strange cisco 7604 password recovery problem

Discussion in 'Cisco' started by Marko Uusitalo, Apr 3, 2009.

  1. Hi!
    We have in our lab a cisco 7604 and I can´t remember it´s enable password.

    I tried standard password recovery procedure (reboot, confreg 0x2142
    reset) but for some reason this box allways loads configuration (it
    canges configuration register to 0x2102 automagically)

    Any help is greatly appreciatted

    Here is copy.paste from my termina session:
    R7604_1>
    System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2004 by cisco Systems, Inc.
    Cat6k-Sup32 platform with 524288 Kbytes of main memory

    Autoboot executing command: "boot "


    monitor: command "boot" aborted due to user interrupt


    rommon 1 > confreg 0x2142


    rommon 2 > reset

    Resetting .......



    System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2004 by cisco Systems, Inc.
    Cat6k-Sup32 platform with 524288 Kbytes of main memory

    Autoboot executing command: "boot "

    Initializing ATA monitor library...
    string is bootdisk:s3223-adventerprisek9_wan-mz.122-33.SRA3.bin

    Initializing ATA monitor library...

    Self extracting the image... [OK]
    Self decompressing the image :
    ########################################################
    ########################################################### [OK]

    Restricted Rights Legend

    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.

    cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706



    Cisco IOS Software, s3223_sp Software (s3223_sp-ADVENTERPRISEK9_WAN-M),
    Version 12.2(33
    )SRA3, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Wed 28-Feb-07 11:56 by prod_rel_team
    Image text-base: 0x4023131C, data-base: 0x41714000

    MAC based EOBC installed

    00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console
    debugging output.

    00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

    00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console
    debugging output.

    00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
    ensure console debug
    ging output.

    00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



    System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 2004 by cisco Systems, Inc.
    Cat6k-MSFC2A platform with 524288 Kbytes of main memory

    Download Start
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Download Completed! Booting the image.
    Self decompressing the image :
    ########################################################
    #######################################################################################
    #######################################################################################
    ################# [OK]

    Restricted Rights Legend

    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.

    cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706



    Cisco IOS Software, s3223_rp Software (s3223_rp-ADVENTERPRISEK9_WAN-M),
    Version 12.2(33
    )SRA3, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Wed 28-Feb-07 11:35 by prod_rel_team
    Image text-base: 0x401012FC, data-base: 0x433A0000


    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be
    found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email to
    .

    cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K
    bytes of memory.
    Processor board ID FOX103105HB
    R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
    Last reset from power-on
    1 Virtual Ethernet interface
    9 Gigabit Ethernet interfaces
    1915K bytes of non-volatile configuration memory.

    65536K bytes of Flash internal SIMM (Sector size 512K).
    ICMP redirect is disabled on interfaces with secondary IP address


    Press RETURN to get started!


    00:01:10: RP: Currently running ROMMON from S (Gold) region
    *Apr 3 10:33:54.287: %SYS-6-CLOCKUPDATE: System clock has been updated
    from 08:33:54 U
    TC Fri Apr 3 2009 to 10:33:54 EET Fri Apr 3 2009, configured from
    console by console.
    *Apr 3 11:33:54.291: %SYS-6-CLOCKUPDATE: System clock has been updated
    from 10:33:54 E
    ET Fri Apr 3 2009 to 11:33:54 EET Fri Apr 3 2009, configured from
    console by console.
    *Apr 3 11:33:54.383: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled
    for type vlan
    *Apr 3 11:33:55.680: %SYS-5-CONFIG_I: Configured from memory by console
    *Apr 3 11:33:57.200: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, s3223_rp Software (s3223_rp-ADVENTERPRISEK9_WAN-M),
    Version 12.2(33
    )SRA3, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Wed 28-Feb-07 11:35 by prod_rel_team
    *Apr 3 11:33:57.212: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Apr 3 11:33:57.212: %NTP-6-RESTART: NTP process starts
    *Apr 3 11:33:57.820: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE:
    Replication Mode Change
    Detected. Current system replication mode is Ingress
    00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

    00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
    ensure console debug
    ging output.

    00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



    *Apr 3 11:33:59.568: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode
    Changed to Egres
    s mode (Oir event)
    00:00:07: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
    ensure console de
    bugging output.


