PAP2 configuration

Discussion in 'UK VOIP' started by Rich, May 19, 2007.

  1. Rich

    Rich Guest

    Hi

    Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
    today. I'm having problems getting it to work.

    Done a google but still no joy.

    Dial **** to access the IVR Menu, then enter 110#

    It then reads out : 192.168.15.113

    100# Check DHCP (ENABLED)
    101# Set DHCP (1=enable, 0=disable)
    110# Check IP address - (192.168.15.113)
    111# Set IP address (* = .)
    120# Check Netmask - (255.255.255.0)
    121# Set Net Mask (* = .)
    130# Check Gateway - (192.168.15.1)
    131# Set Gateway (* = .)
    140# Check MAC Address
    150# Check Firmware Version = (3.1.9C)
    732668# Manual Reboot of Unit

    My netgear router doesn't see the adaptor : see below basic details on
    the router network.

    ADSL Port
    MAC Address 00:18:4D:11:F8:69
    IP Address ##.##.##.## (Internet IP)
    Network Type PPPoA
    IP Subnet Mask 255.255.255.255
    Gateway IP Address 195.189.158.102
    Domain Name Server 87.86.189.16

    LAN Port
    MAC Address 00:18:4D:11:F8:68
    IP Address 192.168.0.1
    DHCP On
    IP Subnet Mask 255.255.255.0

    The only way I've managed to get into the PAP2 configuration menu is
    to turn off DCHP and allocate a static IP - in this case 192.168.0.55
    (but the router still doesn't see the adaptor) but I can login to the
    web frontend via Firefox.

    DHCP: Disabled Current IP: 192.168.0.55
    Host Name: LinksysPAP Domain:
    Current Netmask: 0.0.0.0 Current Gateway:
    0.0.0.0
    Primary DNS:
    Secondary DNS:
    Product Information
    Product Name: PAP2-NA Serial Number: FH900EC15081
    Software Version: 3.1.9(LSc) Hardware
    Version: 0.03.4
    MAC Address: 371217FD5031 Client Certificate:
    Installed
    Customization: Not Customized
    System Status
    Current Time: 1/1/2003 12:07:14 Elapsed Time:
    00:00:07
    Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
    0
    Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
    0
    Broadcast Pkts Dropped: 0 Broadcast Bytes
    Dropped: 0
    RTP Packets Sent: 0 RTP Bytes Sent: 0
    RTP Packets Recv: 0 RTP Bytes Recv: 0
    SIP Messages Sent: 0 SIP Bytes Sent: 0
    SIP Messages Recv: 0 SIP Bytes Recv: 0
    External IP:

    Looking at the above stats - seems to be that the internet is not
    accessable - No external IP?

    Any ideas where I'm going wrong? Ideally I want the router to detect
    it and allocate a IP address on the internet network accordlying.

    Can anyone help?

    Thanks.

    Rich
    Rich, May 19, 2007
    #1
    1. Advertising

  2. Rich

    Loz Guest

    Rich wrote:
    > Hi
    >
    > Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
    > today. I'm having problems getting it to work.


    <snip>

    >
    > The only way I've managed to get into the PAP2 configuration menu is
    > to turn off DCHP and allocate a static IP - in this case 192.168.0.55
    > (but the router still doesn't see the adaptor) but I can login to the
    > web frontend via Firefox.
    >
    > DHCP: Disabled Current IP: 192.168.0.55
    > Host Name: LinksysPAP Domain:
    > Current Netmask: 0.0.0.0 Current Gateway:
    > 0.0.0.0




    The reason the first instance doesn't work is because of it's in a
    seperate network (i.e: Not 192.168.0.0/24)

    In the latter setting you'll need to set the DNS server and default
    gateway. Default gateway will be 192.168.0.1, DNS probably the same.
    Loz, May 19, 2007
    #2
    1. Advertising

