Sipura SPA-2100 Dial Plan

Discussion in 'VOIP' started by The Cable Guy, Feb 20, 2005.

  1. Anyone any idea how I can write a dial plan that simply adds 01247 to any 6-
    digit number dialled but leaves numbers starting with 0 to be dialled as
    entered?

    Thanks.
     
    The Cable Guy, Feb 20, 2005
    #1
    1. Advertising

  2. The Cable Guy

    Ivor Jones Guest

    The Cable Guy wrote:
    > Anyone any idea how I can write a dial plan that simply adds 01247
    > to any 6- digit number dialled but leaves numbers starting with 0
    > to be dialled as entered?
    >
    > Thanks.


    I've had a look in the user manual for my SPA-2000 which I assume would
    work in the same way, but can't figure it out..! If you do find a
    solution, I'll be interested as I'd like to do something similar.

    Ivor
     
    Ivor Jones, Feb 20, 2005
    #2
    1. Advertising

  3. Ivor Jones wrote:
    || The Cable Guy wrote:
    ||| Anyone any idea how I can write a dial plan that simply adds 01247
    ||| to any 6- digit number dialled but leaves numbers starting with 0
    ||| to be dialled as entered?
    |||
    ||| Thanks.
    ||
    || I've had a look in the user manual for my SPA-2000 which I assume
    || would work in the same way, but can't figure it out..! If you do
    || find a solution, I'll be interested as I'd like to do something
    || similar.
    ||
    || Ivor

    There's quite a useful forum here http://voxilla.com/ with a whole section
    dedicated to Sipura users.

    I'll let you know if I get to grips with it.
     
    The Cable Guy, Feb 20, 2005
    #3
  4. The Cable Guy

    Ian Guest

    "The Cable Guy" <21.com> wrote in message news:<xX3Sd.19385$>...
    > Anyone any idea how I can write a dial plan that simply adds 01247 to any 6-
    > digit number dialled but leaves numbers starting with 0 to be dialled as
    > entered?
    >
    > Thanks.


    This seems to be the bit you need to set up
    Looks fairly normal and far simpler that the Cisco ATA

    Subsequence Substitution:
    A subsequence of keys (possibly empty) can be automatically replaced
    with a different subsequence
    using an angle bracket notation: ‘<' dialed-subsequence ‘:'
    transmitted-subsequence ‘>'. So, for
    example, "<8:1650>xxxxxxx" would match "85551212" and transmit
    "16505551212".

    so in your case it would be

    ( 0 xxxx xxxxxx |00 xxxxxx xxxxxx | <:01247> xxxxxx )

    Or thats how it reads and how I woul expect it to work,
    As the first entry says anything starting 0 with 10 digits to follow
    send as dialed same for 00 but everything else dial 01247 before it.
    if that doesnt substitute correctly you may have to do <2:012472>
    xxxxx etc for 2 to 8

    Good luck

    Ian
     
    Ian, Feb 20, 2005
    #4
  5. Ian wrote:
    || "The Cable Guy" <21.com> wrote in message
    || news:<xX3Sd.19385$>...
    ||| Anyone any idea how I can write a dial plan that simply adds 01247
    ||| to any 6-
    ||| digit number dialled but leaves numbers starting with 0 to be
    ||| dialled as
    ||| entered?
    |||
    ||| Thanks.
    ||
    || This seems to be the bit you need to set up
    || Looks fairly normal and far simpler that the Cisco ATA
    ||
    || Subsequence Substitution:
    || A subsequence of keys (possibly empty) can be automatically replaced
    || with a different subsequence
    || using an angle bracket notation: '<' dialed-subsequence ':'
    || transmitted-subsequence '>'. So, for
    || example, "<8:1650>xxxxxxx" would match "85551212" and transmit
    || "16505551212".
    ||
    || so in your case it would be
    ||
    || ( 0 xxxx xxxxxx |00 xxxxxx xxxxxx | <:01247> xxxxxx )
    ||
    || Or thats how it reads and how I woul expect it to work,
    || As the first entry says anything starting 0 with 10 digits to follow
    || send as dialed same for 00 but everything else dial 01247 before it.
    || if that doesnt substitute correctly you may have to do <2:012472>
    || xxxxx etc for 2 to 8
    ||
    || Good luck
    ||
    || Ian

    (<:01247>[2-9]xxxxxS0|0[1-8]xxxxxxxxxS0|001[2-9]xx[2-9]xxxxxxS0|00[2-9]xxxxx)

    The above is what I've ended up with. SO is the send now command. I've not
    tested any international calls but the UK part works a treat.

    Thanks for your input
     
    The Cable Guy, Feb 22, 2005
    #5
  6. Ivor Jones wrote:
    || The Cable Guy wrote:
    ||| Anyone any idea how I can write a dial plan that simply adds 01247
    ||| to any 6- digit number dialled but leaves numbers starting with 0
    ||| to be dialled as entered?
    |||
    ||| Thanks.
    ||
    || I've had a look in the user manual for my SPA-2000 which I assume
    || would work in the same way, but can't figure it out..! If you do
    || find a solution, I'll be interested as I'd like to do something
    || similar.
    ||
    || Ivor

    (<:01247>[2-9]xxxxxS0|0[1-8]xxxxxxxxxS0|001[2-9]xx[2-9]xxxxxxS0|00[2-9]xxxxx)

    It works.

