Server Etherchanneling with 3550 and Intel pro 100S dual nic card.

Discussion in 'Cisco' started by Jeff Vautour, Nov 18, 2003.

  1. Jeff Vautour

    Jeff Vautour Guest

    Hi All,

    I am doing some testing with 3550-48 port switch and a server. The server
    has installed a Intel Pro 100S dual nic card connected to the switch. With
    the intel proset the cards are set up as a team for Fast Etherchanneling on
    VLAN30 with an IP address of 192.168.30.30. On the switch side I have
    configured the Ports Fa0/1 and Fa0/2 identically, they have Portfast turned
    on, Are a member of VLAN 30. When I try to create the Port-Channel 1 with
    mode as "on". Turning on SPAN for Fa0/1 and Fa0/2 I get the message that
    these ports are unsuitable and cannot join any Port-Channel. The Fa0/1 and
    Fa0/2 basically ignore the port-channel and I can hit the shared IP
    192.168.30.30. However, I am not getting the 200MB throughput.

    Any help would be most appreciated.
    Thanks,
    Jeff
    Jeff Vautour, Nov 18, 2003
    #1
    1. Advertising

  2. Jeff Vautour

    akg126

    Joined:
    Apr 29, 2008
    Messages:
    1
    Hi

    I believe this is because your ports are in SPAN and if you are doing SPAN on ports which you want to add on port-channel, ports will not get added to it.
    So do not SPAN ports which you want to add on port-channel.
    akg126, Apr 29, 2008
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. JohnNews
    Replies:
    10
    Views:
    6,624
    One Step Beyond
    Oct 20, 2003
  2. Steinar Haug
    Replies:
    0
    Views:
    579
    Steinar Haug
    Oct 20, 2003
  3. roberthob

    an Intel PRO/DSL 2100 or Intel PRO/DSL 2200 Modem

    roberthob, Sep 25, 2005, in forum: Computer Support
    Replies:
    0
    Views:
    1,575
    roberthob
    Sep 25, 2005
  4. Johnatthon

    Wireless NIC & Wired NIC Bridging

    Johnatthon, May 2, 2006, in forum: Wireless Networking
    Replies:
    1
    Views:
    915
    Johnatthon
    May 2, 2006
  5. =?Utf-8?B?R0dpbk5K?=

    XP - Allow wired NIC to use the wireless NIC (packet forwarding)

    =?Utf-8?B?R0dpbk5K?=, Jul 14, 2006, in forum: Wireless Networking
    Replies:
    1
    Views:
    734
    =?Utf-8?B?R0dpbk5K?=
    Jul 14, 2006
Loading...

Share This Page