Re: which IOS for following cisco 3640

Discussion in 'Cisco' started by John Bacon, Jul 22, 2003.

  1. John Bacon

    John Bacon Guest

    Your router will support 12.3.1a.......Since the IPv4 exploit was released,
    Cisco wants you to go to 12.3....


    JB
    www.helpwithcisco.com
    www.nerdsnews.org

    "NNTP" <> wrote in message
    news:...
    > I need the latest and greatest IOS, which one should I get? can I get
    > 12.3?
    >
    >
    > Router_3640#show flash:
    >
    > System flash directory:
    > File Length Name/status
    > 1 5085656 aaa0751.bin [deleted]
    > 2 5085656 aaa0751.bin
    > [10171440 bytes used, 23382992 available, 33554432 total]
    > 32768K bytes of processor board System flash (Read/Write)
    >
    > Router_3640#show ver
    > Cisco Internetwork Operating System Software
    > IOS (tm) 3600 Software (C3640-D-M), Version 12.0(5)T1, RELEASE
    > SOFTWARE (fc1)
    > Copyright (c) 1986-1999 by cisco Systems, Inc.
    > Compiled Tue 17-Aug-99 18:55 by cmong
    > Image text-base: 0x600088F0, data-base: 0x60916000
    >
    > ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
    > SOFTWARE (
    > fc1)
    >
    > Router_3640 uptime is 10 weeks, 3 days, 9 hours, 46 minutes
    > System returned to ROM by reload
    > System image file is "flash:aaa0751.bin"
    >
    > cisco 3640 (R4700) processor (revision 0x00) with 61440K/4096K bytes
    > of memory.
    > Processor board ID 17633543
    > R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
    > Bridging software.
    > X.25 software, Version 3.0.0.
    > 2 Ethernet/IEEE 802.3 interface(s)
    > 1 FastEthernet/IEEE 802.3 interface(s)
    > 2 Serial network interface(s)
    > DRAM configuration is 64 bits wide with parity disabled.
    > 125K bytes of non-volatile configuration memory.
    > 32768K bytes of processor board System flash (Read/Write)
    >
    > Configuration register is 0x2102
    >
    >
    > Router_3640#show ip int b
    > Interface IP-Address OK? Method Status
    > Protocol
    > Ethernet0/0 xxx.xx.xx.4 YES NVRAM up
    > up
    > Serial0/0 unassigned YES NVRAM up
    > up
    > Serial0/0.1 10.100.10.1 YES NVRAM down
    > down
    > Serial0/0.2 10.100.11.1 YES NVRAM up
    > up
    > Serial0/0.3 10.100.12.1 YES NVRAM up
    > up
    > Ethernet0/1 unassigned YES NVRAM up
    > up
    > Serial0/1 unassigned YES NVRAM administratively
    > down down
    > FastEthernet1/0 xxx.xx.75.1 YES NVRAM up
    > up
     
    John Bacon, Jul 22, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Walter Roberson

    Re: which IOS for following cisco 3640

    Walter Roberson, Jul 22, 2003, in forum: Cisco
    Replies:
    2
    Views:
    2,139
  2. tige
    Replies:
    1
    Views:
    7,224
    Johnson_dk
    Jun 30, 2004
  3. Mike Rahl
    Replies:
    1
    Views:
    1,257
    Trendkill
    May 30, 2007
  4. benchmark
    Replies:
    10
    Views:
    1,885
    benchmark
    Jul 29, 2007
  5. Giuen
    Replies:
    0
    Views:
    1,018
    Giuen
    Sep 12, 2008
Loading...

Share This Page