ntkrnlmp.exe error -- error code 4

Discussion in 'Windows 64bit' started by =?Utf-8?B?R29sZCBFYWdsZQ==?=, Oct 1, 2005.

  1. I just downloaded WinXP x64 trial edition. When I boot off of the CD, after
    setup asks to press F2 for Automated System Recovery, I get the error:

    ntkrnlmp.exe. Error code 4. setup cannot continue.

    any idea why? thanks
    =?Utf-8?B?R29sZCBFYWdsZQ==?=, Oct 1, 2005
    #1
    1. Advertising

  2. What type of media did you burn Windows XP Pro x64 to, Blank CD or CD-RW?
    Try using a Blank CD instead of CD-RW. Also, is your BIOS updated? You may
    also need to load F6 Drivers for any SATA/RAID hard disk you have installed.
    A great place to get drivers is at http://www.planetamd64.com
    --
    Andre
    Extended64 | http://www.extended64.com
    Blog | http://www.extended64.com/blogs/andre
    http://spaces.msn.com/members/adacosta
    FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

    "Gold Eagle" <> wrote in message
    news:...
    >I just downloaded WinXP x64 trial edition. When I boot off of the CD, after
    > setup asks to press F2 for Automated System Recovery, I get the error:
    >
    > ntkrnlmp.exe. Error code 4. setup cannot continue.
    >
    > any idea why? thanks
    Andre Da Costa [Extended64], Oct 1, 2005
    #2
    1. Advertising

  3. Hello GoldEagle,
    This can be bad Ram.
    This could be a bad burn to the CD.
    There could be a problem with the Cd-Rom Drive.
    Almost always with this error it is a problem with the hardware or with
    reading the data from the cd-drive.
    Thanks,
    Darrell Gorter[MSFT]

    This posting is provided "AS IS" with no warranties, and confers no rights
    --------------------
    <Thread-Topic: ntkrnlmp.exe error -- error code 4
    <thread-index: AcXGzKDRHphq/F4iQritadvjTu+EQw==
    <X-WBNR-Posting-Host: 202.177.150.62
    <From: "=?Utf-8?B?R29sZCBFYWdsZQ==?=" <>
    <Subject: ntkrnlmp.exe error -- error code 4
    <Date: Sat, 1 Oct 2005 14:11:02 -0700
    <Lines: 6
    <Message-ID: <>
    <MIME-Version: 1.0
    <Content-Type: text/plain;
    < charset="Utf-8"
    <Content-Transfer-Encoding: 7bit
    <X-Newsreader: Microsoft CDO for Windows 2000
    <Content-Class: urn:content-classes:message
    <Importance: normal
    <Priority: normal
    <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
    <Newsgroups: microsoft.public.windows.64bit.general
    <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
    <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
    <Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.64bit.general:18534
    <X-Tomcat-NG: microsoft.public.windows.64bit.general
    <
    <I just downloaded WinXP x64 trial edition. When I boot off of the CD,
    after
    <setup asks to press F2 for Automated System Recovery, I get the error:
    <
    <ntkrnlmp.exe. Error code 4. setup cannot continue.
    <
    <any idea why? thanks
    <
    Darrell Gorter[MSFT], Oct 1, 2005
    #3
  4. The ram module is fine. I'm pretty sure about that. I'll try re writing the
    CD. The ROM is fine too. All other disks work just fine. Could there be any
    other problem? Thanks.

    ""Darrell Gorter[MSFT]"" wrote:

    > Hello GoldEagle,
    > This can be bad Ram.
    > This could be a bad burn to the CD.
    > There could be a problem with the Cd-Rom Drive.
    > Almost always with this error it is a problem with the hardware or with
    > reading the data from the cd-drive.
    > Thanks,
    > Darrell Gorter[MSFT]
    >
    > This posting is provided "AS IS" with no warranties, and confers no rights
    > --------------------
    > <Thread-Topic: ntkrnlmp.exe error -- error code 4
    > <thread-index: AcXGzKDRHphq/F4iQritadvjTu+EQw==
    > <X-WBNR-Posting-Host: 202.177.150.62
    > <From: "=?Utf-8?B?R29sZCBFYWdsZQ==?=" <>
    > <Subject: ntkrnlmp.exe error -- error code 4
    > <Date: Sat, 1 Oct 2005 14:11:02 -0700
    > <Lines: 6
    > <Message-ID: <>
    > <MIME-Version: 1.0
    > <Content-Type: text/plain;
    > < charset="Utf-8"
    > <Content-Transfer-Encoding: 7bit
    > <X-Newsreader: Microsoft CDO for Windows 2000
    > <Content-Class: urn:content-classes:message
    > <Importance: normal
    > <Priority: normal
    > <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
    > <Newsgroups: microsoft.public.windows.64bit.general
    > <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
    > <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
    > <Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.64bit.general:18534
    > <X-Tomcat-NG: microsoft.public.windows.64bit.general
    > <
    > <I just downloaded WinXP x64 trial edition. When I boot off of the CD,
    > after
    > <setup asks to press F2 for Automated System Recovery, I get the error:
    > <
    > <ntkrnlmp.exe. Error code 4. setup cannot continue.
    > <
    > <any idea why? thanks
    > <
    >
    >
    =?Utf-8?B?R29sZCBFYWdsZQ==?=, Oct 2, 2005
    #4
  5. disable any overclocking. And use a RAM checker to be sure.

