Problem with 2611XM

Discussion in 'Cisco' started by Steven, May 11, 2005.

  1. Steven

    Steven Guest

    If I upgrade the DRAM in a 2611XM router to greater than 64MB it no longer
    recognizes the fast0/1 interface. On boot up and in the logs it shows
    %AMDP2_FE-1-INITFAIL: CSR0=0x0000

    It works fine with 1x 64MB DRAM DIMM or 2 x 32MB DRAM DIMMS - but not with
    2x 64MB DRAM DIMMS or 1x 64MB DRAM DIMM and 1 x 32MB DRAM DIMMS

    Output for Show Ver:

    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Mon 25-Apr-05 21:16 by ssearch
    Image text-base: 0x80008098, data-base: 0x80CD3620

    ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
    ROM: C2600 Software (C2600-I-M), Version 12.3(13a), RELEASE SOFTWARE (fc2)

    Router uptime is 7 minutes
    System returned to ROM by power-on
    System image file is "flash:c2600-i-mz.123-13a.bin"

    cisco 2611XM (MPC860P) processor (revision 0x100) with 126976K/4096K bytes
    of me
    mory.
    Processor board ID JPE073510PD (4181114897)
    M860 processor: part number 5, mask 1
    Bridging software.
    X.25 software, Version 3.0.0.
    32K bytes of non-volatile configuration memory.
    32768K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    Router#sh c2600

    PLD Status:
    PLD version information not available.

    DIMM Slot 0:
    DIMM Type : Dual-bank
    DIMM Size : 64MBytes

    DIMM Slot 1:
    DIMM Type : Dual-bank
    DIMM Size : 64MBytes

    Anyone seen this one before?

    Regards,

    Steve.
     
    Steven, May 11, 2005
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Eric Rees

    Re: Bridging on CISCO 2611XM

    Eric Rees, Jul 18, 2003, in forum: Cisco
    Replies:
    0
    Views:
    502
    Eric Rees
    Jul 18, 2003
  2. Stuart

    2611XM basic routing problem

    Stuart, Jan 23, 2004, in forum: Cisco
    Replies:
    6
    Views:
    716
    Stuart
    Jan 24, 2004
  3. JCVD
    Replies:
    1
    Views:
    460
    Martin Gallagher
    Feb 13, 2004
  4. news
    Replies:
    9
    Views:
    3,362
    Steinar Haug
    Mar 4, 2004
  5. dritix

    How to install NM-1E on 2611XM

    dritix, Oct 16, 2004, in forum: Cisco
    Replies:
    5
    Views:
    993
    dritix
    Oct 18, 2004
Loading...

Share This Page