pix525

Discussion in 'Cisco' started by domini, Oct 18, 2004.

  1. domini

    domini Guest

    I have strange problem - cisco pix firewall 525 has in configuration:

    name 10.0.0.1 server-out
    name 192.168.0.1 server-in
    static(outside,inside) server-out server-in netmask 255.255.255.255 0 0

    and... I don't know why - often line:
    static(outside,in.......
    just desppear!

    Correctly: there are two pix 525, that are working in failover.

    Can someone help me?

    Domini
    domini, Oct 18, 2004
    #1
    1. Advertising

  2. domini

    PES Guest

    Outside of something that is going on with fail over, the static statement
    is
    static(inside,outside) server-out server-in netmask 255.255.255.255 0 0

    Your config is
    static(outside,inside) server-out server-in netmask 255.255.255.255 0 0


    "domini" <> wrote in message
    news:cl04ti$dca$...
    >I have strange problem - cisco pix firewall 525 has in configuration:
    >
    > name 10.0.0.1 server-out
    > name 192.168.0.1 server-in
    > static(outside,inside) server-out server-in netmask 255.255.255.255 0 0
    >
    > and... I don't know why - often line:
    > static(outside,in.......
    > just desppear!
    >
    > Correctly: there are two pix 525, that are working in failover.
    >
    > Can someone help me?
    >
    > Domini
    >
    >
    PES, Oct 18, 2004
    #2
    1. Advertising

  3. domini

    domini Guest

    Sorry, I did mistake. My config is:
    static (inside,outside) server-out server-in netmask 255.255.255.255 0 0
    That is ok.
    What can be the reason why this line desappear?

    domini

    U¿ytkownik "PES" <NO*SPAMpestewartREMOVE**SUCKS>
    napisa³ w wiadomo¶ci news:...
    > Outside of something that is going on with fail over, the static statement
    > is
    > static(inside,outside) server-out server-in netmask 255.255.255.255 0 0
    >
    > Your config is
    > static(outside,inside) server-out server-in netmask 255.255.255.255 0 0
    >
    >
    > "domini" <> wrote in message
    > news:cl04ti$dca$...
    > >I have strange problem - cisco pix firewall 525 has in configuration:
    > >
    > > name 10.0.0.1 server-out
    > > name 192.168.0.1 server-in
    > > static(outside,inside) server-out server-in netmask 255.255.255.255 0 0
    > >
    > > and... I don't know why - often line:
    > > static(outside,in.......
    > > just desppear!
    > >
    > > Correctly: there are two pix 525, that are working in failover.
    > >
    > > Can someone help me?
    > >
    > > Domini
    > >
    > >

    >
    >
    domini, Oct 18, 2004
    #3
  4. domini wrote:
    > Sorry, I did mistake. My config is:
    > static (inside,outside) server-out server-in netmask 255.255.255.255 0 0
    > That is ok.
    > What can be the reason why this line desappear?


    If it's failover scenario, You should make changes only on active unit
    (not standby one), and after configuring the active one, You should
    execute:

    write standby

    ....to synchronize both configurations. If You have any doubts about the
    failover configuration, please read the configuration guide chapter about
    failover:

    http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/config/failover.pdf

    --
    this space was intentionally left blank | £ukasz Bromirski
    you can insert your favourite quote here | lukasz:bromirski,net
    =?ISO-8859-2?Q?=A3ukasz_Bromirski?=, Oct 18, 2004
    #4
  5. domini

    PES Guest

    I'm not sure. On the basics, make sure you are doing a write mem after
    adding the command and a write standby to get the config to the standby
    unit. Beyond that, I've never seen this. However, I don't have a lot of
    experience with the PIX in a failover environment.

    "domini" <> wrote in message
    news:cl0734$ngs$...
    > Sorry, I did mistake. My config is:
    > static (inside,outside) server-out server-in netmask 255.255.255.255 0 0
    > That is ok.
    > What can be the reason why this line desappear?
    >
    > domini
    >
    > U¿ytkownik "PES" <NO*SPAMpestewartREMOVE**SUCKS>
    > napisa³ w wiadomo¶ci news:...
    >> Outside of something that is going on with fail over, the static
    >> statement
    >> is
    >> static(inside,outside) server-out server-in netmask 255.255.255.255 0 0
    >>
    >> Your config is
    >> static(outside,inside) server-out server-in netmask 255.255.255.255 0 0
    >>
    >>
    >> "domini" <> wrote in message
    >> news:cl04ti$dca$...
    >> >I have strange problem - cisco pix firewall 525 has in configuration:
    >> >
    >> > name 10.0.0.1 server-out
    >> > name 192.168.0.1 server-in
    >> > static(outside,inside) server-out server-in netmask 255.255.255.255 0 0
    >> >
    >> > and... I don't know why - often line:
    >> > static(outside,in.......
    >> > just desppear!
    >> >
    >> > Correctly: there are two pix 525, that are working in failover.
    >> >
    >> > Can someone help me?
    >> >
    >> > Domini
    >> >
    >> >

    >>
    >>

    >
    >
    PES, Oct 18, 2004
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. AM
    Replies:
    0
    Views:
    454
  2. iwhite
    Replies:
    3
    Views:
    915
    Walter Roberson
    Nov 15, 2005
  3. Jon Doe
    Replies:
    0
    Views:
    542
    Jon Doe
    Jun 7, 2006
  4. Jon Doe

    PIX525: Need Failover help

    Jon Doe, Aug 18, 2006, in forum: Cisco
    Replies:
    1
    Views:
    516
    Jon Doe
    Aug 19, 2006
  5. Hoffa
    Replies:
    4
    Views:
    1,042
    Hoffa
    Nov 8, 2006
Loading...

Share This Page