  3. Rich

    It's Me Guest

    "Rich" <> wrote in message
    news:...
    > Hi
    >
    > Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
    > today. I'm having problems getting it to work.
    >
    > Done a google but still no joy.
    >
    > Dial **** to access the IVR Menu, then enter 110#
    >
    > It then reads out : 192.168.15.113
    >
    > 100# Check DHCP (ENABLED)
    > 101# Set DHCP (1=enable, 0=disable)
    > 110# Check IP address - (192.168.15.113)
    > 111# Set IP address (* = .)
    > 120# Check Netmask - (255.255.255.0)
    > 121# Set Net Mask (* = .)
    > 130# Check Gateway - (192.168.15.1)
    > 131# Set Gateway (* = .)
    > 140# Check MAC Address
    > 150# Check Firmware Version = (3.1.9C)
    > 732668# Manual Reboot of Unit
    >
    > My netgear router doesn't see the adaptor : see below basic details on
    > the router network.
    >
    > ADSL Port
    > MAC Address 00:18:4D:11:F8:69
    > IP Address ##.##.##.## (Internet IP)
    > Network Type PPPoA
    > IP Subnet Mask 255.255.255.255
    > Gateway IP Address 195.189.158.102
    > Domain Name Server 87.86.189.16
    >
    > LAN Port
    > MAC Address 00:18:4D:11:F8:68
    > IP Address 192.168.0.1
    > DHCP On
    > IP Subnet Mask 255.255.255.0
    >
    > The only way I've managed to get into the PAP2 configuration menu is
    > to turn off DCHP and allocate a static IP - in this case 192.168.0.55
    > (but the router still doesn't see the adaptor) but I can login to the
    > web frontend via Firefox.
    >
    > DHCP: Disabled Current IP: 192.168.0.55
    > Host Name: LinksysPAP Domain:
    > Current Netmask: 0.0.0.0 Current Gateway:
    > 0.0.0.0
    > Primary DNS:
    > Secondary DNS:
    > Product Information
    > Product Name: PAP2-NA Serial Number: FH900EC15081
    > Software Version: 3.1.9(LSc) Hardware
    > Version: 0.03.4
    > MAC Address: 371217FD5031 Client Certificate:
    > Installed
    > Customization: Not Customized
    > System Status
    > Current Time: 1/1/2003 12:07:14 Elapsed Time:
    > 00:00:07
    > Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
    > 0
    > Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
    > 0
    > Broadcast Pkts Dropped: 0 Broadcast Bytes
    > Dropped: 0
    > RTP Packets Sent: 0 RTP Bytes Sent: 0
    > RTP Packets Recv: 0 RTP Bytes Recv: 0
    > SIP Messages Sent: 0 SIP Bytes Sent: 0
    > SIP Messages Recv: 0 SIP Bytes Recv: 0
    > External IP:
    >
    > Looking at the above stats - seems to be that the internet is not
    > accessable - No external IP?
    >
    > Any ideas where I'm going wrong? Ideally I want the router to detect
    > it and allocate a IP address on the internet network accordlying.
    >
    > Can anyone help?
    >
    > Thanks.
    >
    > Rich


    I have a netgear router DG 834G and I had same thing the other day.

    Do what Loz said, set Default gateway to 192.168.0.1

    Did you buy it off billionax? If so why does it sate "Software Version:
    3.1.9(LSc)"

    It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
    access the ADMIN settings?

    Make sure you set "Provision Enable is set to NO."

    I updated mine to "v3.1.22-LS"
    It's Me, May 19, 2007
    #3
  4. Rich

    Rich Guest

    On Sat, 19 May 2007 15:49:40 +0100, "It's Me" <> wrote:
    2.168.0.55

    >
    >I have a netgear router DG 834G and I had same thing the other day.
    >
    >Do what Loz said, set Default gateway to 192.168.0.1
    >


    Tried setting the gateway to 192.168.0.1 but get IP no. 0.0.0.0 until
    it gives in and uses the static one 192.168.0.55

    >Did you buy it off billionax? If so why does it sate "Software Version:
    >3.1.9(LSc)"
    >


    Yeah he's the guy. Software version 3.1.9(LSc)

    >It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
    >access the ADMIN settings?
    >


    It seems to be unlocked can access all the admin settings in the web
    frontend.

    >Make sure you set "Provision Enable is set to NO."
    >
    >I updated mine to "v3.1.22-LS"
    >


    DHCP: Enabled Current IP: 192.168.0.55
    Host Name: PAP2-NA Domain:
    Current Netmask: 255.255.255.0 Current
    Gateway: 192.168.0.1
    Primary DNS: 192.168.0.1
    Secondary DNS:
    Product Information
    Product Name: PAP2-NA Serial Number: FH900EC15081
    Software Version: 3.1.9(LSc) Hardware
    Version: 0.03.4
    MAC Address: 371217FD5031 Client Certificate:
    Installed
    Customization: Not Customized
    System Status
    Current Time: 1/1/2003 12:48:13 Elapsed Time:
    00:00:31
    Broadcast Pkts Sent: 8 Broadcast Bytes Sent:
    2736
    Broadcast Pkts Recv: 772 Broadcast Bytes Recv:
    49434
    Broadcast Pkts Dropped: 0 Broadcast Bytes
    Dropped: 0
    RTP Packets Sent: 0 RTP Bytes Sent: 0
    RTP Packets Recv: 0 RTP Bytes Recv: 0
    SIP Messages Sent: 0 SIP Bytes Sent: 0
    SIP Messages Recv: 0 SIP Bytes Recv: 0
    External IP:

    Thanks.

