Re: IP routing on source address

Discussion in 'Cisco' started by Knokmans, Nov 15, 2004.

  1. Knokmans

    Knokmans Guest

    Thanks

    I have some keywords to start
    Must be able to manage this now !

    Knokmans

    --


    ---------------------------------------------------------------------
    "Are you still wasting your time with spam?...
    There is a solution!"

    Protected by GIANT Company's Spam Inspector
    The most powerful anti-spam software available.
    http://mail.spaminspector.com


    "@ndree" <> wrote in message
    news:...
    > Hi,
    >
    > .-- My secret spy satellite informs me that at 12-11-2004 14:39 Knokmans
    > wrote:
    >> On a cisco router (2600 series) i want to implement IP routing using the
    >> source address
    >> fe0: 192.168.1.254/24
    >> fe1: 192.168.2.254/24
    >> fe2: 192.168.3.254/24
    >>
    >> At this moment, all traffic with source 192.168.1.0 is routed to
    >> 192.168.2.254 (fe1)
    >> What i want in the future is routing like this:
    >> source 192.168.1.0/25 (fe0, 1st half) is routed to 192.168.2.254
    >> (fe1)
    >> source 198.168.1.128/25 (fe0, 2nd half) is routed to 192.168.3.254
    >> (fe2)
    >>
    >> Can anyone help me giving a (piece of) example of configuration code
    >> or else a link to a (cisco)webpage where this is explained well is also
    >> OK.

    >
    > Something like this:
    >
    > access-list 1 permit 192.168.1.0 0.0.0.128
    >
    > !
    > interface serial fe0
    > ip policy route-map out-fe1
    > !
    > route-map policy-map
    > match ip address 1
    > set interface fe1
    >
    > or instead of set interface fe1 you can use
    > set ip next-hop $nexthop
    >
    > You can also try searching at cisco.com
    > search for policy routing
    >
    >
    > Regards Andree
     
    Knokmans, Nov 15, 2004
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Author Tarun Tyagi
    Replies:
    0
    Views:
    762
    Author Tarun Tyagi
    Dec 29, 2004
  2. Andrew Albert
    Replies:
    1
    Views:
    4,004
    Rod Dorman
    Feb 8, 2005
  3. Replies:
    4
    Views:
    1,095
  4. Lawrence D'Oliveiro

    Open-Source Good, Closed-Source Bad

    Lawrence D'Oliveiro, Oct 16, 2005, in forum: NZ Computing
    Replies:
    1
    Views:
    507
    Gordon
    Oct 16, 2005
  5. Lawrence D'Oliveiro

    Closed-Source vs Open-Source Drivers

    Lawrence D'Oliveiro, May 4, 2009, in forum: NZ Computing
    Replies:
    2
    Views:
    545
    Lawrence D'Oliveiro
    May 5, 2009
Loading...

Share This Page