SOHO 97 ADSL Settings

Discussion in 'Cisco' started by Simon Morgan, Sep 1, 2005.

  1. Simon Morgan

    Simon Morgan Guest

    Hi,

    I'm using the Web Setup to try and configure my SOHO 97 ADSL router.
    Whenever I try and change any settings, the progress bar that pops up
    keeps going on and on, seemingly forever. I have to kill Internet
    Explorer and when I reload Web Setup the settings haven't been changed.

    The same thing happens with Scenario Setup.

    I'm using Internet Explorer 6 with the latest Java 1.5.

    Cisco Internetwork Operating System Software
    IOS (tm) SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
    Synched to technology version 12.3(1.6)T
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Thu 04-Mar-04 01:47 by ealyon
    Image text-base: 0x800131C0, data-base: 0x80965BF8

    ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)
    ROM: SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    simon uptime is 1 hour, 33 minutes
    System returned to ROM by power-on
    System image file is "flash:soho97-k9oy1-mz.123-2.XC2.bin"

    CISCO SOHO97 (MPC857DSL) processor (revision 0x400) with 29492K/3276K bytes of memory.
    Processor board ID AMB082905KF (1758437364), with hardware revision 0000
    CPU rev number 7
    Bridging software.
    1 Ethernet/IEEE 802.3 interface(s)
    1 ATM network interface(s)
    128K bytes of non-volatile configuration memory.
    8192K bytes of processor board System flash (Read/Write)
    2048K bytes of processor board Web flash (Read/Write)

    Configuration register is 0x2102

    Thanks.

    --
    "Being a social outcast helps you stay | ''.encode('rot-13')
    concentrated on the really important |
    things, like thinking and hacking." | [ RENT THIS SPACE ]
    - Eric S. Raymond |
    Simon Morgan, Sep 1, 2005
    #1
    1. Advertising

  2. Simon Morgan

    Steve Guest

    Hi Simon,

    Have you tried...
    1. A different PC to connect to it
    2. A different IOS

    thought about....
    3. Just configuring it from IOS

    alternatively if you have CCO access:
    http://www.cisco.com/pcgi-bin/tablebuild.pl/crws

    I have 12.3(T4) if your interested in a trade of IOS as it wont run on my
    tech rev. - or a 12.2 early release if you don't need 3des crypto....

    i've been trying to get hold of a different 12.3 release for some time now
    so I would really appreciate getting hold of a different IOS to try

    Steve




    "Simon Morgan" <> wrote in message
    news:p...
    > Hi,
    >
    > I'm using the Web Setup to try and configure my SOHO 97 ADSL router.
    > Whenever I try and change any settings, the progress bar that pops up
    > keeps going on and on, seemingly forever. I have to kill Internet
    > Explorer and when I reload Web Setup the settings haven't been changed.
    >
    > The same thing happens with Scenario Setup.
    >
    > I'm using Internet Explorer 6 with the latest Java 1.5.
    >
    > Cisco Internetwork Operating System Software
    > IOS (tm) SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY

    DEPLOYMENT RELEASE SOFTWARE (fc1)
    > Synched to technology version 12.3(1.6)T
    > Technical Support: http://www.cisco.com/techsupport
    > Copyright (c) 1986-2004 by cisco Systems, Inc.
    > Compiled Thu 04-Mar-04 01:47 by ealyon
    > Image text-base: 0x800131C0, data-base: 0x80965BF8
    >
    > ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)
    > ROM: SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY

    DEPLOYMENT RELEASE SOFTWARE (fc1)
    >
    > simon uptime is 1 hour, 33 minutes
    > System returned to ROM by power-on
    > System image file is "flash:soho97-k9oy1-mz.123-2.XC2.bin"
    >
    > CISCO SOHO97 (MPC857DSL) processor (revision 0x400) with 29492K/3276K

    bytes of memory.
    > Processor board ID AMB082905KF (1758437364), with hardware revision 0000
    > CPU rev number 7
    > Bridging software.
    > 1 Ethernet/IEEE 802.3 interface(s)
    > 1 ATM network interface(s)
    > 128K bytes of non-volatile configuration memory.
    > 8192K bytes of processor board System flash (Read/Write)
    > 2048K bytes of processor board Web flash (Read/Write)
    >
    > Configuration register is 0x2102
    >
    > Thanks.
    >
    > --
    > "Being a social outcast helps you stay |

    ''.encode('rot-13')
    > concentrated on the really important |
    > things, like thinking and hacking." | [ RENT THIS SPACE ]
    > - Eric S. Raymond |
    >
    Steve, Sep 1, 2005
    #2
    1. Advertising

  3. Simon Morgan

    Steve Guest

    Sorry my mistake IOS wouldn't change CRWS as far as i am aware....

    your going to need the actual files:

