OCZ EvoStream 600-watt SLI PSU using Modular Design

Discussion in 'Front Page News' started by Silverstrand, Dec 8, 2006.

  1. Silverstrand

    Silverstrand

    Joined:
    Jun 20, 2005
    Messages:
    1,949
    Location:
    Wisconsin
    "As far as the numbers are concerned, the EvoStream 600 is designed to handle a continuous load of 600 watts. It makes use of four 12v rails, each of which are rated at 15A. While this isn't the beefiest setup on the block, it will be sufficient for all but the most hardcore systems. Our test system runs a pair of hungry video cards and no issues were noted even under load.

    The 5v rail is rated at 30A and the 3.3v rail is rated at 20A, so even older Athlon based systems should be well provided for."

    For more information, please visit - http://www.tweaktown.com/articles/1004/
    Silverstrand, Dec 8, 2006
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. samul888@vip.163.com
    Replies:
    1
    Views:
    804
    Jayesh Sharma
    Nov 13, 2005
  2. Silverstrand
    Replies:
    0
    Views:
    565
    Silverstrand
    Mar 17, 2006
  3. samul888@vip.163.com
    Replies:
    0
    Views:
    816
    samul888@vip.163.com
    Nov 12, 2005
  4. samul888@vip.163.com
    Replies:
    0
    Views:
    713
    samul888@vip.163.com
    Nov 12, 2005
  5. martylyons@gmail.com

    65 watt vs 90 watt power supply dell m70

    martylyons@gmail.com, Feb 21, 2006, in forum: Computer Support
    Replies:
    5
    Views:
    1,456
    Roy Jones
    Feb 25, 2006
Loading...

Share This Page