    Firmware compiled 07-Jul-06 18:10 by integ Build [100]


    00:01:19: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type
    vlan
    00:01:28: %SYS-SP-5-RESTART: System restarted --
    Cisco IOS Software, s3223_sp Software (s3223_sp-ADVENTERPRISEK9_WAN-M),
    Version 12.2(33
    )SRA3, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Wed 28-Feb-07 11:56 by prod_rel_team
    00:01:28: SP: Currently running ROMMON from S (Gold) region
    *Apr 3 11:33:59.600: %OIR-SP-6-INSPS: Power supply inserted in slot 1
    *Apr 3 11:33:59.616: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
    *Apr 3 11:34:06.276: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal
    Diagnostics...
    Tata reititinta ei konfiguroida laboratoriotoissa!!!!

    HAND OFF!!!!!!!

    No configuration changes in this router!!!!

    T. Marko Uusitalo, puh 050-3525975


    R7604_1>
    *Apr 3 11:34:19.100: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode
    Changed to Ingre
    ss mode (Oir event)
    *Apr 3 11:34:18.444: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online
    Diagnostics
    R7604_1>
    *Apr 3 11:34:19.596: %OIR-SP-6-INSCARD: Card inserted in slot 1,
    interfaces are now on
    line
    R7604_1>
    *Apr 3 11:36:21.213: %NTP-4-PEERUNREACH: Peer 192.168.1.254 is unreachable
    R7604_1>
    *Apr 3 11:36:28.213: %NTP-4-PEERUNREACH: Peer 193.167.196.1 is unreachable
    *Apr 3 11:36:28.213: %NTP-4-PEERUNREACH: Peer 10.20.76.10 is unreachable
    R7604_1>
    *Apr 3 11:36:30.213: %NTP-4-PEERUNREACH: Peer 192.168.1.17 is unreachable
    *Apr 3 11:36:31.213: %NTP-4-PEERUNREACH: Peer 194.137.39.68 is unreachable
    R7604_1>
    *Apr 3 11:36:35.214: %NTP-4-PEERUNREACH: Peer 194.137.39.67 is unreachable
    *Apr 3 11:36:35.214: %NTP-4-PEERUNREACH: Peer 192.168.2.253 is unreachable
    R7604_1>
    Marko Uusitalo, Apr 3, 2009
    #1
    1. Advertising

  2. Marko Uusitalo

    Thrill5 Guest

    Instead of doing a "reset" after changing the configuration register, try
    doing a "boot". I think the problem is that you are changing the
    configuration register and it's not saved, so when you do a reset it gets
    changed back to the original value.

