Pioneer A05 Problems

Discussion in 'DVD Video' started by Bill Stock, Nov 27, 2003.

  1. Bill Stock

    Bill Stock Guest

    I purchased an A05 in March. Burned a few test DVDs successfully, but could
    not read them on the drive. I was able to read them on other drives.
    Replaced the drive with the dealer, but the new drive had the same problem.
    Called Pioneer TS, but they told me it was a software issue and could not
    help and did not track these issues. Not wishing to waste a week
    reinstalling from scratch I let the drive sit.

    Fortunately the power blackout fried the drive and I sent it back for
    repair. Two months and several calls/emails later I had the a replacement
    drive from Pioneer. Noticed that the SN on the frame does not match the SN
    in the BIOS (FrankenDrive). So I guess they were waiting for enough
    salvageable parts to send me a replacement. Anyway, the drive can now read
    the disks that I wrote several months ago on the other drive? I found this
    most weird. I suppose a Windows patch might have solved this problem, but I
    doubt it. I was using the same firmware version in both drives.

    But now, I can't seem to write a CD Image out to the drive. It complains
    about an invalid field in the parameter list. (See NERO log below). I swear
    this worked a few weeks ago! I've seen references to this elsewhere, but
    never a solution. Any ideas?

    BTW. I will never buy another PIONEER product. I don't care how good the
    geek rating is.


    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll':
    Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 8:37:36 PM
    Nero Version: 5.5.10.15
    Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 -
    5.5.10.15
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-105>Version: 1.33 - HA 1 TA 1 -
    5.5.10.15
    Adapter driver: <atapi> HA 1
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 0
    DMA: On
    DiskPeripheral : IBM-DTLA-307075 atapi Port 0 ID 1
    DMA: On
    DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 1 ID 0
    DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1
    DMA: On
    =======================

    AutoRun : 0
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 349MB (357600kB)
    Memory in use : 31 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    Wizard: On

    26.11.2003
    CueSheet
    9:03:24 PM #1 Phase 90 File dlgbrnst.cpp, Line 1655
    Buffer Underrun Protection activated

    9:03:24 PM #2 Text 0 File Reader.cpp, Line 115
    Reader running

    9:03:24 PM #3 Text 0 File Burncd.cpp, Line 3717
    Turn on Disc-At-Once, using CD-R/RW media

    9:03:24 PM #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    2 indices, index0 (150) provided
    original CD pos #0 + 300 (300) = #300/0:4.0
    relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    10 indices, index0 (150) provided
    original CD pos #0 + 12249 + 19957 + 40170 + 37410 + 44933 + 36858 +
    69798 + 88378 + 8988 (358741) = #358741/79:43.16
    relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    --------------------------------------------------------------

    9:03:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 211
    Last possible write address on media: 359848 (79:59.73)
    Last address to be written: 359190 (79:51.15)

    9:03:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 216
    Write in overburning mode: FALSE

    9:03:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 1630
    Recorder: PIONEER DVD-RW DVR-105;
    CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
    ATIP Data:
    Special Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4F 3B
    4A (LO 79:59.74)
    Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3:
    FF FF FF (invalid)

    9:03:29 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x20 Session Closed, CD fixated
    Tracks 1 to 2:
    TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 1051200
    TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 1051200 1401600
    839420576

    9:03:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    2 indices, index0 (150) provided
    original CD pos #0 + 300 (300) = #300/0:4.0
    relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length
    300 blocks [PIONEER DVD-RW DVR-105 ]
    1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    10 indices, index0 (150) provided
    original CD pos #0 + 12249 + 19957 + 40170 + 37410 + 44933 + 36858 +
    69798 + 88378 + 8988 (358741) = #358741/79:43.16
    relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length
    358741 blocks [PIONEER DVD-RW DVR-105 ]
    --------------------------------------------------------------

    9:03:29 PM #10 Phase 24 File dlgbrnst.cpp, Line 1655
    Caching of files started

    9:03:29 PM #11 Phase 25 File dlgbrnst.cpp, Line 1655
    Caching of files completed

    9:03:29 PM #12 Phase 36 File dlgbrnst.cpp, Line 1655
    Burn process started at 16x (2,400 KB/s)

    9:03:29 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #0

    9:03:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 1 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #450

    9:03:29 PM #15 Text 0 File Mmc.cpp, Line 13046
    StartDAO : CD-Text - Off

    9:03:29 PM #16 Text 0 File Mmc.cpp, Line 17499
    Set BUFE: supported -> ON

    9:03:29 PM #17 SCSI -1067 File Cdrdrv.cpp, Line 1203
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01E12000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x00
    CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x70 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x26 0x00