    RAM can be a subtle problem that doesn't always show up the same in x64 as
    it does in x86. For more on possible testers and solutions, see my blog:
    http://msmvps.com/xperts64/archive/2005/09/01/64999.aspx


    --
    Charlie.
    http://msmvps.com/xperts64

    Gold Eagle wrote:
    > The ram module is fine. I'm pretty sure about that. I'll try re writing
    > the CD. The ROM is fine too. All other disks work just fine. Could there
    > be any other problem? Thanks.
    >
    > ""Darrell Gorter[MSFT]"" wrote:
    >
    >> Hello GoldEagle,
    >> This can be bad Ram.
    >> This could be a bad burn to the CD.
    >> There could be a problem with the Cd-Rom Drive.
    >> Almost always with this error it is a problem with the hardware or with
    >> reading the data from the cd-drive.
    >> Thanks,
    >> Darrell Gorter[MSFT]
    >>
    >> This posting is provided "AS IS" with no warranties, and confers no
    >> rights --------------------
    >> <Thread-Topic: ntkrnlmp.exe error -- error code 4
    >> <thread-index: AcXGzKDRHphq/F4iQritadvjTu+EQw==
    >> <X-WBNR-Posting-Host: 202.177.150.62
    >> <From: "=?Utf-8?B?R29sZCBFYWdsZQ==?="
    >> <> <Subject: ntkrnlmp.exe error --
    >> error code 4 <Date: Sat, 1 Oct 2005 14:11:02 -0700
    >> <Lines: 6
    >> <Message-ID: <>
    >> <MIME-Version: 1.0
    >> <Content-Type: text/plain;
    >> < charset="Utf-8"
    >> <Content-Transfer-Encoding: 7bit
    >> <X-Newsreader: Microsoft CDO for Windows 2000
    >> <Content-Class: urn:content-classes:message
    >> <Importance: normal
    >> <Priority: normal
    >> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
    >> <Newsgroups: microsoft.public.windows.64bit.general
    >> <NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
    >> <Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
    >> <Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.64bit.general:18534
    >> <X-Tomcat-NG: microsoft.public.windows.64bit.general
    >> <
    >> <I just downloaded WinXP x64 trial edition. When I boot off of the CD,
    >> after
    >> <setup asks to press F2 for Automated System Recovery, I get the error:
    >> <
    >> <ntkrnlmp.exe. Error code 4. setup cannot continue.
    >> <
    >> <any idea why? thanks
    >> <
    Charlie Russel - MVP, Oct 2, 2005
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. PB
    Replies:
    1
    Views:
    531
  2. Bob Thompson
    Replies:
    9
    Views:
    88,883
    HajraPeti
    Jan 11, 2011
  3. =?Utf-8?B?QXRhbnUgTWFoYXRh?=

    MOC code and Exam code

    =?Utf-8?B?QXRhbnUgTWFoYXRh?=, Dec 28, 2006, in forum: MCSE
    Replies:
    28
    Views:
    926
  4. Replies:
    2
    Views:
    1,813
    Charlie Russel - MVP
    Dec 30, 2005
  5. =?Utf-8?B?Q2FyYXZhbnNlcmFp?=

    explorer.exe Application Error (NOT iexplorer.exe)

    =?Utf-8?B?Q2FyYXZhbnNlcmFp?=, Sep 10, 2007, in forum: Windows 64bit
    Replies:
    1
    Views:
    460
    Steve Foster [SBS MVP]
    Sep 11, 2007
Loading...

Share This Page