    I've not tested the last 2 elements yet - USA 001[2-9} nor Rest of World
    00[2-9] - local numbers I can now dial the six-digit number, the second
    element allows 11 digit numbers starting 01 to 09 to be dialed. Shorter
    numbers(BT's cust serv no. 0800800150) still go through but with a 3 second
    delay - unless I press the # key at the end of the number when it dials
    immediately.
     
    The Cable Guy, Feb 22, 2005
    #6
  7. The Cable Guy

    Ivor Jones Guest

    The Cable Guy wrote:

    [snip]

    > (<:01247>[2-9]xxxxxS0|0[1-8]xxxxxxxxxS0|001[2-9]xx[2-9]xxxxxxS0|00[2-9]xxxxx)
    >
    > It works.
    >
    > I've not tested the last 2 elements yet - USA 001[2-9} nor Rest of
    > World 00[2-9] - local numbers I can now dial the six-digit number,
    > the second element allows 11 digit numbers starting 01 to 09 to be
    > dialed. Shorter numbers(BT's cust serv no. 0800800150) still go
    > through but with a 3 second delay - unless I press the # key at the
    > end of the number when it dials immediately.


    Can you dial 7-digit SIP numbers directly..?

    Ivor
     
    Ivor Jones, Feb 22, 2005
    #7
  8. Ivor Jones wrote:
    || The Cable Guy wrote:
    ||
    || [snip]
    ||
    |||
    (<:01247>[2-9]xxxxxS0|0[1-8]xxxxxxxxxS0|001[2-9]xx[2-9]xxxxxxS0|00[2-9]xxxxx)
    |||
    ||| It works.
    |||
    ||| I've not tested the last 2 elements yet - USA 001[2-9} nor Rest of
    ||| World 00[2-9] - local numbers I can now dial the six-digit number,
    ||| the second element allows 11 digit numbers starting 01 to 09 to be
    ||| dialed. Shorter numbers(BT's cust serv no. 0800800150) still go
    ||| through but with a 3 second delay - unless I press the # key at the
    ||| end of the number when it dials immediately.
    ||
    || Can you dial 7-digit SIP numbers directly..?
    ||
    || Ivor

    I don't know anyone with a sip number - I guess the answer with the above
    plan would be "No" because as soon as the sixth digit were dialled, 01247
    would be added to the beginning. I'll do some more research..........

    Are you aware of any SIP test numbers I could try?
     
    The Cable Guy, Feb 22, 2005
    #8
  9. Ivor Jones wrote:
    || The Cable Guy wrote:
    ||
    || [snip]
    ||
    |||
    (<:01247>[2-9]xxxxxS0|0[1-8]xxxxxxxxxS0|001[2-9]xx[2-9]xxxxxxS0|00[2-9]xxxxx)
    |||
    ||| It works.
    |||
    ||| I've not tested the last 2 elements yet - USA 001[2-9} nor Rest of
    ||| World 00[2-9] - local numbers I can now dial the six-digit number,
    ||| the second element allows 11 digit numbers starting 01 to 09 to be
    ||| dialed. Shorter numbers(BT's cust serv no. 0800800150) still go
    ||| through but with a 3 second delay - unless I press the # key at the
    ||| end of the number when it dials immediately.
    ||
    || Can you dial 7-digit SIP numbers directly..?
    ||
    || Ivor

    I guess |[1-9]xxxxxxS0 would allow for that - I could be completely wrong,
    unless you've got a 7 digit SIP test number I could try.
     
    The Cable Guy, Feb 22, 2005
    #9
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Mike Schumann

    Sipura SPA-3000 Dial Plan Pause Example

    Mike Schumann, Sep 24, 2004, in forum: VOIP
    Replies:
    0
    Views:
    789
    Mike Schumann
    Sep 24, 2004
  2. Mark
    Replies:
    6
    Views:
    2,258
    David Floyd
    Aug 11, 2005
  3. news

    Where to buy Sipura SPA-2100?

    news, Oct 20, 2005, in forum: UK VOIP
    Replies:
    13
    Views:
    1,119
    Andrew Gabriel
    Oct 22, 2005
  4. Phil McKerracher

    Sipura SPA-2100 problems

    Phil McKerracher, Apr 29, 2006, in forum: UK VOIP
    Replies:
    3
    Views:
    6,124
    paul hayes
    May 2, 2006
  5. Marc Zirnheld

    How NOT to dial with Sipura's dial plan ?

    Marc Zirnheld, Mar 25, 2008, in forum: UK VOIP
    Replies:
    3
    Views:
    1,620
    Marc Zirnheld
    Mar 26, 2008
Loading...

Share This Page