mar 7, 2011
    Messages:
    1
    I've got an problem with TCL script, with one part that reads outgoing number, if called party number is sent in one part I've been using

    infotag get leg_dnis

    And it returned me this number, when Called Party Number is sent in parts I can't read it, could you help me?


    Code:
    *Mar  7 16:39:12.012: ISDN Se0/3/0:15 Q931: RX <- INFORMATION pd = 8  callref = 0x010F
            Called Party Number i = 0x81, '1'
                    Plan:ISDN, Type:Unknown
    *Mar  7 16:39:12.192: ISDN Se0/3/0:15 Q931: RX <- INFORMATION pd = 8  callref = 0x010F
            Called Party Number i = 0x81, '0'
                    Plan:ISDN, Type:Unknown
    *Mar  7 16:39:12.332: ISDN Se0/3/0:15 Q931: RX <- INFORMATION pd = 8  callref = 0x010F
            Called Party Number i = 0x81, '1'
                    Plan:ISDN, Type:Unknown
    *Mar  7 16:39:12.504: ISDN Se0/3/0:15 Q931: RX <- INFORMATION pd = 8  callref = 0x010F
            Called Party Number i = 0x81, '0'
    This is example with called party number in parts
     
    Witek, Mar 7, 2011
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Primoz Jeroncic

    IVR Tcl script and multilanguage support

    Primoz Jeroncic, Oct 22, 2003, in forum: Cisco
    Replies:
    1
    Views:
    1,702
    Andrew Zhilenko
    Oct 25, 2003
  2. Jimmyzshack

    dnis router config help

    Jimmyzshack, Nov 26, 2003, in forum: Cisco
    Replies:
    1
    Views:
    491
    CCIE8122
    Nov 27, 2003
  3. Matt
    Replies:
    0
    Views:
    473
  4. Matt
    Replies:
    1
    Views:
    551
    Aaron Leonard
    Oct 19, 2004
  5. calin_cri

    TCL script for changing interfaces

    calin_cri, Apr 16, 2010, in forum: Cisco
    Replies:
    2
    Views:
    572
    blanken79
    Apr 17, 2010
Loading...

Share This Page