    9:03:29 PM #18 Text 0 File Mmc.cpp, Line 13304
    CueData, Len=112
    41 00 00 24 00 00 00 00
    41 01 00 20 00 00 00 00
    41 01 01 20 00 00 02 00
    41 02 00 20 00 00 06 00
    41 02 01 20 00 00 08 00
    41 02 02 20 00 02 33 18
    41 02 03 20 00 07 11 1f
    41 02 04 20 00 10 0d 01
    41 02 05 20 00 18 1f 3d
    41 02 06 20 00 22 1e 45
    41 02 07 20 00 2a 2a 1b
    41 02 08 20 00 3a 0d 00
    41 02 09 20 00 4d 33 1c
    41 aa 01 24 00 4f 33 10

    9:03:29 PM #19 DVDR -1067 File ThreadedTransferInterface.cpp, Line 1423
    Invalid field in parameter

    9:03:29 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1423
    Could not perform start of Disc-At-Once

    9:03:29 PM #21 Phase 38 File dlgbrnst.cpp, Line 1655
    Burn process failed at 16x (2,400 KB/s)

    9:03:29 PM #22 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.4.21, size=57744 bytes, created
    4/12/2003 1:51:08 PM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created
    4/12/2003 1:51:08 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/15/2003 12:00:00
    AM
    File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created
    6/19/2003 2:05:04 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
    0 (Security Option)
     
    Bill Stock, Nov 27, 2003
    #1
    1. Advertising

  2. On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:

    >I purchased an A05 in March. Burned a few test DVDs successfully, but could
    >not read them on the drive. I was able to read them on other drives.
    >Replaced the drive with the dealer, but the new drive had the same problem.
    >Called Pioneer TS, but they told me it was a software issue and could not
    >help and did not track these issues. Not wishing to waste a week
    >reinstalling from scratch I let the drive sit.


    Install Adaptec aspi or use W2K or XP SPTI. The Nero ASPI is causing
    all your problems. Look for ForceAspi, such as at
    http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
    and unistall Nero aspi.

