Pix publishing

Discussion in 'Cisco' started by Guest, Apr 5, 2004.

  1. Guest

    Guest Guest

    Yes

    "KieranK" <> wrote in message
    news:...
    > Hello,
    > Is it possible to publish two internal servers (smtp and http) to one
    > external ip address on the PIX.
    > xxx.yyy.10.20:25 -> 192.168.1.1:25
    > xxx.yyy.10.20:80 -> 192.168.1.2:80
    > I know this was possible on our old ISA Server.
    >
    > Thanks in advance
    >
    > KieranK
    Guest, Apr 5, 2004
    #1
    1. Advertising

  2. Guest

    KieranK Guest

    Hello,
    Is it possible to publish two internal servers (smtp and http) to one
    external ip address on the PIX.
    xxx.yyy.10.20:25 -> 192.168.1.1:25
    xxx.yyy.10.20:80 -> 192.168.1.2:80
    I know this was possible on our old ISA Server.

    Thanks in advance

    KieranK
    KieranK, Apr 5, 2004
    #2
    1. Advertising

  3. Guest

    jmark Guest

    Hi,
    you should use port redirection. It goes something like this:
    ! http i redirected to some internal address
    static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
    255.25.255.255
    ! telnet to a pix public address is redirected to a internal telnet server
    static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255

    hope this helps,
    jura


    "KieranK" <> wrote in message
    news:...
    > Hello,
    > Is it possible to publish two internal servers (smtp and http) to one
    > external ip address on the PIX.
    > xxx.yyy.10.20:25 -> 192.168.1.1:25
    > xxx.yyy.10.20:80 -> 192.168.1.2:80
    > I know this was possible on our old ISA Server.
    >
    > Thanks in advance
    >
    > KieranK
    jmark, Apr 5, 2004
    #3
  4. In article <c4sa2g$pnu$>, jmark <> wrote:
    :you should use port redirection. It goes something like this:
    :! http i redirected to some internal address
    :static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
    :255.25.255.255
    :! telnet to a pix public address is redirected to a internal telnet server
    :static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255

    No, that's telnet to the PIX's smtp port being redirected to an
    internal telnet server. Kind of a strange thing to do, but I guess
    it confuses spammers...


    You can't directly redirect telnet to the PIX outside address itself
    on current versions of PIX software -- telnet and one other port in the
    1700 range are reserved on the PIX outside IP.
    --
    Suppose there was a test you could take that would report whether
    you had Free Will or were Pre-Destined. Would you take the test?
    Walter Roberson, Apr 5, 2004
    #4
  5. Guest

    KieranK Guest

    Tks, but it does not quite answer my question.
    Maybe my question is not clear.

    example:

    When I connect to external address 200.200.200.1:80 I want the pix to
    reditect that to internal address 10.1.1.4:80
    When I connect the the same external address but a different port
    200.200.200.1:25 I want the pix to redirect that to internal address
    10.1.1.5:25

    One external address but redirect traffic depending on port, but not
    port redirection.

    Hope this makes sense.
    KK


    -cnrc.gc.ca (Walter Roberson) wrote in message news:<c4sb0a$jc3$>...
    > In article <c4sa2g$pnu$>, jmark <> wrote:
    > :you should use port redirection. It goes something like this:
    > :! http i redirected to some internal address
    > :static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
    > :255.25.255.255
    > :! telnet to a pix public address is redirected to a internal telnet server
    > :static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255
    >
    > No, that's telnet to the PIX's smtp port being redirected to an
    > internal telnet server. Kind of a strange thing to do, but I guess
    > it confuses spammers...
    >
    >
    > You can't directly redirect telnet to the PIX outside address itself
    > on current versions of PIX software -- telnet and one other port in the
    > 1700 range are reserved on the PIX outside IP.
    KieranK, Apr 6, 2004
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. =?Utf-8?B?TWNNYWthbg==?=

    Microsoft not publishing SP2 bluetooth API!?

    =?Utf-8?B?TWNNYWthbg==?=, Oct 10, 2004, in forum: Wireless Networking
    Replies:
    2
    Views:
    1,267
    =?Utf-8?B?R3JlZW55J3MgTWVhbmllcw==?=
    Dec 15, 2004
  2. jonnah
    Replies:
    4
    Views:
    481
    hausherrs
    May 2, 2004
  3. David
    Replies:
    3
    Views:
    3,411
    Walter Roberson
    Jun 19, 2004
  4. Robert Cunningham

    My pix selected for publishing-Scam?

    Robert Cunningham, Aug 30, 2006, in forum: Digital Photography
    Replies:
    11
    Views:
    635
    Pictures
    Sep 7, 2006
  5. RG
    Replies:
    1
    Views:
    449
    Walter Roberson
    Jun 19, 2008
Loading...

Share This Page