    "Marko Uusitalo" <muusitalo@.gmail.com> wrote in message
    news:iSuBl.234$...
    > Hi!
    > We have in our lab a cisco 7604 and I can´t remember it´s enable password.
    >
    > I tried standard password recovery procedure (reboot, confreg 0x2142
    > reset) but for some reason this box allways loads configuration (it canges
    > configuration register to 0x2102 automagically)
    >
    > Any help is greatly appreciatted
    >
    > Here is copy.paste from my termina session:
    > R7604_1>
    > System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 2004 by cisco Systems, Inc.
    > Cat6k-Sup32 platform with 524288 Kbytes of main memory
    >
    > Autoboot executing command: "boot "
    >
    >
    > monitor: command "boot" aborted due to user interrupt
    >
    >
    > rommon 1 > confreg 0x2142
    >
    >
    > rommon 2 > reset
    >
    > Resetting .......
    >
    >
    >
    > System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 2004 by cisco Systems, Inc.
    > Cat6k-Sup32 platform with 524288 Kbytes of main memory
    >
    > Autoboot executing command: "boot "
    >
    > Initializing ATA monitor library...
    > string is bootdisk:s3223-adventerprisek9_wan-mz.122-33.SRA3.bin
    >
    > Initializing ATA monitor library...
    >
    > Self extracting the image... [OK]
    > Self decompressing the image :
    > ########################################################
    > ########################################################### [OK]
    >
    > Restricted Rights Legend
    >
    > Use, duplication, or disclosure by the Government is
    > subject to restrictions as set forth in subparagraph
    > (c) of the Commercial Computer Software - Restricted
    > Rights clause at FAR sec. 52.227-19 and subparagraph
    > (c) (1) (ii) of the Rights in Technical Data and Computer
    > Software clause at DFARS sec. 252.227-7013.
    >
    > cisco Systems, Inc.
    > 170 West Tasman Drive
    > San Jose, California 95134-1706
    >
    >
    >
    > Cisco IOS Software, s3223_sp Software (s3223_sp-ADVENTERPRISEK9_WAN-M),
    > Version 12.2(33
    > )SRA3, RELEASE SOFTWARE (fc2)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 1986-2007 by Cisco Systems, Inc.
    > Compiled Wed 28-Feb-07 11:56 by prod_rel_team
    > Image text-base: 0x4023131C, data-base: 0x41714000
    >
    > MAC based EOBC installed
    >
    > 00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console
    > debugging output.
    >
    > 00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
    >
    > 00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console
    > debugging output.
    >
    > 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure
    > console debug
    > ging output.
    >
    > 00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
    >
    >
    >
    > System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 2004 by cisco Systems, Inc.
    > Cat6k-MSFC2A platform with 524288 Kbytes of main memory
    >
    > Download Start
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    > Download Completed! Booting the image.
    > Self decompressing the image :
    > ########################################################
    > #######################################################################################
    > #######################################################################################
    > ################# [OK]
    >
    > Restricted Rights Legend
    >
    > Use, duplication, or disclosure by the Government is
    > subject to restrictions as set forth in subparagraph
    > (c) of the Commercial Computer Software - Restricted
    > Rights clause at FAR sec. 52.227-19 and subparagraph
    > (c) (1) (ii) of the Rights in Technical Data and Computer
    > Software clause at DFARS sec. 252.227-7013.
    >
    > cisco Systems, Inc.
    > 170 West Tasman Drive
    > San Jose, California 95134-1706
    >
    >
    >
    > Cisco IOS Software, s3223_rp Software (s3223_rp-ADVENTERPRISEK9_WAN-M),
    > Version 12.2(33
    > )SRA3, RELEASE SOFTWARE (fc2)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 1986-2007 by Cisco Systems, Inc.
    > Compiled Wed 28-Feb-07 11:35 by prod_rel_team
    > Image text-base: 0x401012FC, data-base: 0x433A0000
    >
    >
    > This product contains cryptographic features and is subject to United
    > States and local country laws governing import, export, transfer and
    > use. Delivery of Cisco cryptographic products does not imply
    > third-party authority to import, export, distribute or use encryption.
    > Importers, exporters, distributors and users are responsible for
    > compliance with U.S. and local country laws. By using this product you
    > agree to comply with applicable laws and regulations. If you are unable
    > to comply with U.S. and local laws, return this product immediately.
    >
    > A summary of U.S. laws governing Cisco cryptographic products may be found
    > at:
    > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    >
    > If you require further assistance please contact us by sending email to
    > .