    .Steve .
    >
    >Fortunately the power blackout fried the drive and I sent it back for
    >repair. Two months and several calls/emails later I had the a replacement
    >drive from Pioneer. Noticed that the SN on the frame does not match the SN
    >in the BIOS (FrankenDrive). So I guess they were waiting for enough
    >salvageable parts to send me a replacement. Anyway, the drive can now read
    >the disks that I wrote several months ago on the other drive? I found this
    >most weird. I suppose a Windows patch might have solved this problem, but I
    >doubt it. I was using the same firmware version in both drives.
    >
    >But now, I can't seem to write a CD Image out to the drive. It complains
    >about an invalid field in the parameter list. (See NERO log below). I swear
    >this worked a few weeks ago! I've seen references to this elsewhere, but
    >never a solution. Any ideas?
    >
    >BTW. I will never buy another PIONEER product. I don't care how good the
    >geek rating is.
    >
    >
    >Windows 2000 5.0
    >IA32
    >WinAspi: -
    >ahead WinASPI: File 'E:\Program Files\Ahead\Nero\Wnaspi32.dll':
    >Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 8:37:36 PM
    >Nero Version: 5.5.10.15
    >Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 -
    >5.5.10.15
    > Adapter driver: <atapi> HA 1
    > Drive buffer : 2000kB
    > Bus Type : default (0) -> ATAPI, detected: ATAPI
    >CD-ROM: <PIONEER DVD-RW DVR-105>Version: 1.33 - HA 1 TA 1 -
    >5.5.10.15
    > Adapter driver: <atapi> HA 1
    > Bus Type : default (0) -> ATAPI, detected: ATAPI
    >
    >=== Scsi-Device-Map ===
    >DiskPeripheral : MAXTOR 6L060J3 atapi Port 0 ID 0
    >DMA: On
    >DiskPeripheral : IBM-DTLA-307075 atapi Port 0 ID 1
    >DMA: On
    >DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 1 ID 0
    >DMA: On
    >CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1
    >DMA: On
    >=======================
    >
    >AutoRun : 0
    >Excluded drive IDs:
    >CmdQueuing : 1
    >CmdNotification: 2
    >WriteBufferSize: 74448896 (0) Byte
    >ShowDrvBufStat : 0
    >EraseSpeed : 0
    >BUFE : 0
    >Physical memory : 511MB (523760kB)
    >Free physical memory: 349MB (357600kB)
    >Memory in use : 31 %
    >Uncached PFiles: 0x0
    >Use Static Write Speed Table: 0
    >Use Inquiry : 1
    >Global Bus Type: default (0)
    >Check supported media : Enabled (1)
    >Wizard: On
    >
    >26.11.2003
    >CueSheet
    >9:03:24 PM #1 Phase 90 File dlgbrnst.cpp, Line 1655
    > Buffer Underrun Protection activated
    >
    >9:03:24 PM #2 Text 0 File Reader.cpp, Line 115
    > Reader running
    >
    >9:03:24 PM #3 Text 0 File Burncd.cpp, Line 3717
    > Turn on Disc-At-Once, using CD-R/RW media
    >
    >9:03:24 PM #4 Text 0 File ThreadedTransferInterface.cpp, Line 672
    > Setup items (original item values)
    > 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    > 2 indices, index0 (150) provided
    > original CD pos #0 + 300 (300) = #300/0:4.0
    > relocatable, CD pos for caching/writing not required/not required, no
    >patch infos
    > 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    > 10 indices, index0 (150) provided
    > original CD pos #0 + 12249 + 19957 + 40170 + 37410 + 44933 + 36858 +
    >69798 + 88378 + 8988 (358741) = #358741/79:43.16
    > relocatable, CD pos for caching/writing not required/not required, no
    >patch infos
    > --------------------------------------------------------------
    >
    >9:03:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 211
    > Last possible write address on media: 359848 (79:59.73)
    > Last address to be written: 359190 (79:51.15)
    >
    >9:03:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 216
    > Write in overburning mode: FALSE
    >
    >9:03:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 1630
    > Recorder: PIONEER DVD-RW DVR-105;
    > CDR code: 00 97 34 21; OSJ entry from: Mitsubishi Chemical
    > ATIP Data:
    > Special Info [hex] 1: C0 00 98, 2: 61 22 15 (LI 97:34.21), 3: 4F 3B
    >4A (LO 79:59.74)
    > Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3:
    >FF FF FF (invalid)
    >
    >9:03:29 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 824
    > Prepare recorder PIONEER DVD-RW DVR-105 for write in cue-sheet-DAO
    > DAO infos:
    > ==========
    > MCN:
    > TOCTYPE: 0x20 Session Closed, CD fixated
    > Tracks 1 to 2:
    > TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 1051200
    > TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 1051200 1401600
    >839420576
    >
    >9:03:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
    > Setup items (after recorder preparation)
    > 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    > 2 indices, index0 (150) provided
    > original CD pos #0 + 300 (300) = #300/0:4.0
    > relocatable, CD pos for caching/writing not required/not required, no
    >patch infos
    > -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length
    >300 blocks [PIONEER DVD-RW DVR-105 ]
    > 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
    > 10 indices, index0 (150) provided
    > original CD pos #0 + 12249 + 19957 + 40170 + 37410 + 44933 + 36858 +
    >69798 + 88378 + 8988 (358741) = #358741/79:43.16
    > relocatable, CD pos for caching/writing not required/not required, no
    >patch infos
    > -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length
    >358741 blocks [PIONEER DVD-RW DVR-105 ]
    > --------------------------------------------------------------
    >
    >9:03:29 PM #10 Phase 24 File dlgbrnst.cpp, Line 1655
    > Caching of files started
    >
    >9:03:29 PM #11 Phase 25 File dlgbrnst.cpp, Line 1655
    > Caching of files completed
    >
    >9:03:29 PM #12 Phase 36 File dlgbrnst.cpp, Line 1655
    > Burn process started at 16x (2,400 KB/s)
    >
    >9:03:29 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    > Verifying CD position of item 0 (relocatable, no CD pos, no patch infos,
    >orig at #0): write at #0
    >
    >9:03:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    > Verifying CD position of item 1 (relocatable, no CD pos, no patch infos,
    >orig at #0): write at #450
    >
    >9:03:29 PM #15 Text 0 File Mmc.cpp, Line 13046
    > StartDAO : CD-Text - Off
    >
    >9:03:29 PM #16 Text 0 File Mmc.cpp, Line 17499
    > Set BUFE: supported -> ON
    >
    >9:03:29 PM #17 SCSI -1067 File Cdrdrv.cpp, Line 1203
    > SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01E12000
    > Status: 0x04 (0x01, SCSI_ERR)
    > HA-Status 0x00 (0x00, OK)
    > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    > Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    > Sense Code: 0x26
    > Sense Qual: 0x00
    > CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x70 0x00 0x00 0x00
    > Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    > 0x00 0x00 0x00 0x00 0x26 0x00
    >
    >9:03:29 PM #18 Text 0 File Mmc.cpp, Line 13304
    > CueData, Len=112
    > 41 00 00 24 00 00 00 00
    > 41 01 00 20 00 00 00 00
    > 41 01 01 20 00 00 02 00
    > 41 02 00 20 00 00 06 00
    > 41 02 01 20 00 00 08 00
    > 41 02 02 20 00 02 33 18
    > 41 02 03 20 00 07 11 1f
    > 41 02 04 20 00 10 0d 01
    > 41 02 05 20 00 18 1f 3d
    > 41 02 06 20 00 22 1e 45
    > 41 02 07 20 00 2a 2a 1b
    > 41 02 08 20 00 3a 0d 00
    > 41 02 09 20 00 4d 33 1c
    > 41 aa 01 24 00 4f 33 10
    >
    >9:03:29 PM #19 DVDR -1067 File ThreadedTransferInterface.cpp, Line 1423
    > Invalid field in parameter
    >
    >9:03:29 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1423
    > Could not perform start of Disc-At-Once
    >
    >9:03:29 PM #21 Phase 38 File dlgbrnst.cpp, Line 1655
    > Burn process failed at 16x (2,400 KB/s)
    >
    >9:03:29 PM #22 Text 0 File Scsicmd.cpp, Line 406
    > SCSI not using temporary buffers
    > 20 out of 20 temporary buffers allocated
    >
    >
    >Existing drivers:
    >File 'Drivers\CDR4_2K.SYS': Ver=5.3.4.21, size=57744 bytes, created
    >4/12/2003 1:51:08 PM
    >File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created
    >4/12/2003 1:51:08 PM
    >File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/15/2003 12:00:00
    >AM
    >File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created
    >6/19/2003 2:05:04 PM (Adapter driver for rec)
    >
    >Registry Keys:
    >HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
    >0 (Security Option)
    >
    >
     