    Rich
    Rich, May 19, 2007
    #4
  5. Rich

    Nick Guest

    "It's Me" <> wrote in message
    news:464f0e7f$0$10736$...
    >
    > "Rich" <> wrote in message
    > news:...
    > > Hi
    > >
    > > Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
    > > today. I'm having problems getting it to work.
    > >
    > > Done a google but still no joy.
    > >
    > > Dial **** to access the IVR Menu, then enter 110#
    > >
    > > It then reads out : 192.168.15.113
    > >
    > > 100# Check DHCP (ENABLED)
    > > 101# Set DHCP (1=enable, 0=disable)
    > > 110# Check IP address - (192.168.15.113)
    > > 111# Set IP address (* = .)
    > > 120# Check Netmask - (255.255.255.0)
    > > 121# Set Net Mask (* = .)
    > > 130# Check Gateway - (192.168.15.1)
    > > 131# Set Gateway (* = .)
    > > 140# Check MAC Address
    > > 150# Check Firmware Version = (3.1.9C)
    > > 732668# Manual Reboot of Unit
    > >
    > > My netgear router doesn't see the adaptor : see below basic details on
    > > the router network.
    > >
    > > ADSL Port
    > > MAC Address 00:18:4D:11:F8:69
    > > IP Address ##.##.##.## (Internet IP)
    > > Network Type PPPoA
    > > IP Subnet Mask 255.255.255.255
    > > Gateway IP Address 195.189.158.102
    > > Domain Name Server 87.86.189.16
    > >
    > > LAN Port
    > > MAC Address 00:18:4D:11:F8:68
    > > IP Address 192.168.0.1
    > > DHCP On
    > > IP Subnet Mask 255.255.255.0
    > >
    > > The only way I've managed to get into the PAP2 configuration menu is
    > > to turn off DCHP and allocate a static IP - in this case 192.168.0.55
    > > (but the router still doesn't see the adaptor) but I can login to the
    > > web frontend via Firefox.
    > >
    > > DHCP: Disabled Current IP: 192.168.0.55
    > > Host Name: LinksysPAP Domain:
    > > Current Netmask: 0.0.0.0 Current Gateway:
    > > 0.0.0.0
    > > Primary DNS:
    > > Secondary DNS:
    > > Product Information
    > > Product Name: PAP2-NA Serial Number: FH900EC15081
    > > Software Version: 3.1.9(LSc) Hardware
    > > Version: 0.03.4
    > > MAC Address: 371217FD5031 Client Certificate:
    > > Installed
    > > Customization: Not Customized
    > > System Status
    > > Current Time: 1/1/2003 12:07:14 Elapsed Time:
    > > 00:00:07
    > > Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
    > > 0
    > > Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
    > > 0
    > > Broadcast Pkts Dropped: 0 Broadcast Bytes
    > > Dropped: 0
    > > RTP Packets Sent: 0 RTP Bytes Sent: 0
    > > RTP Packets Recv: 0 RTP Bytes Recv: 0
    > > SIP Messages Sent: 0 SIP Bytes Sent: 0
    > > SIP Messages Recv: 0 SIP Bytes Recv: 0
    > > External IP:
    > >
    > > Looking at the above stats - seems to be that the internet is not
    > > accessable - No external IP?
    > >
    > > Any ideas where I'm going wrong? Ideally I want the router to detect
    > > it and allocate a IP address on the internet network accordlying.
    > >
    > > Can anyone help?
    > >
    > > Thanks.
    > >
    > > Rich

    >
    > I have a netgear router DG 834G and I had same thing the other day.
    >
    > Do what Loz said, set Default gateway to 192.168.0.1
    >
    > Did you buy it off billionax? If so why does it sate "Software Version:
    > 3.1.9(LSc)"
    >
    > It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
    > access the ADMIN settings?
    >
    > Make sure you set "Provision Enable is set to NO."
    >
    > I updated mine to "v3.1.22-LS"
    >
    >

    How did you load the firmware if it was locked?
    Have a PAP2 that I bought understanding it was
    unlocked, it isn't. Can't do anything with it and all
    my internet searches suggest the same.

