Re: OID to detect the line protocol Cisco

Discussion in 'Cisco' started by Erik Tamminga, Jul 14, 2003.

  1. Hi,

    It's the ifOperStatus of the MIB2 interface table.
    1.3.6.1.2.1.2.2.1.8.<ifIndex>

    Erik

    "Oliver Schlosser" <> wrote in message
    news:berhpl$te3$00$-online.com...
    > Hall all,
    >
    > i would like to get the line protokoll status from an Cisco interface
    > (serial 0/0)
    >
    > Serial0/0 is up <- Admin status , line protocol is up <- protocol
    > status
    > Hardware is PowerQUICC Serial
    > Description: Standleitung nach Duesseldorf
    > Internet address is 172.26.50.1/30
    > MTU 1500 bytes, BW 1664 Kbit, DLY 20000 usec,
    > reliability 255/255, txload 81/255, rxload 81/255
    > Encapsulation HDLC, loopback not set
    > Keepalive set (10 sec)
    > Last input 00:00:00, output 00:00:00, output hang never
    > Last clearing of "show interface" counters never
    > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 109
    > Queueing strategy: weighted fair
    >
    > Does anyone knows the OID for the protocol status field ?
    >
    > best regards
    >
    > oliver
    >
    >
    Erik Tamminga, Jul 14, 2003
    #1
    1. Advertising

  2. Hello Erik,

    it is not, that's my problem. I think it is in the private mib bit I can't
    find it.

    best regards

    Oliver

    "Erik Tamminga" <> schrieb im Newsbeitrag
    news:3f129073$0$28892$...
    > Hi,
    >
    > It's the ifOperStatus of the MIB2 interface table.
    > 1.3.6.1.2.1.2.2.1.8.<ifIndex>
    >
    > Erik
    >
    > "Oliver Schlosser" <> wrote in message
    > news:berhpl$te3$00$-online.com...
    > > Hall all,
    > >
    > > i would like to get the line protokoll status from an Cisco interface
    > > (serial 0/0)
    > >
    > > Serial0/0 is up <- Admin status , line protocol is up <- protocol
    > > status
    > > Hardware is PowerQUICC Serial
    > > Description: Standleitung nach Duesseldorf
    > > Internet address is 172.26.50.1/30
    > > MTU 1500 bytes, BW 1664 Kbit, DLY 20000 usec,
    > > reliability 255/255, txload 81/255, rxload 81/255
    > > Encapsulation HDLC, loopback not set
    > > Keepalive set (10 sec)
    > > Last input 00:00:00, output 00:00:00, output hang never
    > > Last clearing of "show interface" counters never
    > > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops:

    109
    > > Queueing strategy: weighted fair
    > >
    > > Does anyone knows the OID for the protocol status field ?
    > >
    > > best regards
    > >
    > > oliver
    > >
    > >

    >
    >
    Oliver Schlosser, Jul 14, 2003
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. news.comcast.giganews.com

    Protocol Chart - Learn how to use a Protocol Analyzer

    news.comcast.giganews.com, Aug 21, 2004, in forum: Wireless Networking
    Replies:
    0
    Views:
    2,814
    news.comcast.giganews.com
    Aug 21, 2004
  2. Rich Blum
    Replies:
    0
    Views:
    1,491
    Rich Blum
    Jul 14, 2003
  3. Replies:
    6
    Views:
    3,257
  4. Replies:
    0
    Views:
    607
  5. Replies:
    1
    Views:
    1,096
    Aaron Leonard
    Jun 22, 2007
Loading...

Share This Page