PIX config file

Discussion in 'Cisco' started by Tobias Korb, Jun 3, 2004.

  1. Tobias Korb

    Tobias Korb Guest

    Hello,

    I want to use my PIX 501 only for HTTP and shoutcast Stream (Port 8002) für
    Inside-> Out.
    This is my config file... I want to no, is this ok or want can/must I
    change??

    THX Tobi

    : Saved
    : Written by enable_15 at 08:33:19.459 UTC Thu Jun 3 2004
    PIX Version 6.3(3)
    interface ethernet0 100full
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password xxxxx encrypted
    passwd xxxxx encrypted
    hostname JWFW
    domain-name hks
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    access-list from-outside-coming-in permit icmp any any time-exceeded
    access-list from-outside-coming-in permit icmp any any unreachable
    access-list from-outside-coming-in deny ip any any
    access-list from-in-coming-in permit tcp any any eq 8002
    access-list from-in-coming-in permit tcp any any eq www
    access-list from-in-coming-in deny ip any any
    pager lines 24
    logging on
    logging timestamp
    logging trap warnings
    logging history warnings
    logging facility 23
    logging host inside 192.168.1.20
    mtu outside 1500
    mtu inside 1500
    ip address outside 10.48.33.5 255.255.240.0
    ip address inside 192.168.1.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm location 192.168.1.20 255.255.255.255 inside
    pdm logging informational 100
    pdm history enable
    arp timeout 14400
    global (outside) 10 interface
    nat (inside) 10 0.0.0.0 0.0.0.0 0 0
    access-group from-outside-coming-in in interface outside
    access-group from-in-coming-in in interface inside
    route outside 0.0.0.0 0.0.0.0 10.48.33.1 1
    timeout xlate 0:05:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
    1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    http 192.168.1.20 255.255.255.255 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    dhcpd address 192.168.1.30-192.168.1.40 inside
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd auto_config outside
    dhcpd enable inside
    terminal width 80
    Cryptochecksum:203d19ad5d657d09b0dae7c41c4d0d0e
    : end
    Tobias Korb, Jun 3, 2004
    #1
    1. Advertising

  2. Tobias Korb

    J Guest

    It looks correct

    frog
    www.ethernet.hk

    "Tobias Korb" <> wrote in message
    news:c9namn$oso$05$-online.com...
    > Hello,
    >
    > I want to use my PIX 501 only for HTTP and shoutcast Stream (Port 8002)

    für
    > Inside-> Out.
    > This is my config file... I want to no, is this ok or want can/must I
    > change??
    >
    > THX Tobi
    >
    > : Saved
    > : Written by enable_15 at 08:33:19.459 UTC Thu Jun 3 2004
    > PIX Version 6.3(3)
    > interface ethernet0 100full
    > interface ethernet1 100full
    > nameif ethernet0 outside security0
    > nameif ethernet1 inside security100
    > enable password xxxxx encrypted
    > passwd xxxxx encrypted
    > hostname JWFW
    > domain-name hks
    > fixup protocol dns maximum-length 512
    > fixup protocol ftp 21
    > fixup protocol h323 h225 1720
    > fixup protocol h323 ras 1718-1719
    > fixup protocol http 80
    > fixup protocol rsh 514
    > fixup protocol rtsp 554
    > fixup protocol sip 5060
    > fixup protocol sip udp 5060
    > fixup protocol skinny 2000
    > fixup protocol smtp 25
    > fixup protocol sqlnet 1521
    > fixup protocol tftp 69
    > names
    > access-list from-outside-coming-in permit icmp any any time-exceeded
    > access-list from-outside-coming-in permit icmp any any unreachable
    > access-list from-outside-coming-in deny ip any any
    > access-list from-in-coming-in permit tcp any any eq 8002
    > access-list from-in-coming-in permit tcp any any eq www
    > access-list from-in-coming-in deny ip any any
    > pager lines 24
    > logging on
    > logging timestamp
    > logging trap warnings
    > logging history warnings
    > logging facility 23
    > logging host inside 192.168.1.20
    > mtu outside 1500
    > mtu inside 1500
    > ip address outside 10.48.33.5 255.255.240.0
    > ip address inside 192.168.1.1 255.255.255.0
    > ip audit info action alarm
    > ip audit attack action alarm
    > pdm location 192.168.1.20 255.255.255.255 inside
    > pdm logging informational 100
    > pdm history enable
    > arp timeout 14400
    > global (outside) 10 interface
    > nat (inside) 10 0.0.0.0 0.0.0.0 0 0
    > access-group from-outside-coming-in in interface outside
    > access-group from-in-coming-in in interface inside
    > route outside 0.0.0.0 0.0.0.0 10.48.33.1 1
    > timeout xlate 0:05:00
    > timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
    > 1:00:00
    > timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    > timeout uauth 0:05:00 absolute
    > aaa-server TACACS+ protocol tacacs+
    > aaa-server RADIUS protocol radius
    > aaa-server LOCAL protocol local
    > http server enable
    > http 192.168.1.0 255.255.255.0 inside
    > http 192.168.1.20 255.255.255.255 inside
    > no snmp-server location
    > no snmp-server contact
    > snmp-server community public
    > no snmp-server enable traps
    > floodguard enable
    > telnet timeout 5
    > ssh 192.168.1.0 255.255.255.0 inside
    > ssh timeout 5
    > console timeout 0
    > dhcpd address 192.168.1.30-192.168.1.40 inside
    > dhcpd lease 3600
    > dhcpd ping_timeout 750
    > dhcpd auto_config outside
    > dhcpd enable inside
    > terminal width 80
    > Cryptochecksum:203d19ad5d657d09b0dae7c41c4d0d0e
    > : end
    >
    >
    >
    J, Jun 3, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Remco Bressers
    Replies:
    1
    Views:
    498
    Jyri Korhonen
    Nov 21, 2003
  2. Ada
    Replies:
    1
    Views:
    3,742
    Christoph Gartmann
    Jan 29, 2004
  3. GVB
    Replies:
    1
    Views:
    2,764
    Martin Bilgrav
    Feb 6, 2004
  4. beni
    Replies:
    6
    Views:
    9,945
    Neil Rowland
    Jun 7, 2004
  5. Replies:
    2
    Views:
    965
Loading...

Share This Page