    Steve(JazzHunter), Nov 27, 2003
    #2
    1. Advertising

  3. Bill Stock

    ZC TGS Guest

    On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:


    >BTW. I will never buy another PIONEER product. I don't care how good the
    >geek rating is.



    From the experience I've had with Pioneer products I guess you just
    had a bit of unfortunate bad luck.

    I swear by Pioneer DVD products. I own the following Pioneer products
    and never had a problem with them at all.

    * Two Pioneer DVD players connected to two TV sets.

    * A Pionner A06 DVD Writer

    * A Pioneer DVD Rom

    On the other hand I've had problems with a Sony DVD player that I also
    own.
     
    ZC TGS, Nov 27, 2003
    #3
  4. Bill Stock

    Bill Stock Guest

    My first CD writer was a SONY. Need less to say the last SONY product I
    bought. Made a nice coffee warmer.

    I've had good luck with Yamaha (2) and TDK.



    "ZC TGS" <> wrote in message
    news:...
    > On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    >
    >
    > >BTW. I will never buy another PIONEER product. I don't care how good the
    > >geek rating is.

    >
    >
    > From the experience I've had with Pioneer products I guess you just
    > had a bit of unfortunate bad luck.
    >
    > I swear by Pioneer DVD products. I own the following Pioneer products
    > and never had a problem with them at all.
    >
    > * Two Pioneer DVD players connected to two TV sets.
    >
    > * A Pionner A06 DVD Writer
    >
    > * A Pioneer DVD Rom
    >
    > On the other hand I've had problems with a Sony DVD player that I also
    > own.
    >
    >
     
    Bill Stock, Nov 28, 2003
    #4
  5. Bill Stock

    Bill Stock Guest

    "Steve(JazzHunter)" <> wrote in message
    news:eek:...
    > On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    >
    > >I purchased an A05 in March. Burned a few test DVDs successfully, but

    could
    > >not read them on the drive. I was able to read them on other drives.
    > >Replaced the drive with the dealer, but the new drive had the same

    problem.
    > >Called Pioneer TS, but they told me it was a software issue and could not
    > >help and did not track these issues. Not wishing to waste a week
    > >reinstalling from scratch I let the drive sit.

