PIX 506e installation

Discussion in 'General Computer Support' started by mbvales, Aug 11, 2006.

  1. mbvales

    mbvales

    Joined:
    Aug 11, 2006
    Messages:
    4
    Dear All,

    Hope someone can help me about my configuration. im not familiar on cisco firewall and this is my 1st time to setup.

    My current setup are as follows:

    1) ISP 202.164.141.19 (DNS)
    2) RCST Router 202.164.141.73
    3) ISA2000 (with 3 NICs)
    1.) 202.164.141.74 (Gateway: 202.164.141.73 & DNS: 202.164.141.19)
    2.) 192.168.0.20 (DNS: 192.168.0.1)
    3.) 10.10.1.100 (Reserve for WiFi interface)
    4) Switch

    Now, I want to install the PIX in between RCST and ISA and it looks like this:
    1) ISP 202.164.141.19 (DNS)
    2) RCST Router 202.164.141.73
    3) PIX (2 NIC)
    1.) 202.164.141.74 (Outside)
    2.) 192.168.1.1 (Inside)
    3) ISA2000 (with 3 NICs)
    1.) 192.168.1.2 (Gateway: 192.168.1.1 & DNS: ? )
    2.) 192.168.0.20 (DNS: 192.168.0.1)
    3.) 10.10.1.100 (Reserve for WiFi interface)
    4) Switch

    I tried these settings but doesn't work..dont know if there is a need in PIX to do routing or put the ISP DNS or a rules to allow internet..totally no idea; I just did trial and error...

    Is anybody out there can help me if the aboved configuration are correct and give some ideas for some steps and where I will put the gateway and DNS...Thanks in Advance

    - Moore
     
    mbvales, Aug 11, 2006
    #1
    1. Advertising

  2. mbvales

    ITHSC

    Joined:
    Aug 15, 2006
    Messages:
    5
    Location:
    United Kingdom
    Hi, Can you post your PIX config? Miss out all of the sensitive bits!
     
    ITHSC, Aug 15, 2006
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Michiel
    Replies:
    4
    Views:
    4,672
    Michiel
    Aug 22, 2006
  2. Michiel
    Replies:
    2
    Views:
    867
    Michiel
    Aug 22, 2006
  3. Michiel
    Replies:
    19
    Views:
    1,174
    Michiel
    Aug 24, 2006
  4. Michiel
    Replies:
    0
    Views:
    2,313
    Michiel
    Aug 25, 2006
  5. Mike

    pix 501 vs pix 506e?

    Mike, Mar 29, 2007, in forum: Cisco
    Replies:
    4
    Views:
    1,145
Loading...

Share This Page