Re: Upgrading Cisco 7507 routers

Discussion in 'Cisco' started by Woon, Jul 14, 2003.

  1. Woon

    Woon Guest

    Any ideas??

    "Woon" <> wrote in message
    news:beavi2$32lct$...
    > Hi guys,
    > I have an old cisco 7507 router and we are planning to upgrade it the IOS
    > version to a 12.x one. I was told however that it requires a microcode
    > upgrade, and possible memory upgrade as well. However, I'm not sure what

    are
    > microcodes.. Can anyone suggest a helpful link/explain what microcode
    > version would be required, whether the router is upgradeable, or is it

    worth
    > upgrading.. Many thanks,
    >
    > Woon
    >
    > The specs are:
    > Cisco Internetwork Operating System Software
    > IOS (tm) RSP Software (RSP-DSV-M), Version 11.2(14), RELEASE SOFTWARE

    (fc1)
    > ROM: System Bootstrap, Version 5.3(16645) [szhang 571], INTERIM SOFTWARE
    > BOOTFLASH: RSP Software (RSP-BOOT-M), Version 11.2(14), RELEASE SOFTWARE
    > (fc1)
    >
    > cisco RSP2 (R4600) processor with 65536K bytes of memory.
    > R4600 processor, Implementation 32, Revision 2.0
    > G.703/E1 software, Version 1.0.
    > Bridging software.
    > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
    > Chassis Interface.
    > 1 EIP controller (6 Ethernet).
    > 1 FSIP controller (4 Serial).
    > 1 AIP controller (1 ATM).
    > 1 VIP2 controller (1 FastEthernet)(4 Ethernet).
    > 1 FEIP controller (2 FastEthernet).
    > 10 Ethernet/IEEE 802.3 interface(s)
    > 3 FastEthernet/IEEE 802.3 interface(s)
    > 4 Serial network interface(s)
    > 1 ATM network interface(s)
    > 125K bytes of non-volatile configuration memory.
    > 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
    > 8192K bytes of Flash internal SIMM (Sector size 256K).
    > No slave installed in slot 3. --- info from show version
    >
    > show microcode: -
    > Microcode bundled in system
    >
    > Card Microcode Target Hardware Description
    > Type Version Version
    > ---- --------- --------------- -----------
    > EIP 20.3 1.x EIP version 20.3
    > FIP 20.1 2.x FIP version 20.1
    > TRIP 20.1 1.x TRIP version 20.1
    > AIP 20.16 1.x AIP version 20.16
    > FSIP 20.9 1.x FSIP version 20.9
    > HIP 20.1 1.x HIP version 20.1
    > MIP 22.2 1.x MIP version 22.2
    > FEIP 20.6 2.x FEIP version 20.6
    > VIP 22.20 2.x VIP version 22.20
    > VIP2 22.20 2.x VIP2 version 22.20
    > RSP2 20.0 1.x RSP2 version 20.0
    > POSI 20.0 2.x (null) version 20.0
    >
    > Microcode flash default images
    >
    > Card Microcode
    > Type Version device:filename
    > ---- --------- -------------------
    > CIP 22-30 slot0:cip22-30 - Not present
    >
    >
     
    Woon, Jul 14, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. SingSong

    Cisco 7507 Boot Messages

    SingSong, Dec 6, 2003, in forum: Cisco
    Replies:
    0
    Views:
    1,061
    SingSong
    Dec 6, 2003
  2. scarri

    Cisco 7507 VIP4

    scarri, May 6, 2004, in forum: Cisco
    Replies:
    0
    Views:
    512
    scarri
    May 6, 2004
  3. amir

    nat-pt on cisco 7507

    amir, Jul 13, 2004, in forum: Cisco
    Replies:
    0
    Views:
    650
  4. Ray Van Dolson

    Trying to change ARP entry on Cisco 7507

    Ray Van Dolson, Dec 28, 2004, in forum: Cisco
    Replies:
    0
    Views:
    1,295
    Ray Van Dolson
    Dec 28, 2004
  5. Replies:
    0
    Views:
    444
Loading...

Share This Page