Re: ISDN BRI dial-up access!

Discussion in 'Cisco' started by thrill5, Jul 20, 2006.

  1. thrill5

    thrill5 Guest

    Your call is call is coming as a voice call, and the router does not know
    what to do it, so it throws out a busy. ISDN is not like analog where you
    call the number from your desk and see if you can hear modem tones. ISDN
    data calls, come in as DATA.

    Scott

    "NeoN" <> wrote in message
    news:...
    > Good day!
    > I have a problem. i`ll try to do a phone call but the line is busy!
    >
    > Log
    >
    > *Mar 1 10:43:09.692: ISDN BR0/0 EVENT:
    > service_queue_from_physical_layer: Recvd L1 prim 1 state is 3
    > *Mar 1 10:43:09.692: ISDN BR0/0 EVENT: isdn_sw_cstate: State = 4, Old
    > State = 4
    > *Mar 1 10:43:09.692: ISDN BR0/0 EVENT:
    > service_queue_from_physical_layer: Recvd L1 prim 6 state is 1
    > *Mar 1 10:43:09.692: ISDN BR0/0 EVENTd:
    > service_queue_from_physical_layer: Recvd MPH_EI2_IND from L1
    > *Mar 1 10:43:09.696: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
    > data 0x0001
    > *Mar 1 10:43:09.700: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
    >
    > L2: sapi 63 tei 127 ces 0 ev 0x650
    > *Mar 1 10:43:09.732: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
    > data 0x0F00560283
    > *Mar 1 10:43:09.736: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
    >
    > L2: sapi 63 tei 127 ces 0 ev 0x3
    > *Mar 1 10:43:09.760: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0,
    > TEI 65 changed to up
    > *Mar 1 10:43:09.828: ISDN BR0/0 Q931: RX <- SETUP pd = 8 callref =
    > 0x0F
    > Sending Complete
    > Bearer Capability i = 0x8090A3
    > Standard = CCITT
    > Transer Capability = Speech
    > Transfer Mode = Circuit
    > Transfer Rate = 64 kbit/s
    > Channel ID i = 0x8A
    > Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band
    > info
    > Called Party Number i = 0x81, '72491'
    > Plan:ISDN, Type:Unknown
    > *Mar 1 10:43:09.828: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
    > data 0x08010F05A104038090A318018A1E0282
    > *Mar 1 10:43:09.828: 817006813732343931
    > *Mar 1 10:43:09.828: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
    >
    > L2: sapi 0 tei 127 ces 0 ev 0x3
    > *Mar 1 10:43:09.832: ISDN BR0/0 EVENT: process_rxstate: ces/callid
    > 1/0x2 calltype 2 HOST_INCOMING_CALL
    > *Mar 1 10:43:09.832: ISDN BR0/0 EVENTd: isdn_get_guid: Got Guid BR0/0
    > *Mar 1 10:43:09.832: ISDN BR0/0 EVENT: host_incoming_call: call_id
    > 0x0002, Guid = BR0/0
    > *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_incoming_call:
    > call_id=0x2
    > *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
    > isdn_info=2195596752l, call_id=0x2 ANSWER
    > *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
    > calltracker disabled
    > *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: host_incoming_call: (non-POTS)
    > VOICE call
    > *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
    > isdn_info=2195622208l, call_id=0x2 ANSWER
    > *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: (1)
    > call_type is VOICE
    > *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call:
    > voice_answer_data = FALSE call type is VOICE ALAW
    > *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: Received a
    > VOICE call from <unknown> on B2 at 64 Kb/s
    > *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: Accepting
    > call call id 0x2
    > *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: isdn_fromdialer: RM returned
