Network access issue

Discussion in 'Windows 64bit' started by =?Utf-8?B?RmllbGRUZWNoQnJhZA==?=, Jul 17, 2005.

  1. Hello,

    I have a winME (yeah go ahead and roll your eyes) pc on my network, and I
    previously was sharing a printer through my winXP pro machine. I swapped a
    new HD in the tray and got my hands on a new copy of x64. Besides not being
    about to find any SATA378 (EIDE) mode drivers, everything seemed to work ok
    EXCEPT that the win ME machine can no longer access my shares. I have
    disabled simple file sharing, and shared my hp printer as normal. When I
    attempt to access my pc from the ME machine it gives me the old
    \\server_name\IPC$ and asks for a password. We are NOT in a domain, and they
    have the same workgroup settings. The IPs are on the same subnet. The ME
    machine is logging in properly with the correct name and password setup on
    the x64 box. Coincidentally if i use the administrator pw and username it
    still doesn't allow me access to even view the shares, and if you use net
    view you get an error 51. Anyone have any info on this problem?

    1. Network share problems with Win ME or 9x.
    2. Eide drivers for SATA378. I know they have raid mode drivers but i
    cannot find EIDE drivers. Promise technology.
    =?Utf-8?B?RmllbGRUZWNoQnJhZA==?=, Jul 17, 2005
    #1
    1. Advertising

  2. Network -- check that you don't have the firewall enabled. In a fresh
    install, it will be enabled by default. If it is, you need to enable File and
    Print Sharing for it. If you have an NVidia motherboard, make sure that the
    built in NVidia firewall has been installed and then uninstalled it you want
    to ensure that it is really not there. By default, it appears to have pieces
    of itself installed even when you explicitly have not installed it.

    Promise -- they seem to be having a problem getting their drivers out. If
    your mobo includes an alternative, like a VIA RAID controller, try that --
    their drivers are working just fine.


    --
    Please, all replies to the newsgroup.
    ======================
    Charlie.
    http://www.msmvps.com/xperts64/


    FieldTechBrad wrote:
    > Hello,
    >
    > I have a winME (yeah go ahead and roll your eyes) pc on my network,
    > and I previously was sharing a printer through my winXP pro machine.
    > I swapped a new HD in the tray and got my hands on a new copy of x64.
    > Besides not being about to find any SATA378 (EIDE) mode drivers,
    > everything seemed to work ok EXCEPT that the win ME machine can no
    > longer access my shares. I have disabled simple file sharing, and
    > shared my hp printer as normal. When I attempt to access my pc from
    > the ME machine it gives me the old \\server_name\IPC$ and asks for a
    > password. We are NOT in a domain, and they have the same workgroup
    > settings. The IPs are on the same subnet. The ME machine is logging
    > in properly with the correct name and password setup on the x64 box.
    > Coincidentally if i use the administrator pw and username it still
    > doesn't allow me access to even view the shares, and if you use net
    > view you get an error 51. Anyone have any info on this problem?
    >
    > 1. Network share problems with Win ME or 9x.
    > 2. Eide drivers for SATA378. I know they have raid mode drivers but i
    > cannot find EIDE drivers. Promise technology.
    Charlie Russel - MVP, Jul 17, 2005
    #2
    1. Advertising

  3. =?Utf-8?B?RmllbGRUZWNoQnJhZA==?=

    Ted Guest

    Try share the whole hard drive, see what happens.

    "Charlie Russel - MVP" <> wrote in message
    news:...
    > Network -- check that you don't have the firewall enabled. In a fresh
    > install, it will be enabled by default. If it is, you need to enable File
    > and Print Sharing for it. If you have an NVidia motherboard, make sure
    > that the built in NVidia firewall has been installed and then uninstalled
    > it you want to ensure that it is really not there. By default, it appears
    > to have pieces of itself installed even when you explicitly have not
    > installed it.
    >
    > Promise -- they seem to be having a problem getting their drivers out. If
    > your mobo includes an alternative, like a VIA RAID controller, try that --
    > their drivers are working just fine.
    >
    >
    > --
    > Please, all replies to the newsgroup.
    > ======================
    > Charlie.
    > http://www.msmvps.com/xperts64/
    >
    >
    > FieldTechBrad wrote:
    >> Hello,
    >>
    >> I have a winME (yeah go ahead and roll your eyes) pc on my network,
    >> and I previously was sharing a printer through my winXP pro machine.
    >> I swapped a new HD in the tray and got my hands on a new copy of x64.
    >> Besides not being about to find any SATA378 (EIDE) mode drivers,
    >> everything seemed to work ok EXCEPT that the win ME machine can no
    >> longer access my shares. I have disabled simple file sharing, and
    >> shared my hp printer as normal. When I attempt to access my pc from
    >> the ME machine it gives me the old \\server_name\IPC$ and asks for a
    >> password. We are NOT in a domain, and they have the same workgroup
    >> settings. The IPs are on the same subnet. The ME machine is logging
    >> in properly with the correct name and password setup on the x64 box.
    >> Coincidentally if i use the administrator pw and username it still
    >> doesn't allow me access to even view the shares, and if you use net
    >> view you get an error 51. Anyone have any info on this problem?
    >>
    >> 1. Network share problems with Win ME or 9x.
    >> 2. Eide drivers for SATA378. I know they have raid mode drivers but i
    >> cannot find EIDE drivers. Promise technology.

