%PA-3-NOTSUPPORTED

Discussion in 'Cisco' started by Jan, Oct 4, 2004.

  1. Jan

    Jan Guest

    Got 2610XM with NM-HD-2V and VIC2-2BRI. Loaded IP-PLus and IP-Voice 12.3.10
    but
    get following error message:

    ---
    *Mar 1 00:00:10.440: %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 923))
    is not supported on this image.
    Please issue "show diag" in fully loaded IOS image
    to get the PA's information and verify if it is supported
    by this image, a newer version may be needed.
    ---

    Following IOS images where loaded to test:
    c2600-is-mz.123-10.bin
    c2600-ipvoice-mz.123-10.bin

    ---
    SIP01#sh diag
    Slot 0:
    C2610XM 1FE Mainboard Port adapter, 3 ports
    Port adapter is analyzed
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 1.0
    PCB Serial Number : xxxx
    Part Number : 73-7677-02
    RMA History : 00
    RMA Number : 0-0-0-0
    Board Revision : A0
    Deviation Number : 0-0
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 03 6A 41 01 00 C1 18 4A 41 44 30 37 30
    0x10: 32 30 42 31 59 20 28 33 38 39 35 32 37 39 32 37
    0x20: 32 29 82 49 1D FD 02 04 00 81 00 00 00 00 42 41
    0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    WIC Slot 1:
    Two Port Modem WIC
    Hardware revision 1.0 Board revision C0
    Serial number xxxx Part number 800-08283-01
    Test history 0x0 RMA number 00-00-00
    Connector type Wan Module
    EEPROM format version 1
    EEPROM contents (hex):
    0x20: 01 37 01 00 01 C1 13 52 50 20 5B 01 00 00 00 00
    0x30: 60 00 00 00 02 12 14 01 FF FF FF FF FF FF FF FF

    Slot 1:
    Unknown (type 923) Port adapter
    Port adapter is disabled
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 5.1
    Top Assy. Part Number : 800-21591-01
    Board Revision : B0
    Deviation Number : 0-0
    Fab Version : 03
    PCB Serial Number : xxxxxx
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Version Identifier (VID) : V
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 03 9B 41 05 01 C0 46 03 20 00 54 57 01
    0x10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 30
    0x20: 38 32 39 30 38 56 41 03 00 81 00 00 00 00 04 00
    0x30: 89 56 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    ---
     
    Jan, Oct 4, 2004
    #1
    1. Advertising

  2. Jan wrote:
    > Got 2610XM with NM-HD-2V and VIC2-2BRI. Loaded IP-PLus and IP-Voice
    > 12.3.10 but get following error message:
    > *Mar 1 00:00:10.440: %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 923))
    > Following IOS images where loaded to test:
    > c2600-is-mz.123-10.bin
    > c2600-ipvoice-mz.123-10.bin


    You will need 12.3T train image to support VIC2-2BRI card.

    --
    this space was intentionally left blank | £ukasz Bromirski
    you can insert your favourite quote here | lukasz:bromirski,net
     
    =?ISO-8859-2?Q?=A3ukasz_Bromirski?=, Oct 4, 2004
    #2
    1. Advertising

  3. Jan

    sasami009

    Joined:
    Mar 27, 2009
    Messages:
    5
    /sasami009/blog/item/6d12130780e3e57c020881fe.html 磁力泵的结构特点/sasami009/blog/item/dd19ef449df83b38879473f7.html 各种真空泵的工作原理/sasami009/blog/item/f013cedfb8ef3e5fccbf1af4.html 如何正确使用标准化工泵/sasami009/blog/item/b35fab8998546893a4c272ea.html 齿轮油泵故障分析及排除方法/sasami009/blog/item/f478f834e0b7081690ef39e9.html 五大离心泵保管对策/sasami009/blog/item/f478f834e0b7081690ef39e9.html /sasami009/blog/item/92c4e183f43023b86c8119ef.html 管道泵的使用要点 /sasami009/blog/item/a61bdc8a1ff5ce789e2fb423.html 水泵检验标准 引言 </p>
    <p> sasami009.blog.163.com/blog/static/1097551702009226105455417/ 阀门的作用是什么?对阀门有哪些要求?
    sasami009.blog.163.com/blog/static/1097551702009226105417609/ 排气阀概述
    sasami009.blog.163.com/blog/static/109755170200912041730818/ 离心泵的安装技术
    sasami009.blog.163.com/blog/static/10975517020091204111215/ 自吸泵小知识
    sasami009.blog.163.com/blog/static/1097551702009120412749/ 磁力泵的使用与维修
    sasami009.blog.163.com/blog/static/109755170200912034711548/ 气动隔膜泵的原理和使用领域
     
    sasami009, Mar 27, 2009
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.

Share This Page