Question: AMD Sempron 2800 & bootable restore cd/dvd

Discussion in 'Computer Information' started by Muhammad Khan, Mar 4, 2005.

  1. I am building a computer for my friend. I went to Fry's and got that deal
    on AMD Sempron 2800 with PcChip motherboard. Installed windows XP SP2,
    every thing is fine. However when I go to device manger, windows is reading
    processor speed at 1.2GHZ. I went to AMD site and found few article online
    about the conversion of AMD sempron to Intel speed. To my understanding
    Sempron 2800 should be close to 2.2GH. I check the jumper setting on the
    motherboard seems correct. In BIOS under CPU PnP setup, I left it disabled
    as per Motherboard manual for detecting the processor speed automatically.
    My question is that is Sempron 2800 should be showing as 1.2 GHZ? or I need
    to change BIOS setting.
    Another question is that I want to make a system restore cd, so if the
    system crashed they can reboot the computer and restore it. I have Norton
    ghost 3.0 and made backup and able to restore the system from the backup
    cd/dvd, the only problem is that recovery wizard is not very user
    friendly(for e.g., no mouse support).
    Anyone has similar motherboard and processor or have any knowledge please
    help.
    Thanks,
    Muhammad
     
    Muhammad Khan, Mar 4, 2005
    #1
    1. Advertising

  2. Muhammad Khan

    Wizard Guest

    shut the **** up mahmoot.

    "Muhammad Khan" <> wrote in message
    news:Fc2Wd.5365$
    > I am building a computer for my friend. I went to Fry's and got that
    > deal on AMD Sempron 2800 with PcChip motherboard. Installed windows
    > XP SP2, every thing is fine. However when I go to device manger,
    > windows is reading processor speed at 1.2GHZ. I went to AMD site and
    > found few article online about the conversion of AMD sempron to Intel
    > speed. To my understanding Sempron 2800 should be close to 2.2GH. I
    > check the jumper setting on the motherboard seems correct. In BIOS
    > under CPU PnP setup, I left it disabled as per Motherboard manual for
    > detecting the processor speed automatically. My question is that is
    > Sempron 2800 should be showing as 1.2 GHZ? or I need to change BIOS
    > setting.
    > Another question is that I want to make a system restore cd, so if the
    > system crashed they can reboot the computer and restore it. I have
    > Norton ghost 3.0 and made backup and able to restore the system from
    > the backup cd/dvd, the only problem is that recovery wizard is not
    > very user friendly(for e.g., no mouse support).
    > Anyone has similar motherboard and processor or have any knowledge
    > please help.
    > Thanks,
    > Muhammad
     
    Wizard, Mar 5, 2005
    #2
    1. Advertising

  3. Muhammad Khan

    Wizard Guest

    Muhammad Khan , wrote in message
    c2Wd.5365$:

    > Muhammad


    I spit on you a thousand times with camel shit rising from your ears and
    nose.

    May your mothers arms fall off and your camel **** your father after your
    sister.

    Praise be to Allan!!
     
    Wizard, Mar 5, 2005
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Silverstrand

    AMD Sempron now 64-bit

    Silverstrand, Jul 9, 2005, in forum: Front Page News
    Replies:
    8
    Views:
    1,048
    unholy
    Jul 14, 2005
  2. Silverstrand
    Replies:
    0
    Views:
    1,329
    Silverstrand
    Jul 25, 2005
  3. Dalgibbard

    AMD Sempron vs AMD Athlon

    Dalgibbard, Sep 16, 2004, in forum: Computer Support
    Replies:
    2
    Views:
    830
    Shel-hed
    Sep 16, 2004
  4. Wizard
    Replies:
    0
    Views:
    3,586
    Wizard
    Mar 11, 2005
  5. BEV
    Replies:
    3
    Views:
    499
    Plato
    Feb 11, 2006
Loading...

Share This Page