    File Length Name/status
    1 792 ConfigExp.cfg
    2 474217 CRWSbHlp.html
    3 826887 CRWS_1.jar
    4 343149 CRWS_2.jar
    5 61492 CRWS_VPNLogin.jar
    6 47026 GUI.html
    7 4895 home.html
    8 252 IPCPSubnet.cfg
    9 8082 loading.gif
    10 3463 VPNLogin.html
    [1770908 bytes used, 64100 available, 1835008 total]
    2048K bytes of processor board Web flash (Read/Write)

    This is v. 3.3.0.26

    useful link:
    http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/tgcrws32.htm



    "Steve" <> wrote in message
    news:df7stk$fcu$2surf.net...
    > Hi Simon,
    >
    > Have you tried...
    > 1. A different PC to connect to it
    > 2. A different IOS
    >
    > thought about....
    > 3. Just configuring it from IOS
    >
    > alternatively if you have CCO access:
    > http://www.cisco.com/pcgi-bin/tablebuild.pl/crws
    >
    > I have 12.3(T4) if your interested in a trade of IOS as it wont run on my
    > tech rev. - or a 12.2 early release if you don't need 3des crypto....
    >
    > i've been trying to get hold of a different 12.3 release for some time now
    > so I would really appreciate getting hold of a different IOS to try
    >
    > Steve
    >
    >
    >
    >
    > "Simon Morgan" <> wrote in message
    > news:p...
    > > Hi,
    > >
    > > I'm using the Web Setup to try and configure my SOHO 97 ADSL router.
    > > Whenever I try and change any settings, the progress bar that pops up
    > > keeps going on and on, seemingly forever. I have to kill Internet
    > > Explorer and when I reload Web Setup the settings haven't been changed.
    > >
    > > The same thing happens with Scenario Setup.
    > >
    > > I'm using Internet Explorer 6 with the latest Java 1.5.
    > >
    > > Cisco Internetwork Operating System Software
    > > IOS (tm) SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY

    > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > > Synched to technology version 12.3(1.6)T
    > > Technical Support: http://www.cisco.com/techsupport
    > > Copyright (c) 1986-2004 by cisco Systems, Inc.
    > > Compiled Thu 04-Mar-04 01:47 by ealyon
    > > Image text-base: 0x800131C0, data-base: 0x80965BF8
    > >
    > > ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)
    > > ROM: SOHO97 Software (SOHO97-K9OY1-M), Version 12.3(2)XC2, EARLY

    > DEPLOYMENT RELEASE SOFTWARE (fc1)
    > >
    > > simon uptime is 1 hour, 33 minutes
    > > System returned to ROM by power-on
    > > System image file is "flash:soho97-k9oy1-mz.123-2.XC2.bin"
    > >
    > > CISCO SOHO97 (MPC857DSL) processor (revision 0x400) with 29492K/3276K

    > bytes of memory.
    > > Processor board ID AMB082905KF (1758437364), with hardware revision 0000
    > > CPU rev number 7
    > > Bridging software.
    > > 1 Ethernet/IEEE 802.3 interface(s)
    > > 1 ATM network interface(s)
    > > 128K bytes of non-volatile configuration memory.
    > > 8192K bytes of processor board System flash (Read/Write)
    > > 2048K bytes of processor board Web flash (Read/Write)
    > >
    > > Configuration register is 0x2102
    > >
    > > Thanks.
    > >
    > > --
    > > "Being a social outcast helps you stay |

    > ''.encode('rot-13')
    > > concentrated on the really important |
    > > things, like thinking and hacking." | [ RENT THIS SPACE ]
    > > - Eric S. Raymond |
    > >

    >
    >
    Steve, Sep 1, 2005
    #3
  4. Simon Morgan

    Simon Morgan Guest

    On Thu, 01 Sep 2005 22:48:43 +0100, Steve wrote:

    > Have you tried...
    > 1. A different PC to connect to it
    > 2. A different IOS
    >
    > thought about....
    > 3. Just configuring it from IOS
    >
    > alternatively if you have CCO access:
    > http://www.cisco.com/pcgi-bin/tablebuild.pl/crws


    Thanks for taking the time to reply. After many hours searching the web
    and cisco.com I finally seem to have it working!

    > I have 12.3(T4) if your interested in a trade of IOS as it wont run on
    > my tech rev. - or a 12.2 early release if you don't need 3des crypto....
    >
    > i've been trying to get hold of a different 12.3 release for some time
    > now so I would really appreciate getting hold of a different IOS to try


    Sure. You'll have to walk me through it or point me to some documentation
    I can read though I'm afraid.

    --
    "Being a social outcast helps you stay | ''.encode('rot-13')
    concentrated on the really important |
    things, like thinking and hacking." | [ RENT THIS SPACE ]
    - Eric S. Raymond |
    Simon Morgan, Sep 1, 2005
    #4
  5. Simon Morgan

    Simon Morgan Guest

    On Thu, 01 Sep 2005 22:33:39 +0000, Simon Morgan wrote:

    > Sure. You'll have to walk me through it or point me to some
    > documentation I can read though I'm afraid.


