Routing Individual addresses

Discussion in 'Cisco' started by moomooo, Apr 27, 2006.

  1. moomooo

    moomooo Guest

    I have two separate individual IP's routed down to us from our ISP and I
    have a Class C /29 subnet giving me 6 usable Public IP's.

    I would like to use the two separate individual IP's for my Cisco 827 router
    & my firewalls ext interface. Also I would like to route the /29 subnet to
    a DMZ segment connected to the firewall.

    One problem, ISP requires a single address assigned to the Dialer interface
    from the /29 subnet. Its negotiated upon connection.

    Currently I have my public servers protected by ACL's on the 827. Then have
    firewall to protect LAN. Is there any advantage of moving my DMZ to a
    third NIC behind my firewall?

    What would be the best approach? Not sure if I could have a /29 address on
    my router and individually route the rest of the subnet one by one to DMZ
    behind firewall.
     
    moomooo, Apr 27, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Alistair Young
    Replies:
    2
    Views:
    4,530
  2. zher
    Replies:
    2
    Views:
    9,093
  3. Frank L.
    Replies:
    0
    Views:
    956
    Frank L.
    Jun 28, 2006
  4. Martin Gallagher
    Replies:
    0
    Views:
    485
    Martin Gallagher
    Feb 7, 2010
  5. JF Mezei
    Replies:
    0
    Views:
    535
    JF Mezei
    Feb 7, 2010
Loading...

Share This Page