Re: Trouble with Cisco 804 password recovery

Discussion in 'Cisco' started by Kevin Pierce, Jul 23, 2003.

  1. Kevin Pierce

    Kevin Pierce Guest

    Solved.

    At the boot#> prompt, I found another file to boot from (one without CRC
    errors). This let me go through the recovery process.

    Kevin

    "Kevin Pierce" <> wrote in message
    news:...
    > Trouble with Cisco 804 password recovery.
    >
    > No way to track down old passwords; need to start fresh.
    >
    > Followed Cisco password recovery procedure with terminal break and set
    > ios-conf=142.
    >
    > But at boot#>, when I type "boot," I get this error:
    >
    > Booting "800.bin"...
    > boot: failed, "CRC error"
    >
    > If I let it boot from powerup, all is well, with the following data.
    >
    > Any help is appreciated.
    >
    > Kevin Pierce
    >
    > <<
    >
    > TinyROM version 1.2(2)
    > 16:22 08/02/99
    > Copyright (c) 1998-1999 by cisco Systems, Inc.
    > All rights reserved.
    >
    > POST ......... OK. 12MB DRAM, 12MB Flash.
    >
    >
    > Booting "800.bin" ...,
    > Restricted Rights Legend
    >
    > Use, duplication, or disclosure by the Government is
    > subject to restrictions as set forth in subparagraph
    > (c) of the Commercial Computer Software - Restricted
    > Rights clause at FAR sec. 52.227-19 and subparagraph
    > (c) (1) (ii) of the Rights in Technical Data and Computer
    > Software clause at DFARS sec. 252.227-7013.
    >
    > cisco Systems, Inc.
    > 170 West Tasman Drive
    > San Jose, California 95134-1706
    >
    >
    >
    > Cisco Internetwork Operating System Software
    > IOS (tm) C800 Software (C800-NSY6-MW), Version 12.0(5)T, RELEASE SOFTWARE
    > (fc1)
    > Copyright (c) 1986-1999 by cisco Systems, Inc.
    > Compiled Fri 23-Jul-99 02:52 by kpma
    > Image text-base: 0x000E9000, data-base: 0x006DE000
    >
    > Cisco C804 (MPC860) processor (revision 1) with 51996K bytes of virtual
    > memory.
    > Processor board ID JAD04250I4F
    > CPU part number 33
    > X.25 software, Version 3.0.0.
    > Bridging software.
    > Basic Rate ISDN software, Version 1.1.
    > 1 Ethernet/IEEE 802.3 interface(s)
    > 1 ISDN Basic Rate interface(s)
    > 12M bytes of physical memory (DRAM)
    > 8K bytes of non-volatile configuration memory
    > 12M bytes of flash on board (8M from flash card)
    >
    > %no route to 34261835, nyc076-cit-1 won't be announced until route is
    > learned
    >
    >
    > Press RETURN to get started!
    >
    >
    > 00:00:22: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
    > 00:00:23: %SYS-5-CONFIG: Configured from by
    > 00:00:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,

    changed
    > state to up
    > 00:00:25: %LINK-3-UPDOWN: Interface BRI0, changed state to up
    > 00:00:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
    > state to down
    > 00:00:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed
    > state to down
    > 00:00:27: %SYS-5-CONFIG: Configured from by
    > 00:00:27: %SYS-5
    > friedman804>-CONFIG_I: Configured from memory by console
    > 00:00:27: %SYS-5-RESTART: System restarted --
    > Cisco Internetwork Operating System Software
    > IOS (tm) C800 Software (C800-NSY6-MW), Version 12.0(5)T, RELEASE SOFTWARE
    > (fc1)
    > Copyright (c) 1986-1999 by cisco Systems, Inc.
    > Compiled Fri 23-Jul-99 02:52 by kpma
    > 00:00:27: %IPX-6-NOVACCESSLOG: 901 deny rip rip 34260141.0002.16f2.076b

    rip
    > 34260141.ffff.ffff.ffff 1 pkt
    > friedman804>
    >
    >
    > ---
    > Outgoing mail is certified Virus Free.
    > Checked by AVG anti-virus system (http://www.grisoft.com).
    > Version: 6.0.500 / Virus Database: 298 - Release Date: 7/10/2003
    >
    >



    ---
    Outgoing mail is certified Virus Free.
    Checked by AVG anti-virus system (http://www.grisoft.com).
    Version: 6.0.500 / Virus Database: 298 - Release Date: 7/10/2003
    Kevin Pierce, Jul 23, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. RC
    Replies:
    1
    Views:
    1,978
    Bob Willey
    Jul 23, 2003
  2. JShepherd
    Replies:
    0
    Views:
    612
    JShepherd
    Jul 22, 2003
  3. Bob Willey
    Replies:
    0
    Views:
    1,395
    Bob Willey
    Jul 25, 2003
  4. Digital Image Recovery
    Replies:
    1
    Views:
    1,261
  5. Digital Image Recovery

    Digital Image Recovery and Memory Stick Recovery; Recovery of Lost Photos

    Digital Image Recovery, Sep 10, 2004, in forum: Digital Photography
    Replies:
    0
    Views:
    1,109
    Digital Image Recovery
    Sep 10, 2004
Loading...

Share This Page