    > call_type 1 resource type 0 response 2
    > *Mar 1 10:43:09.844: ISDN BR0/0 EVENT: UserIdle: callid 0x2 received
    > ACCEPT_CALL (0x13)
    > *Mar 1 10:43:09.844: ISDN BR0/0 **ERROR**: accept_incoming_csm_call:
    > modem problem Bearer capability not available(0x3A): b channel 1, call
    > id 0x2
    > *Mar 1 10:43:09.844: ISDN BR0/0 EVENTd: process_disconnect: call id
    > 0x2, call type is VOICE, b_idb 0x82DE6F74, ces 1, cause Bearer
    > capability not available(0x3A)
    > *Mar 1 10:43:09.848: ISDN BR0/0 EVENTd: calltrkr_call_disconnected:
    > isdn_info=0x82DE8940, call_id=0x2
    > *Mar 1 10:43:09.848: ISDN BR0/0 EVENTd: process_disconnect: Raw
    > Release Message 0x0500010002040802FFBA080280BA
    > *Mar 1 10:43:09.852: ISDN BR0/0 Q931: TX -> CALL_PROC pd = 8 callref
    > = 0x8F
    > Channel ID i = 0x8A
    > *Mar 1 10:43:09.876: ISDN BR0/0 Q931: TX -> DISCONNECT pd = 8 callref
    > = 0x8F
    > Cause i = 0x80BA - Bearer capability not available
    > *Mar 1 10:43:09.913: ISDN BR0/0 Q931: RX <- STATUS pd = 8 callref =
    > 0x0F
    > Cause i = 0x8290 - Normal call clearing
    > Call State i = 0x06
    > *Mar 1 10:43:09.913: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
    > data 0x08010F7D08028290140106
    > *Mar 1 10:43:09.917: ISDN BR0/0 Q931: TX -> RELEASE pd = 8 callref =
    > 0x8F
    > Cause i = 0x80E5 - Message not compatible with call state
    > *Mar 1 10:43:09.953: ISDN BR0/0 Q931: RX <- RELEASE_COMP pd = 8
    > callref = 0x0F
    > Cause i = 0x8290 - Normal call clearing
    > *Mar 1 10:43:09.953: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
    > data 0x08010F5A08028290
    > *Mar 1 10:43:09.957: ISDN EVENTd: cc_clear_free_list freed 0x81AD40F8
    >
    > *Mar 1 10:43:09.957: ISDN BR0/0 EVENT: process_rxstate: ces/callid
    > 1/0x2 calltype 2 HOST_DISCONNECT_ACK
    > *Mar 1 10:43:09.957: ISDN BR0/0 EVENTd: process_rxstate: cause=0x10
    > (16), cause_present=1
    > *Mar 1 10:43:09.957: ISDN BR0/0 EVENTd: calltrkr_call_cleared:
    > isdn_info=0x82DE25D0, call_id=0x2
    > *Mar 1 10:43:09.961: ISDN BR0/0 EVENTd: calltrkr_call_cleared:
    > isdn_info=0x82DE8940, call_id=0x2
    > *Mar 1 10:43:09.961: ISDN BR0/0 EVENTd: host_disconnect_ack: call type
    > is VOICE
    >
    >
    > Config
    > interface BRI0/0
    > description TO_02
    > no ip address
    > service-policy output VOICE-POLICY
    > encapsulation ppp
    > no ip mroute-cache
    > dialer rotary-group 1
    > dialer-group 1
    > isdn switch-type basic-net3
    > no cdp enable
    > !
    > interface Dialer1
    > description connected 02
    > ip address 10.23.255.90 255.255.255.252
    > service-policy output VOICE-POLICY
    > encapsulation ppp
    > no ip route-cache cef
    > no ip split-horizon
    > dialer in-band
    > dialer hold-queue 10
    > dialer-group 1
    > no cdp enable
    > ppp authentication chap
    > ppp multilink
    > ppp multilink fragment delay 10
    > ppp multilink interleave
    >
    thrill5, Jul 20, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Wayne

    Help with ISDN PRI & BRI

    Wayne, Jul 11, 2003, in forum: Cisco
    Replies:
    3
    Views:
    4,961
    Michael Hatzis
    Jul 12, 2003
  2. Rainer
    Replies:
    4
    Views:
    1,054
    Rainer
    Jul 21, 2003
  3. Aaron Leonard
    Replies:
    3
    Views:
    505
    Hansang Bae
    Oct 16, 2003
  4. Stephan Cohen
    Replies:
    0
    Views:
    577
    Stephan Cohen
    Oct 16, 2003
  5. sync
    Replies:
    0
    Views:
    554
Loading...

Share This Page