PIX Configuration Help...

Discussion in 'Cisco' started by ciscolio, Jun 24, 2008.

  1. ciscolio

    ciscolio

    Joined:
    May 28, 2008
    Messages:
    3
    Question about configuring a PIX. Have a PIX 515. Internal network connects to a Cisco Rtr over a NAT IP Block (192.168.x.x), then the rtr connects via 2nd Eth int to PIX over another NAT Block (10.x.x.x). There's a switch that connects to the PIX, connects the backup PIX, DMZ's, etc.

    I need to add a host on the network, onto the 10.x block. So basically plug into that switch that connects the PIX. I'm just going to give the machine an IP from the 10.x block.

    Question, looking for ideas how to config this...Basically machine needs to:
    -Accept connections to Ports 20, 21, 1433, 5900 from any host on the 192.168.x.x network.
    -Make/accept Port 1433 connections to a host sitting on our DMZ.
    -This host will need to be able to INITIATE outgoing Port 80 connections to the public internet. Other than this, no reason host will go outside the internal network.

    Ideas on configs? Add/deny statements???

    Thanks in advance!!!
    ciscolio, Jun 24, 2008
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Remco Bressers
    Replies:
    1
    Views:
    495
    Jyri Korhonen
    Nov 21, 2003
  2. Brian P Flounders

    PIX 501 configuration help: T1 with IP range

    Brian P Flounders, Jun 7, 2004, in forum: Cisco
    Replies:
    0
    Views:
    590
    Brian P Flounders
    Jun 7, 2004
  3. Dejan
    Replies:
    1
    Views:
    963
    shen@axentra.net
    Aug 17, 2005
  4. jester
    Replies:
    1
    Views:
    1,740
    Vivek
    Dec 20, 2005
  5. ward@sciinc.com
    Replies:
    0
    Views:
    773
    ward@sciinc.com
    Mar 3, 2006
Loading...

Share This Page