Protocol Translation

Discussion in 'Cisco' started by Gerhard Lein, Nov 19, 2004.

  1. Gerhard Lein

    Gerhard Lein Guest

    Hi,

    on a 3600 router i try to connect over the serial1/0 line, which connected to a
    x.25 switch, to an tcp-host on the ethernet.
    config:
    XOTRouter#sh run
    Building configuration...

    Current configuration : 3392 bytes
    !
    version 12.2
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    !
    x25 routing
    interface Ethernet0/0
    ip address 172.28.50.200 255.255.255.0
    no ip route-cache
    no ip mroute-cache
    half-duplex
    no cdp enable
    !
    interface TokenRing0/0
    no ip address
    shutdown
    ring-speed 16
    no cdp enable
    !
    interface Serial1/0
    description ibm-pos terminals (710021 17)
    bandwidth 128
    no ip address
    encapsulation x25 dce
    no ip mroute-cache
    x25 address 73331010
    x25 nvc 8
    serial restart_delay 0
    no cdp enable
    translate x25 73331010 tcp 172.28.50.200 port 8888
    translate x25 71008111 tcp 172.28.50.10 port 9999 stream

    if i set a call from the x25 switch the debug message look like this
    XOTRouter#
    *Mar 1 01:47:11.998 MEZ: Serial1/0: X.25 I R1 Call (27) 8 lci 9
    *Mar 1 01:47:11.998 MEZ: From (8): 71008108 To (8): 73331010
    *Mar 1 01:47:12.002 MEZ: Facilities: (10)
    *Mar 1 01:47:12.002 MEZ: Behavior flags:
    *Mar 1 01:47:12.002 MEZ: no Reverse charging, no Fast select
    *Mar 1 01:47:12.002 MEZ: Throughputs: 9600 9600
    *Mar 1 01:47:12.002 MEZ: Packet sizes: 128 128
    *Mar 1 01:47:12.002 MEZ: Window sizes: 3 3
    *Mar 1 01:47:12.002 MEZ: Call User Data (4): 0x01000000 (pad)
    *Mar 1 01:47:12.006 MEZ: Serial1/0: X.25 O R1 Clear (5) 8 lci 9
    *Mar 1 01:47:12.006 MEZ: Cause 13, Diag 116 (Not obtainable/International lin
    k busy)
    *Mar 1 01:47:12.022 MEZ: Serial1/0: X.25 I R1 Clear Confirm (3) 8 lci 9
    *Mar 1 01:47:19.850 MEZ: Serial1/0: X.25 I R1 Call (27) 8 lci 9
    *Mar 1 01:47:19.854 MEZ: From (8): 71008108 To (8): 71008111
    *Mar 1 01:47:19.854 MEZ: Facilities: (10)
    *Mar 1 01:47:19.854 MEZ: Behavior flags:
    *Mar 1 01:47:19.854 MEZ: no Reverse charging, no Fast select
    *Mar 1 01:47:19.854 MEZ: Throughputs: 9600 9600
    *Mar 1 01:47:19.854 MEZ: Packet sizes: 128 128
    *Mar 1 01:47:19.854 MEZ: Window sizes: 3 3
    *Mar 1 01:47:19.854 MEZ: Call User Data (4): 0x01000000 (pad)
    *Mar 1 01:47:19.858 MEZ: Serial1/0: X.25 O R1 Clear (5) 8 lci 9
    *Mar 1 01:47:19.858 MEZ: Cause 13, Diag 116 (Not obtainable/International lin
    k busy)
    *Mar 1 01:47:19.866 MEZ: Serial1/0: X.25 I R1 Clear Confirm (3) 8 lci 9


    any idea what ist wrong ??

    regars
    gerhard
    Gerhard Lein, Nov 19, 2004
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Sascha E. Pollok

    X.25 to TCP protocol translation

    Sascha E. Pollok, Dec 1, 2003, in forum: Cisco
    Replies:
    4
    Views:
    3,113
    Julio Arruda
    Dec 2, 2003
  2. Replies:
    2
    Views:
    14,557
    milkboy33
    Apr 17, 2012
  3. deen0
    Replies:
    0
    Views:
    655
    deen0
    Feb 14, 2008
  4. Replies:
    16
    Views:
    19,391
    javijavi
    May 5, 2009
  5. M
    Replies:
    3
    Views:
    4,391
    Matthew Melbourne
    Mar 5, 2009
Loading...

Share This Page