Problem with PRI Line

Discussion in 'Cisco' started by Matt, Jul 12, 2004.

  1. Matt

    Matt Guest

    Hi,
    I just ported a PRI line over that was working fine on an as5300 as a
    data service (modem dials up).

    I am now trying to use it for faxing on another as5300. When I call
    the number I get a fast busy signal and see this:

    00:27:08: ISDN Se0:23: RX <- INFOc sapi = 0 tei = 0 ns = 32 nr = 32
    i =
    0x080200110504038090A21803A983816C0C21833537303332333231363670088036303133343733
    00:27:08: ISDN Se0:23: TX -> RRr sapi = 0 tei = 0 nr = 33
    00:27:08: ISDN Se0:23: Incoming call id = 0x51, dsl 0
    00:27:08: ISDN Se0:23: received CALL_INCOMING call_id 0x51
    00:27:08: ISDN Se0:23: CALL_INCOMING: call type is VOICE, bchan = 0
    00:27:08: ISDN Se0:23: Event: Received a call id 0x51 with a bad
    bearercap from 5703232166 on B1
    00:27:08: ISDN Se0:23: CCPRI_ReleaseCall(): bchan 1, call id 0x51, call
    type VOICE
    00:27:08: ISDN Se0:23: received CALL_CLEARED call_id 0x51


    Any ideas?

    LINE CONFIG:
    isdn switch-type primary-ni
    isdn voice-call-failure 0
    !
    !
    controller T1 0
    framing esf
    clock source line primary
    linecode b8zs
    pri-group timeslots 1-24
    description INCOMING FAX PRI
    Matt, Jul 12, 2004
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. jamal
    Replies:
    1
    Views:
    831
  2. Reza
    Replies:
    0
    Views:
    5,615
  3. norsyam
    Replies:
    6
    Views:
    3,152
    Vincent C Jones
    Sep 28, 2004
  4. Carlo
    Replies:
    0
    Views:
    479
    Carlo
    Feb 14, 2006
  5. feras

    DID #- PRI line

    feras, Jun 28, 2004, in forum: VOIP
    Replies:
    4
    Views:
    3,189
    Guest
    Jul 7, 2004
Loading...

Share This Page