    >
    > Install Adaptec aspi or use W2K or XP SPTI. The Nero ASPI is causing
    > all your problems. Look for ForceAspi, such as at
    > http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
    > and unistall Nero aspi.
    >
    > .Steve .


    Still no joy. Thanks anyway.
     
    Bill Stock, Nov 28, 2003
    #5
  6. Bill Stock

    ZC TGS Guest

    On Fri, 28 Nov 2003 01:05:54 GMT, "Bill Stock" <> wrote:

    >My first CD writer was a SONY. Need less to say the last SONY product I
    >bought. Made a nice coffee warmer.
    >
    >I've had good luck with Yamaha (2) and TDK.



    Yamaha make good products. Pity they stopped making CD-RW drives.
    Thankfully, I have a spare :)

    As for Pioneer, I still think you can't go wrong with them. I've got
    my eye on their new DVD Recorders to buy sometime next year.






    >"ZC TGS" <> wrote in message
    >news:...
    >> On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    >>
    >>
    >> >BTW. I will never buy another PIONEER product. I don't care how good the
    >> >geek rating is.

    >>
    >>
    >> From the experience I've had with Pioneer products I guess you just
    >> had a bit of unfortunate bad luck.
    >>
    >> I swear by Pioneer DVD products. I own the following Pioneer products
    >> and never had a problem with them at all.
    >>
    >> * Two Pioneer DVD players connected to two TV sets.
    >>
    >> * A Pionner A06 DVD Writer
    >>
    >> * A Pioneer DVD Rom
    >>
    >> On the other hand I've had problems with a Sony DVD player that I also
    >> own.
    >>
    >>

    >
     
    ZC TGS, Nov 28, 2003
    #6
  7. On Fri, 28 Nov 2003 01:07:04 GMT, "Bill Stock" <> wrote:

    >
    >"Steve(JazzHunter)" <> wrote in message
    >news:eek:...
    >> On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    >>
    >> >I purchased an A05 in March. Burned a few test DVDs successfully, but

    >could
    >> >not read them on the drive. I was able to read them on other drives.
    >> >Replaced the drive with the dealer, but the new drive had the same

    >problem.
    >> >Called Pioneer TS, but they told me it was a software issue and could not
    >> >help and did not track these issues. Not wishing to waste a week
    >> >reinstalling from scratch I let the drive sit.

    >>
    >> Install Adaptec aspi or use W2K or XP SPTI. The Nero ASPI is causing
    >> all your problems. Look for ForceAspi, such as at
    >> http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
    >> and unistall Nero aspi.
    >>
    >> .Steve .

    >
    >Still no joy. Thanks anyway.


    There are also a couple of buggy builds of Nero, with users having
    exactly the problerms you describe. Have you also used Alcohol etc.
    to burn discs? Or anything other than Nero? I have the Pioneer A04
    and A06 burners, and a Pioneer SCSI DVDrom and CD-burner. I've had
    two Pioneer CDroms, never a problem on any of these. My Plextor
    CDburner and Matsushita DVDrom also presented no problems. One thing
    for sure, Pioneer's are among the most dependable PC media devices you
    can own.

    . Steve .
    >
    >
     
    Steve(JazzHunter), Nov 28, 2003
    #7
  8. Bill Stock

    Bill Stock Guest

    "Steve(JazzHunter)" <> wrote in message
    news:...
    > On Fri, 28 Nov 2003 01:07:04 GMT, "Bill Stock" <> wrote:
    >
    > >
    > >"Steve(JazzHunter)" <> wrote in message
    > >news:eek:...
    > >> On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    > >>
    > >> >I purchased an A05 in March. Burned a few test DVDs successfully, but

    > >could
    > >> >not read them on the drive. I was able to read them on other drives.
    > >> >Replaced the drive with the dealer, but the new drive had the same

    > >problem.
    > >> >Called Pioneer TS, but they told me it was a software issue and could

    not
    > >> >help and did not track these issues. Not wishing to waste a week
    > >> >reinstalling from scratch I let the drive sit.
    > >>
    > >> Install Adaptec aspi or use W2K or XP SPTI. The Nero ASPI is causing
    > >> all your problems. Look for ForceAspi, such as at
    > >> http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
    > >> and unistall Nero aspi.
    > >>
    > >> .Steve .

    > >
    > >Still no joy. Thanks anyway.

