Re: Vastly different ping times to two different servers in the sameroom...what can I do?

Discussion in 'NZ Computing' started by Tony, Jun 10, 2008.

  1. Tony

    Tony Guest

    Southern Kiwi wrote:
    > I ping each of the servers, one comes back at about 130, the other at 350+.
    >
    > Here is the slow one.........
    > Tracing route to 202.60.88.27 over a maximum of 30 hops
    >
    > 1 1 ms <1 ms <1 ms . [192.222.2.1]
    > 2 65 ms 79 ms 69 ms 218.231.61.98
    > 3 128 ms 78 ms 78 ms
    > ge-1-3-0-872-ie1-international.telstraclear.net[218.101.61.169]
    > 4 81 ms 80 ms 83 ms ge-0-2-0-1.xcore1.acld.telstraclear.net [203.98.50.251]
    > 5 211 ms 211 ms 213 ms so.jb.wils.telstraclear.net [203.98.42.66]
    > 6 207 ms 205 ms 204 ms GigabitEthernet5-1.GW4.LAX1.ALTER.NET [157.130.2
    > 45.21]
    > 7 208 ms 206 ms 203 ms 0.so-2-0-0.XL2.LAX1.ALTER.NET [152.63.53.62]
    > 8 284 ms 283 ms 282 ms 0.so-5-3-0.XL4.NYC4.ALTER.NET [152.63.0.5]
    > 9 282 ms 276 ms 276 ms GigabitEthernet7-0-0.GW18.NYC4.ALTER.NET [152.63
    > .22.229]
    > 10 343 ms 279 ms 298 ms 157.130.1.150
    > 11 321 ms 334 ms 316 ms so-0-0-0.sjc11.ip.tiscali.net [213.200.80.89]
    > 12 339 ms 336 ms 359 ms asianetcom-gw.ip.tiscali.net [213.200.66.242]
    > 13 306 ms 307 ms 310 ms po4-0.cr1.syd1.asianetcom.net [202.147.50.158]
    > 14 308 ms 307 ms 306 ms gi1-0.gw2.syd1.asianetcom.net [202.147.40.178]
    > 15 322 ms 368 ms 322 ms gi0-2.gw1.bne1.asianetcom.net [202.147.42.85]
    > 16 * * * Request timed out.
    > 17 324 ms 324 ms 322 ms 202.60.88.27
    >
    > Both servers are in the same room in Sydney, the routes to them from
    > here are markedly different, the slow goes via Jupiter (ok, not Jupiter,
    > but close)
    >
    > Any ideas?
    >
    > Can I change the route or is that determined by my ISP?


    What about a trace to the fast one ? One thing to note is that path is
    outgoing via Los Angeles.

    note the speed difference with my trace going direct to Australia -

    core2_na#traceroute 202.60.88.27

    Type escape sequence to abort.
    Tracing the route to 202.60.88.27

    1 g0-0-98.icore1.safenz.net (202.170.160.47) 4 msec 0 msec 0 msec
    2 Gi1-0-418.gw1.AKL1.asianetcom.net (203.192.166.65) 36 msec 36 msec 36 msec
    3 ge-1-2-0-0.gw4.akl1.asianetcom.net (202.147.55.222) 36 msec 36 msec 36
    msec
    4 po4-0.cr2.syd1.asianetcom.net (202.147.55.254) 36 msec 36 msec 36 msec
    5 po12-2.gw2.syd1.asianetcom.net (202.147.40.126) 32 msec 36 msec 36 msec
    6 Pacific-Internet.gw2.syd1.asianetcom.net (203.192.166.150) 36 msec 56
    msec 36 msec
    7 g5-2.switch2.bne.pacific.net.au (210.23.140.194) 48 msec 48 msec 44 msec
    8 vl64.switch2.bne.pacific.net.au (61.8.2.250) 48 msec 44 msec 48 msec
    9 g1-hs.core-bne.servers.net.au (203.143.242.154) 48 msec 48 msec 44 msec
    10 202.60.88.27 48 msec 52 msec 48 msec


    This routing is determined by your ISP, I would say return traffic is
    transiting LA as well by the speed indicated.
     
    Tony, Jun 10, 2008
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. GS
    Replies:
    8
    Views:
    21,388
  2. Dovelet
    Replies:
    6
    Views:
    3,020
  3. Moo

    Boot Times and Recycle Times

    Moo, Nov 19, 2004, in forum: Digital Photography
    Replies:
    3
    Views:
    381
    Bob Harrington
    Nov 20, 2004
  4. Pichi_b
    Replies:
    1
    Views:
    808
    Pichi_b
    Mar 30, 2007
  5. sandhyashyamsundar

    Different Ping response times

    sandhyashyamsundar, Jul 3, 2009, in forum: Hardware
    Replies:
    1
    Views:
    3,259
    L8ians
    Jul 7, 2009
Loading...

Share This Page