    I've nothing to loose by having a play if you wouldn't
    mind telling me how to and the location of the code.
    Nick, May 19, 2007
    #5
  6. Rich

    It's Me Guest


    >>
    >> It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
    >> access the ADMIN settings?
    >>
    >> Make sure you set "Provision Enable is set to NO."
    >>
    >> I updated mine to "v3.1.22-LS"
    >>
    >>

    > How did you load the firmware if it was locked?
    > Have a PAP2 that I bought understanding it was
    > unlocked, it isn't. Can't do anything with it and all
    > my internet searches suggest the same.
    >
    > I've nothing to loose by having a play if you wouldn't
    > mind telling me how to and the location of the code.
    >
    >


    Mine was not locked, sorry if I confused you.
    It's Me, May 19, 2007
    #6
  7. Rich

    It's Me Guest


    >>

    >
    > DHCP: Enabled Current IP: 192.168.0.55
    > Host Name: PAP2-NA Domain:
    > Current Netmask: 255.255.255.0 Current
    > Gateway: 192.168.0.1
    > Primary DNS: 192.168.0.1
    > Secondary DNS:



    I am no expert on this infact a newbie too but some things dont look right
    to me.

    DHCP: Enabled Current IP: 192.168.0.55 <<< Looks right (I set mine up
    manual to 192.168.0.100)
    Host Name: PAP2-NA Domain:
    Current Netmask: 255.255.255.0 Current
    Gateway: 192.168.0.1 << Looks right if routers IP
    Primary DNS: 192.168.0.1 <<< think this should be ISP DNS aadress, should
    see value in router.

    Have you setup router rules for PAP2 (port forwarding)?


    TFTP UDP 69 >>> PAP2 IP (192.168.0.55)
    UDP 10000 - 20000 >>> PAP2 IP (192.168.0.55)
    UDP 53 >>> PAP2 IP (192.168.0.55)
    UDP 5060 - 5070 >>> PAP2 IP (192.168.0.55)
    It's Me, May 19, 2007
    #7
  8. It's Me wrote:
    >> DHCP: Enabled Current IP: 192.168.0.55
    >> Host Name: PAP2-NA Domain:
    >> Current Netmask: 255.255.255.0 Current
    >> Gateway: 192.168.0.1
    >> Primary DNS: 192.168.0.1
    >> Secondary DNS:

    >
    >
    > I am no expert on this infact a newbie too but some things dont look
    > right to me.
    >
    > DHCP: Enabled Current IP: 192.168.0.55 <<< Looks right (I set mine
    > up manual to 192.168.0.100)
    > Host Name: PAP2-NA Domain:
    > Current Netmask: 255.255.255.0 Current
    > Gateway: 192.168.0.1 << Looks right if routers IP
    > Primary DNS: 192.168.0.1 <<< think this should be ISP DNS aadress,
    > should see value in router.
    >


    Mine has my ISP DNS servers.

    Though have DNS Server Order: set to DHCP,Manual.

    DNS Query Mode: Parallel


    > Have you setup router rules for PAP2 (port forwarding)?
    >
    >
    > TFTP UDP 69 >>> PAP2 IP (192.168.0.55)
    > UDP 10000 - 20000 >>> PAP2 IP (192.168.0.55)
    > UDP 53 >>> PAP2 IP (192.168.0.55)
    > UDP 5060 - 5070 >>> PAP2 IP (192.168.0.55)


    Though mine I now have as DHCP: NO, this was yes and left it to do all
    the work, but as I'm often moving cables / PCs around I set it to NO and
    set it myself.
    {{{{{Welcome}}}}}, May 19, 2007
    #8
  9. Rich

    Rich Guest

    On Sat, 19 May 2007 16:56:09 GMT, "{{{{{Welcome}}}}}"
    <bhx___spam@trapped___hotmail.co.uk> wrote:

    >
    >Mine has my ISP DNS servers.
    >
    >Though have DNS Server Order: set to DHCP,Manual.
    >
    >DNS Query Mode: Parallel
    >


    Must of been looking and playing around now for over 5 hours with no
    luck.

    Keep getting the error

    Registration State: Can't connect to login server

    I have tried the softphone and my sipgate.co.uk aacount works OK. All
    the firewall forwarding is in place.

    Just don't know whats wrong - the internet not working or the voip
    account settings.

    Is there any way to check that it can see the internet?

    What does "Can't connect to login server " even mean? password wrong,
    wrong server name, or no internet.

    Plus the date is wrong - even with a GMT server in it
    europe.pool.ntp.org which again leads me to the internet not
    working???

    Should External IP:be blank or show the external IP?

