static arp and privilage level

Discussion in 'Cisco' started by asher78, Oct 12, 2006.

  1. asher78

    asher78

    Joined:
    Oct 12, 2006
    Messages:
    1
    hi to all,
    i am trying to configure a privilage level to a user and wanted him to do a few commands only...
    all of the commnads i gave him worked great expect 1
    one of the commands is "arp <ip address> <mac address> arpa" ... well i gave him the arp command permission and when i type the command, cisco give me an error about the he do not recognize the mac address (any mac address i put).
    here is the cisco output:

    Tiny1(config)#arp 192.168.34.50 ?
    H.H.H 48-bit hardware address of ARP entry

    Tiny1(config)#arp 192.168.34.50 0100.5e28.2232 ?
    % Unrecognized command
    Tiny1(config)#arp 192.168.34.50 0100.5e28.2232

    if i use a level 15 privilage user all is working fine.
    Show Version:
    Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.4(2)T
    so my question is ... what permissions should i give to that privileage?

    thanks in advanced.
    asher78, Oct 12, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. nderose@gmail.com
    Replies:
    0
    Views:
    639
    nderose@gmail.com
    Jul 11, 2005
  2. Learning Cisco
    Replies:
    3
    Views:
    2,037
    Walter Roberson
    Oct 15, 2005
  3. Joe.Trecokas

    Set privilage to only allow reboot

    Joe.Trecokas, Dec 28, 2005, in forum: Cisco
    Replies:
    5
    Views:
    1,417
    Joe.Trecokas
    Dec 30, 2005
  4. zillah
    Replies:
    0
    Views:
    694
    zillah
    Nov 9, 2006
  5. Darren Green

    Arp or Proxy Arp

    Darren Green, Feb 20, 2009, in forum: Cisco
    Replies:
    0
    Views:
    513
    Darren Green
    Feb 20, 2009
Loading...

Share This Page