    >
    > There are also a couple of buggy builds of Nero, with users having
    > exactly the problerms you describe. Have you also used Alcohol etc.
    > to burn discs? Or anything other than Nero? I have the Pioneer A04
    > and A06 burners, and a Pioneer SCSI DVDrom and CD-burner. I've had
    > two Pioneer CDroms, never a problem on any of these. My Plextor
    > CDburner and Matsushita DVDrom also presented no problems. One thing
    > for sure, Pioneer's are among the most dependable PC media devices you
    > can own.
    >
    > . Steve .
    > >
    > >

    >


    Might try taking the Alcohol internally to see if that helps. :)

    I have CDRWin installed, but it gives the same error. Pretty sure this was
    working at one point. I'll have to burn a DVD again to see if that's still
    OK.

    Been burning the CDs on the laptop in the meantime.
     
    Bill Stock, Nov 28, 2003
    #8
  9. On Fri, 28 Nov 2003 02:52:58 GMT, "Bill Stock" <> wrote:

    >
    >"Steve(JazzHunter)" <> wrote in message
    >news:...
    >> On Fri, 28 Nov 2003 01:07:04 GMT, "Bill Stock" <> wrote:
    >>
    >> >
    >> >"Steve(JazzHunter)" <> wrote in message
    >> >news:eek:...
    >> >> On Thu, 27 Nov 2003 18:56:54 GMT, "Bill Stock" <> wrote:
    >> >>
    >> >> >I purchased an A05 in March. Burned a few test DVDs successfully, but
    >> >could
    >> >> >not read them on the drive. I was able to read them on other drives.
    >> >> >Replaced the drive with the dealer, but the new drive had the same
    >> >problem.
    >> >> >Called Pioneer TS, but they told me it was a software issue and could

    >not
    >> >> >help and did not track these issues. Not wishing to waste a week
    >> >> >reinstalling from scratch I let the drive sit.
    >> >>
    >> >> Install Adaptec aspi or use W2K or XP SPTI. The Nero ASPI is causing
    >> >> all your problems. Look for ForceAspi, such as at
    >> >> http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
    >> >> and unistall Nero aspi.
    >> >>
    >> >> .Steve .
    >> >
    >> >Still no joy. Thanks anyway.

    >>
    >> There are also a couple of buggy builds of Nero, with users having
    >> exactly the problerms you describe. Have you also used Alcohol etc.
    >> to burn discs? Or anything other than Nero? I have the Pioneer A04
    >> and A06 burners, and a Pioneer SCSI DVDrom and CD-burner. I've had
    >> two Pioneer CDroms, never a problem on any of these. My Plextor
    >> CDburner and Matsushita DVDrom also presented no problems. One thing
    >> for sure, Pioneer's are among the most dependable PC media devices you
    >> can own.
    >>
    >> . Steve .
    >> >
    >> >

    >>

    >
    >Might try taking the Alcohol internally to see if that helps. :)
    >
    >I have CDRWin installed, but it gives the same error. Pretty sure this was
    >working at one point. I'll have to burn a DVD again to see if that's still
    >OK.


    CDRwin us great, but the good late version 3 builds don't support DVD,
    Alcohol 120% is THE best burnng program for images such as bin/cue,
    ISO NRG, even CloneCD It just concistently WORKS, that's all. Also the
    DVD burning module with Tmpenc-DVDauthor has always worked for me..

    I'm sure you tried yourself to upgrade the AO5 firmware of course. For
    My AO6 I installed a hacked version which removed region coding and
    allowed burning overspeed and burn and read silent mode. Vey useful.

    . Steve.

    .. Steve..
    >
    >Been burning the CDs on the laptop in the meantime.
    >
    >
     
    Steve(JazzHunter), Nov 28, 2003
    #9
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. unholy
    Replies:
    12
    Views:
    4,588
    unholy
    Jul 11, 2005
  2. mememememe

    install pioneer drive problems

    mememememe, Feb 16, 2005, in forum: Computer Support
    Replies:
    7
    Views:
    1,996
    dawg2626
    Oct 25, 2006
  3. EBuyerdotcon

    Re: Pioneer DVR-105 and Nero Problems

    EBuyerdotcon, Aug 7, 2003, in forum: DVD Video
    Replies:
    0
    Views:
    431
    EBuyerdotcon
    Aug 7, 2003
  4. CAM
    Replies:
    0
    Views:
    711
  5. Ian

    Titan Bianca TWC-A05 Water Cooler

    Ian, Jun 29, 2005, in forum: Article Discussion
    Replies:
    0
    Views:
    12,726
Loading...

Share This Page