Received non-routine Notify message: Invalid ID info

Discussion in 'Cisco' started by f.pusch@klopotek.de, Aug 19, 2005.

  1. Guest

    Hello,
    i have configured Site-to-site VPN between two Locations.
    Head Office: Cisco VPN 3005
    Branch Office: ISA Server 2004

    In the IPSec configuration there are configured some local LANs on both
    sites, e.g.
    Head Office: 10.201.132.0/21 and 10.3.121.0/24
    Branch Office: 10.201.137.0/25

    Internal IP Interface of VPN 3005 is 10.3.121.10

    Traffic between 10.201.132.0/21 and 10.201.137.0/25 is possible in both
    directions.
    Traffic from 10.201.137.0/25 to 10.3.121.0/24 is prossible, but Traffic
    from 10.3.121.0/24 to 10.201.137.0/25 is only possible, if traffic runs
    from 10.201.137.0/25 to 10.3.121.0/24. Means, the tunnel between these
    ranges is only establish from Branch Office (ISA Server 2004), not from
    Head Office (Cisco VPN 3005).
    In last case, if Cisco VPN 3005 should open the tunnel, on Cisco VPN
    3005 I see the messages:
    "Received non-routine Notify message: Invalid ID info (18)"
    But i dont know, what this means.

    Why does establishing is possible in one direction, but not in the
    other?

    Can anybody help me?

    Best regards,
    Frank Pusch
    , Aug 19, 2005
    #1
    1. Advertising

  2. Hi Frank,

    This looks like your lists don't match on both sides, they need to be
    the EXACT opposite of each other.

    Brad Reese
    BradReese.Com Cisco Repair Service Experts
    http://www.bradreese.com/index.htm#EXPERTS
    1293 Hendersonville Road, Suite 17
    Asheville, North Carolina USA 28803
    USA/Canada Toll Free: 877-549-2680
    International: 828-277-7272
    United Kingdom: 44-20-70784294
    www.BradReese.Com, Aug 19, 2005
    #2
    1. Advertising

  3. Guest

    Many many thanks.
    May be it was to late, or I need more coffee.
    There was a mistake in configuration on VPN3005: 10.3.121.10/0.0.0.255
    instead of 10.3.121.0/0.0.0.255
    Now it works correctly in both directions.

    Best regards, Frank
    , Aug 22, 2005
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. reo
    Replies:
    0
    Views:
    4,131
  2. Unsigned

    Defective Search Routine

    Unsigned, Jul 11, 2003, in forum: Computer Support
    Replies:
    2
    Views:
    457
    pcbutts1
    Jul 11, 2003
  3. Justin
    Replies:
    14
    Views:
    1,117
    Richard C.
    Dec 18, 2003
  4. Stan Jensen
    Replies:
    3
    Views:
    457
    Mike Dobony
    Dec 24, 2003
  5. Hank Sniadoch

    Hank Sniadoch, Aug 20, 2004, in forum: Computer Information
    Replies:
    1
    Views:
    481
    Wizard
    Aug 20, 2004
Loading...

Share This Page