PIX 515E with DMZ

Discussion in 'Cisco' started by Joko Kendil, Feb 18, 2004.

  1. Joko Kendil

    Joko Kendil Guest

    I am (a newbie) about to configure PIX 515E with DMZ. What I
    understood I will need two interface on my internal network, so I will
    need minimum one additional ethernet port, is that correct?

    Currently what is shipped to me only PIX 515E with 2 ethernet ports.
    One is eth0 and the other one is eth1.

    Please give me a hints on what's the best practices on implementing
    DMZ.

    I am thinking:
    NAT for my DMZ and PAT for my LAN.

    Please advise.

    Thanks,

    JK
     
    Joko Kendil, Feb 18, 2004
    #1
    1. Advertising

  2. Hi,

    If you want a DMZ you need a third interface. Either logical (using vlans on
    Pix OS 6.3) or physical by adding additional ethernet cards). The NAT/PAT
    setup seems logical.

    Erik

    "Joko Kendil" <> wrote in message
    news:...
    > I am (a newbie) about to configure PIX 515E with DMZ. What I
    > understood I will need two interface on my internal network, so I will
    > need minimum one additional ethernet port, is that correct?
    >
    > Currently what is shipped to me only PIX 515E with 2 ethernet ports.
    > One is eth0 and the other one is eth1.
    >
    > Please give me a hints on what's the best practices on implementing
    > DMZ.
    >
    > I am thinking:
    > NAT for my DMZ and PAT for my LAN.
    >
    > Please advise.
    >
    > Thanks,
    >
    > JK
     
    Erik Tamminga, Feb 22, 2004
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Tom
    Replies:
    1
    Views:
    1,303
    Walter Roberson
    Nov 20, 2004
  2. JohnC
    Replies:
    2
    Views:
    2,584
    JohnC
    Dec 1, 2004
  3. Whammer
    Replies:
    1
    Views:
    3,388
  4. Network-Guy

    Cisco PIX DMZ to DMZ Access

    Network-Guy, Sep 23, 2005, in forum: Cisco
    Replies:
    7
    Views:
    3,951
    Walter Roberson
    Sep 25, 2005
  5. Jack
    Replies:
    0
    Views:
    724
Loading...

Share This Page