opening port in PIX 501

Discussion in 'Cisco' started by mykke101, May 16, 2011.

  1. mykke101

    mykke101

    Joined:
    May 16, 2011
    Messages:
    1
    Hi Cisco Noob here,

    I need to point my PIX 501 to port 2638 so i can connect to sql server through port.

    PIX Version 6.3(3)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 dmz security0
    nameif ethernet1 inside security100
    enable password xxxxxx encrypted
    passwd xxxxxxxxxx encrypted
    hostname vectordmz
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    access-list nonat_inside permit ip any any
    access-list nonat_dmz permit ip 192.168.2.0 255.255.250.0 192.168.1.0 255.255.255.0
    access-list nonat_dmz permit ip 192.168.2.0 255.255.250.0 192.168.100.0 255.255.255.0
    access-list nonat_dmz deny ip any any
    access-list dmz-in permit icmp any any
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 eq www
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 eq https
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 eq citrix-ica
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 eq 2598
    access-list dmz-in permit udp 192.168.2.0 255.255.255.0 host 192.168.1.210 eq domain
    access-list dmz-in deny ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
    access-list dmz-in permit ip any any
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0 eq www
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0 eq https
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0 eq citrix-ica
    access-list dmz-in permit tcp 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0 eq 2598
    access-list dmz-in deny ip 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0
    pager lines 24
    icmp permit any dmz
    icmp permit any inside
    mtu dmz 1500
    mtu inside 1500
    ip address dmz 192.168.2.254 255.255.255.0
    ip address inside 192.168.1.251 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm history enable
    arp timeout 14400
    nat (dmz) 0 access-list nonat_dmz
    nat (inside) 0 access-list nonat_inside
    access-group dmz-in in interface dmz
    route dmz 0.0.0.0 0.0.0.0 192.168.2.1 1
    route inside 192.168.100.0 255.255.255.0 192.168.1.252 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet 192.168.1.0 255.255.255.0 inside
    telnet 192.168.2.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    terminal width 80
    Cryptochecksum:a02ff663cb34692572d717c6481bbf6e
    : end


    any help would be appreciated.
     
    mykke101, May 16, 2011
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Kirk Goins

    Port forwarding on a PIX 501 at 6.3

    Kirk Goins, Dec 19, 2003, in forum: Cisco
    Replies:
    5
    Views:
    12,662
  2. Andre
    Replies:
    7
    Views:
    813
    Andre
    Feb 20, 2005
  3. cdoc

    Cisco pix 501 vs 501-50

    cdoc, May 19, 2006, in forum: Cisco
    Replies:
    6
    Views:
    700
    Walter Roberson
    May 20, 2006
  4. smokey7244521

    Opening an outboung Port on Pix

    smokey7244521, Nov 22, 2006, in forum: Cisco
    Replies:
    1
    Views:
    774
    ahmad82pkn
    Nov 29, 2006
  5. Kremlar

    opening a port on my PIX-506E

    Kremlar, Dec 6, 2006, in forum: Cisco
    Replies:
    5
    Views:
    1,127
    Chad Mahoney
    Dec 7, 2006
Loading...

Share This Page