Secondary address problem

Discussion in 'Cisco' started by Jerry Bacon, Jan 28, 2004.

  1. Jerry Bacon

    Jerry Bacon Guest

    I have a 3620 running 12.1(2)T IP-Plus. In my startup-config I have:

    interface FastEthernet0/0
    ip address 65.xx.yy.33 255.255.255.224 secondary
    ip address 65.xx.zz.249 255.255.255.252 secondary
    ip address 192.168.77.1 255.255.255.0 secondary
    ip address 65.xx.yy.169 255.255.255.248 secondary
    ip address 65.xx.zz.1 255.255.255.128
    ip access-group 111 in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    duplex auto
    speed auto

    However, when the router restarts, I get only the primary address and
    none of the secondaries. Like this:

    interface FastEthernet0/0
    ip address 65.xx.xx.1 255.255.255.128
    ip access-group 111 in

    Occasionally, I'll even get:

    ip address assigned

    Any idea what to do to fix this?

    Thanks.
    Jerry Bacon, Jan 28, 2004
    #1
    1. Advertising

  2. In article <Xns947E9C81BD57Ajbacontelcom@63.223.5.250>,
    Jerry Bacon <> wrote:
    :I have a 3620 running 12.1(2)T IP-Plus. In my startup-config I have:

    :interface FastEthernet0/0
    : ip address 65.xx.yy.33 255.255.255.224 secondary
    : ip address 65.xx.zz.249 255.255.255.252 secondary
    : ip address 192.168.77.1 255.255.255.0 secondary
    : ip address 65.xx.yy.169 255.255.255.248 secondary
    : ip address 65.xx.zz.1 255.255.255.128

    I don't know if it will help, but you could -try- moving the
    primary address setting to be first.
    --
    The Knights Of The Lambda Calculus aren't dead --this is their normal form!
    Walter Roberson, Jan 29, 2004
    #2
    1. Advertising

  3. In article <bv9ijn$d22$>, Walter Roberson says...
    >
    >In article <Xns947E9C81BD57Ajbacontelcom@63.223.5.250>,
    >Jerry Bacon <> wrote:
    >:I have a 3620 running 12.1(2)T IP-Plus. In my startup-config I have:
    >
    >:interface FastEthernet0/0
    >: ip address 65.xx.yy.33 255.255.255.224 secondary
    >: ip address 65.xx.zz.249 255.255.255.252 secondary
    >: ip address 192.168.77.1 255.255.255.0 secondary
    >: ip address 65.xx.yy.169 255.255.255.248 secondary
    >: ip address 65.xx.zz.1 255.255.255.128
    >
    >I don't know if it will help, but you could -try- moving the
    >primary address setting to be first.
    >--


    And also monitor the console at bootup to see if there are any error messages.
    I've caught a few config problems this way.

    --Mag
    Steve Magruser, Jan 29, 2004
    #3
  4. Jerry Bacon

    Hansang Bae Guest

    In article <Xns947E9C81BD57Ajbacontelcom@63.223.5.250>, jbacon-no@spam-
    telcomplus.net says...
    > I have a 3620 running 12.1(2)T IP-Plus. In my startup-config I have:
    >
    > interface FastEthernet0/0
    > ip address 65.xx.yy.33 255.255.255.224 secondary
    > ip address 65.xx.zz.249 255.255.255.252 secondary
    > ip address 192.168.77.1 255.255.255.0 secondary
    > ip address 65.xx.yy.169 255.255.255.248 secondary
    > ip address 65.xx.zz.1 255.255.255.128
    > ip access-group 111 in
    > no ip redirects
    > no ip unreachables
    > no ip proxy-arp
    > duplex auto
    > speed auto
    >
    > However, when the router restarts, I get only the primary address and
    > none of the secondaries. Like this:
    >
    > interface FastEthernet0/0
    > ip address 65.xx.xx.1 255.255.255.128
    > ip access-group 111 in
    >
    > Occasionally, I'll even get:
    >
    > ip address assigned
    >
    > Any idea what to do to fix this?


    This is not normal. Since you're running the T train, try a general
    release

    --

    hsb

    "Somehow I imagined this experience would be more rewarding" Calvin
    *************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
    ********************************************************************
    Due to the volume of email that I receive, I may not not be able to
    reply to emails sent to my account. Please post a followup instead.
    ********************************************************************
    Hansang Bae, Jan 29, 2004
    #4
  5. Jerry Bacon

    Jerry Bacon Guest

    -cnrc.gc.ca (Walter Roberson) wrote in news:bv9ijn$d22$1
    @canopus.cc.umanitoba.ca:

    > I don't know if it will help, but you could -try- moving the
    > primary address setting to be first.


    I've tried that and it doesn't help. Also, when I save the running-config,
    they always get saved that way.
    Jerry Bacon, Jan 29, 2004
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Keith Hall
    Replies:
    3
    Views:
    1,388
    Keith Hall
    Dec 17, 2003
  2. Mathias Koerber

    secondary address in SDM?

    Mathias Koerber, Jun 10, 2004, in forum: Cisco
    Replies:
    0
    Views:
    446
    Mathias Koerber
    Jun 10, 2004
  3. chaidan
    Replies:
    1
    Views:
    1,738
    Pete Mainwaring
    Aug 25, 2004
  4. Mikhael47
    Replies:
    1
    Views:
    10,757
    mcaissie
    Sep 21, 2004
  5. Rob
    Replies:
    1
    Views:
    1,385
    Walter Roberson
    May 21, 2005
Loading...

Share This Page