Routing under 2 different subnets

Discussion in 'Cisco' started by magusyilie@hotmail.com, Sep 28, 2006.

  1. magusyilie@hotmail.com

    magusyilie@hotmail.com

    Joined:
    Sep 28, 2006
    Messages:
    1
    I am needing to setup a router to be able to route between 2 different subnets with different masks. The setup i have is as follows.

    My routers setup is
    RouterNR1
    FastEthernet0/0 10.80.0.1 255.248.0.0
    FastEthernet0/1 192.168.0.241 255.255.255.0
    Serial0/0 10.88.0.2 255.248.0.0

    using RIP
    network 10.0.0.0
    network 192.168.0.0

    after this i have 3 more routers, NR2, NR3, and NR4. On NR1 i can ping the router i have the 192 address from using ping 192.168.0.1 however NR2, NR3, and NR4 can not ping 192.168.0.1. How do i get these other router recognize the route to 192.168.0.241.
     
    magusyilie@hotmail.com, Sep 28, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. John Kotuby

    Wireless Network and Wired LAN on different subnets

    John Kotuby, Apr 27, 2005, in forum: Wireless Networking
    Replies:
    0
    Views:
    1,153
    John Kotuby
    Apr 27, 2005
  2. Brian Bergin

    NAT 2 different subnets through 2620

    Brian Bergin, Dec 23, 2003, in forum: Cisco
    Replies:
    2
    Views:
    597
    Brian Bergin
    Dec 24, 2003
  3. Jonathan
    Replies:
    13
    Views:
    8,589
    Jonathan
    Jul 26, 2004
  4. Asger
    Replies:
    1
    Views:
    883
    biteater
    May 23, 2008
  5. jfalken@socket.net
    Replies:
    4
    Views:
    1,473
    Trendkill
    Aug 29, 2008
Loading...

Share This Page