    Rich
    Rich, May 19, 2007
    #9
  10. Rich

    It's Me Guest

    "Rich" <> wrote in message
    news:...
    > On Sat, 19 May 2007 16:56:09 GMT, "{{{{{Welcome}}}}}"
    > <bhx___spam@trapped___hotmail.co.uk> wrote:
    >
    >>
    >>Mine has my ISP DNS servers.
    >>
    >>Though have DNS Server Order: set to DHCP,Manual.
    >>
    >>DNS Query Mode: Parallel
    >>

    >
    > Must of been looking and playing around now for over 5 hours with no
    > luck.
    >
    > Keep getting the error
    >
    > Registration State: Can't connect to login server
    >
    > I have tried the softphone and my sipgate.co.uk aacount works OK. All
    > the firewall forwarding is in place.
    >
    > Just don't know whats wrong - the internet not working or the voip
    > account settings.
    >
    > Is there any way to check that it can see the internet?
    >
    > What does "Can't connect to login server " even mean? password wrong,
    > wrong server name, or no internet.
    >
    > Plus the date is wrong - even with a GMT server in it
    > europe.pool.ntp.org which again leads me to the internet not
    > working???
    >
    > Should External IP:be blank or show the external IP?
    >
    > Rich


    Did you change the DNS?

    Do you have three blue lights on the PAP2?

    Could you have a faulty network cable?

    Is the cable pushed right in correctly?

    I suspect if you have not change it the DNS is wrong, what is your ISP?
    It's Me, May 20, 2007
    #10
  11. Rich

    It's Me Guest

    It's Me, May 20, 2007
    #11
  12. Rich

    Jono Guest

    It's Me has brought this to us :
    > Here is a pic of what mine looks like.
    >
    > http://www.kenspace.myzen.co.uk/pics/pap2 pic.jpg


    or, without the break:-

    <http://www.kenspace.myzen.co.uk/pics/pap2%20pic.jpg>
    Jono, May 20, 2007
    #12
  13. Rich

    sally Guest

    Rich

    I bought my PAP2 (firmware 3.1.22(LS)) from ebay too which is running
    behind my linksys WRT54G and I have open the folliwing port

    UDP 69
    UDP 10000 - 20000
    UDP 53
    UDP 5060 - 5070

    but I keep getting "Registration State: Can't connect to login server"

    Did you manage to get "online"?
    sally, May 20, 2007
    #13
  14. Rich

    Jono Guest

    After serious thinking sally wrote :
    > Rich
    >
    > I bought my PAP2 (firmware 3.1.22(LS)) from ebay too which is running
    > behind my linksys WRT54G and I have open the folliwing port
    >
    > UDP 69
    > UDP 10000 - 20000
    > UDP 53
    > UDP 5060 - 5070
    >
    > but I keep getting "Registration State: Can't connect to login server"
    >
    > Did you manage to get "online"?


    Which model/version WRT54G do you have?

    If you have a suitable version, loading the DD-WRT (Voip) firmware
    would remove the need for any port forwarding, or use of the DMZ.

    <http://www.dd-wrt.com/dd-wrtv2/index.php>
    Jono, May 20, 2007
    #14
  15. Rich wrote:
    > On Sat, 19 May 2007 16:56:09 GMT, "{{{{{Welcome}}}}}"
    > <bhx___spam@trapped___hotmail.co.uk> wrote:
    >
    >>
    >> Mine has my ISP DNS servers.
    >>
    >> Though have DNS Server Order: set to DHCP,Manual.
    >>
    >> DNS Query Mode: Parallel
    >>

    >
    > Must of been looking and playing around now for over 5 hours with no
    > luck.
    >
    > Keep getting the error
    >
    > Registration State: Can't connect to login server
    >
    > I have tried the softphone and my sipgate.co.uk aacount works OK. All
    > the firewall forwarding is in place.
    >
    > Just don't know whats wrong - the internet not working or the voip
    > account settings.
    >
    > Is there any way to check that it can see the internet?
    >
    > What does "Can't connect to login server " even mean? password wrong,
    > wrong server name, or no internet.
    >
    > Plus the date is wrong - even with a GMT server in it
    > europe.pool.ntp.org which again leads me to the internet not
    > working???
    >
    > Should External IP:be blank or show the external IP?
    >
    > Rich



    Have you tried it with DCHP enabled: and switched everything off, and
    then everything back on one by one, with the PAP2 being the last?
    {{{{{Welcome}}}}}, May 20, 2007
    #15
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. jester
    Replies:
    1
    Views:
    1,736
    Vivek
    Dec 20, 2005
  2. Replies:
    0
    Views:
    770
  3. Kyler Laird
    Replies:
    55
    Views:
    9,769
    william
    Mar 25, 2005
  4. Joe
    Replies:
    6
    Views:
    1,739
  5. Stan
    Replies:
    25
    Views:
    2,967
Loading...

Share This Page