    >
    > cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K bytes
    > of memory.
    > Processor board ID FOX103105HB
    > R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3
    > Cache
    > Last reset from power-on
    > 1 Virtual Ethernet interface
    > 9 Gigabit Ethernet interfaces
    > 1915K bytes of non-volatile configuration memory.
    >
    > 65536K bytes of Flash internal SIMM (Sector size 512K).
    > ICMP redirect is disabled on interfaces with secondary IP address
    >
    >
    > Press RETURN to get started!
    >
    >
    > 00:01:10: RP: Currently running ROMMON from S (Gold) region
    > *Apr 3 10:33:54.287: %SYS-6-CLOCKUPDATE: System clock has been updated
    > from 08:33:54 U
    > TC Fri Apr 3 2009 to 10:33:54 EET Fri Apr 3 2009, configured from console
    > by console.
    > *Apr 3 11:33:54.291: %SYS-6-CLOCKUPDATE: System clock has been updated
    > from 10:33:54 E
    > ET Fri Apr 3 2009 to 11:33:54 EET Fri Apr 3 2009, configured from console
    > by console.
    > *Apr 3 11:33:54.383: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled
    > for type vlan
    > *Apr 3 11:33:55.680: %SYS-5-CONFIG_I: Configured from memory by console
    > *Apr 3 11:33:57.200: %SYS-5-RESTART: System restarted --
    > Cisco IOS Software, s3223_rp Software (s3223_rp-ADVENTERPRISEK9_WAN-M),
    > Version 12.2(33
    > )SRA3, RELEASE SOFTWARE (fc2)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 1986-2007 by Cisco Systems, Inc.
    > Compiled Wed 28-Feb-07 11:35 by prod_rel_team
    > *Apr 3 11:33:57.212: %SSH-5-ENABLED: SSH 1.99 has been enabled
    > *Apr 3 11:33:57.212: %NTP-6-RESTART: NTP process starts
    > *Apr 3 11:33:57.820: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE:
    > Replication Mode Change
    > Detected. Current system replication mode is Ingress
    > 00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
    >
    > 00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure
    > console debug
    > ging output.
    >
    > 00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
    >
    >
    >
    > *Apr 3 11:33:59.568: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode
    > Changed to Egres
    > s mode (Oir event)
    > 00:00:07: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
    > ensure console de
    > bugging output.
    >
    >
    > Firmware compiled 07-Jul-06 18:10 by integ Build [100]
    >
    >
    > 00:01:19: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type
    > vlan
    > 00:01:28: %SYS-SP-5-RESTART: System restarted --
    > Cisco IOS Software, s3223_sp Software (s3223_sp-ADVENTERPRISEK9_WAN-M),
    > Version 12.2(33
    > )SRA3, RELEASE SOFTWARE (fc2)
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 1986-2007 by Cisco Systems, Inc.
    > Compiled Wed 28-Feb-07 11:56 by prod_rel_team
    > 00:01:28: SP: Currently running ROMMON from S (Gold) region
    > *Apr 3 11:33:59.600: %OIR-SP-6-INSPS: Power supply inserted in slot 1
    > *Apr 3 11:33:59.616: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
    > *Apr 3 11:34:06.276: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal
    > Diagnostics...
    > Tata reititinta ei konfiguroida laboratoriotoissa!!!!
    >
    > HAND OFF!!!!!!!
    >
    > No configuration changes in this router!!!!
    >
    > T. Marko Uusitalo, puh 050-3525975
    >
    >
    > R7604_1>
    > *Apr 3 11:34:19.100: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode
    > Changed to Ingre
    > ss mode (Oir event)
    > *Apr 3 11:34:18.444: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online
    > Diagnostics
    > R7604_1>
    > *Apr 3 11:34:19.596: %OIR-SP-6-INSCARD: Card inserted in slot 1,
    > interfaces are now on
    > line
    > R7604_1>
    > *Apr 3 11:36:21.213: %NTP-4-PEERUNREACH: Peer 192.168.1.254 is
    > unreachable
    > R7604_1>
    > *Apr 3 11:36:28.213: %NTP-4-PEERUNREACH: Peer 193.167.196.1 is
    > unreachable
    > *Apr 3 11:36:28.213: %NTP-4-PEERUNREACH: Peer 10.20.76.10 is unreachable
    > R7604_1>
    > *Apr 3 11:36:30.213: %NTP-4-PEERUNREACH: Peer 192.168.1.17 is unreachable
    > *Apr 3 11:36:31.213: %NTP-4-PEERUNREACH: Peer 194.137.39.68 is
    > unreachable
    > R7604_1>
    > *Apr 3 11:36:35.214: %NTP-4-PEERUNREACH: Peer 194.137.39.67 is
    > unreachable
    > *Apr 3 11:36:35.214: %NTP-4-PEERUNREACH: Peer 192.168.2.253 is
    > unreachable
    > R7604_1>
    >
    >
    Thrill5, Apr 4, 2009
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Kevin Pierce
    Replies:
    0
    Views:
    598
    Kevin Pierce
    Jul 23, 2003
  2. Lufan Chen
    Replies:
    1
    Views:
    488
    Walter Roberson
    Nov 29, 2003
  3. Digital Image Recovery
    Replies:
    1
    Views:
    1,263
  4. Digital Image Recovery

    Digital Image Recovery and Memory Stick Recovery; Recovery of Lost Photos

    Digital Image Recovery, Sep 10, 2004, in forum: Digital Photography
    Replies:
    0
    Views:
    1,109
    Digital Image Recovery
    Sep 10, 2004
  5. jam7ra
    Replies:
    0
    Views:
    1,437
    jam7ra
    May 22, 2011
Loading...

Share This Page