    Turns out it wasn't that involved after all:

    -rw------- 1 simon users 5170156 2005-09-01 23:43
    soho97-k9oy1-mz.123-2.XC2.bin

    --
    "Being a social outcast helps you stay | ''.encode('rot-13')
    concentrated on the really important |
    things, like thinking and hacking." | [ RENT THIS SPACE ]
    - Eric S. Raymond |
    Simon Morgan, Sep 2, 2005
    #5
  6. Simon Morgan

    Simon Morgan Guest

    On Thu, 01 Sep 2005 22:59:06 +0100, Steve wrote:

    > Sorry my mistake IOS wouldn't change CRWS as far as i am aware....
    >
    > your going to need the actual files:


    Is there anywhere to download the latest version and get it onto the
    router without using CRWS itself? It's not urgent now that I have things
    running but I don't like the idea of having a completely broken and
    useless version of it taking up memory in my router.

    --
    "Being a social outcast helps you stay | ''.encode('rot-13')
    concentrated on the really important |
    things, like thinking and hacking." | [ RENT THIS SPACE ]
    - Eric S. Raymond |
    Simon Morgan, Sep 2, 2005
    #6
  7. Simon Morgan

    Steve Guest

    Hey Simon - good news its all up and running!!

    If you can give me a hand with sending us your IOS (to
    ) I'd be very grateful.

    Steps involved are simple:

    1. Download TFTP server from:
    http://www.solarwinds.net/Tools/Free_tools/TFTP_Server/index.htm
    Install this on your PC - uninstalls cleanly when your finished but i'd
    recommend keeping it to backup your configs and flash!!

    2. Telnet to the router - EN priveledge level
    Issue the show flash command to check the available space in the flash
    memory.
    Router# show flash

    3) Back up the existing Cisco IOS software image stored.
    Router# copy flash tftp
    Source filename []? soho97-k9oy1-mz.123-2.XC2.bin
    Address or name of remote host []? 10.1.1.1 ---> Your PC address
    Destination filename [soho97-k9oy1-mz.123-2.XC2.bin]?
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    !!!!!!!!!!!!!!!!!!!!!!!!
    3802992 bytes copied in 27.276 secs (140851 bytes/sec)

    The file soho97-k9oy1-mz.123-2.XC2.bin should now be on your PC in your TFTP
    directory.

    I'll be back from hols on the 22nd sept. and i'll send you:
    soho97-k9oy1-mz.123-4.T4.bin and soho97-k9oy1-mz.122-8.YN.bin (if you want
    it)

    Reason i'm after it is the 12.3's have problems with PAT - depending on the
    tech revision - i'm only after a revision which supports crypto and PAT....

    ALSO - sign up to this forum - its free and v. good for support!
    http://www.dslreports.com/forum/equip,cis

    further interesting links from this site and other sites:
    http://www.dslreports.com/faq/7766

    http://www.cisco.com/warp/public/474/

    http://www.cisco.com/en/US/products/sw/secursw/ps5318/products_qanda_item0900aecd800fd11b.shtml
    One step lock-down --- down the bottom

    http://www.dslreports.com/forum/remark,12024778?hilite=tftp flash
    ---->> complete backup flash instructions and upload new flash

    Can't stress this enough but backup your flash and running config if your
    going to play with the unit.

    Thanks mate
    Steve
    Steve, Sep 2, 2005
    #7
  8. Simon Morgan

    Simon Morgan Guest

    On Fri, 02 Sep 2005 08:28:28 +0100, Steve wrote:

    > If you can give me a hand with sending us your IOS (to
    > ) I'd be very grateful.


    Done.

    > I'll be back from hols on the 22nd sept. and i'll send you:
    > soho97-k9oy1-mz.123-4.T4.bin and soho97-k9oy1-mz.122-8.YN.bin (if you
    > want it)


    The more the merrier! I don't suppose you or anyone else could tell me the
    main differences between those versions and the one I'm currently running?

    Thanks again for all your help and advice.

    --
    "Being a social outcast helps you stay | ''.encode('rot-13')
    concentrated on the really important |
    things, like thinking and hacking." | [ RENT THIS SPACE ]
    - Eric S. Raymond |
    Simon Morgan, Sep 2, 2005
    #8
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. UKuser
    Replies:
    3
    Views:
    2,090
    Richard Antony Burton
    Jan 21, 2004
  2. Replies:
    1
    Views:
    3,819
    Roel Villerius
    Apr 19, 2006
  3. Alex Clarke

    Sweex ADSL Annex-A wired ADSL Router Switch

    Alex Clarke, Oct 15, 2005, in forum: Computer Support
    Replies:
    2
    Views:
    5,728
    Alex Clarke
    Oct 16, 2005
  4. Adam Aglionby

    ADSL router as ATA without ADSL bit?

    Adam Aglionby, Aug 24, 2005, in forum: UK VOIP
    Replies:
    2
    Views:
    1,507
  5. Supersleuth

    soho adsl modems

    Supersleuth, Mar 20, 2010, in forum: Cisco
    Replies:
    1
    Views:
    542
    Doug McIntyre
    Mar 20, 2010
Loading...

Share This Page