    >
    >
    Ted, Jul 18, 2005
    #3
  4. how is that going to help him or anyone else?

    --
    Please, all replies to the newsgroup.
    ======================
    Charlie.
    http://www.msmvps.com/xperts64/


    Ted wrote:
    > Try share the whole hard drive, see what happens.
    >
    > "Charlie Russel - MVP" <> wrote in
    > message news:...
    >> Network -- check that you don't have the firewall enabled. In a fresh
    >> install, it will be enabled by default. If it is, you need to enable
    >> File and Print Sharing for it. If you have an NVidia motherboard,
    >> make sure that the built in NVidia firewall has been installed and
    >> then uninstalled it you want to ensure that it is really not there.
    >> By default, it appears to have pieces of itself installed even when
    >> you explicitly have not installed it.
    >>
    >> Promise -- they seem to be having a problem getting their drivers
    >> out. If your mobo includes an alternative, like a VIA RAID
    >> controller, try that -- their drivers are working just fine.
    >>
    >>
    >> --
    >> Please, all replies to the newsgroup.
    >> ======================
    >> Charlie.
    >> http://www.msmvps.com/xperts64/
    >>
    >>
    >> FieldTechBrad wrote:
    >>> Hello,
    >>>
    >>> I have a winME (yeah go ahead and roll your eyes) pc on my network,
    >>> and I previously was sharing a printer through my winXP pro machine.
    >>> I swapped a new HD in the tray and got my hands on a new copy of
    >>> x64. Besides not being about to find any SATA378 (EIDE) mode
    >>> drivers, everything seemed to work ok EXCEPT that the win ME
    >>> machine can no longer access my shares. I have disabled simple
    >>> file sharing, and shared my hp printer as normal. When I attempt
    >>> to access my pc from the ME machine it gives me the old
    >>> \\server_name\IPC$ and asks for a password. We are NOT in a
    >>> domain, and they have the same workgroup settings. The IPs are on
    >>> the same subnet. The ME machine is logging in properly with the
    >>> correct name and password setup on the x64 box. Coincidentally if i
    >>> use the administrator pw and username it still doesn't allow me
    >>> access to even view the shares, and if you use net view you get an
    >>> error 51. Anyone have any info on this problem? 1. Network share
    >>> problems with Win ME or 9x.
    >>> 2. Eide drivers for SATA378. I know they have raid mode drivers
    >>> but i cannot find EIDE drivers. Promise technology.
    Charlie Russel - MVP, Jul 18, 2005
    #4
  5. I have turned off the windows firewall and i still have the same issue. Ted,
    i did not share the whole drive yet but i cannot view any of the shares not
    even a shared printer, i get an access denied message error 51 with net view
    or it just gives me servername\ipc$ instead through explorer. I will try
    shortly but i am almost positive that will not help. Charlie, what is the
    nvidia firewall? I got the latest drivers from the nvidia website unified
    driver package, and i do not recall an nvidia firewall setting. Help?
    Thanks.

    Brad

    "Ted" wrote:

    > Try share the whole hard drive, see what happens.
    >
    > "Charlie Russel - MVP" <> wrote in message
    > news:...
    > > Network -- check that you don't have the firewall enabled. In a fresh
    > > install, it will be enabled by default. If it is, you need to enable File
    > > and Print Sharing for it. If you have an NVidia motherboard, make sure
    > > that the built in NVidia firewall has been installed and then uninstalled
    > > it you want to ensure that it is really not there. By default, it appears
    > > to have pieces of itself installed even when you explicitly have not
    > > installed it.
    > >
    > > Promise -- they seem to be having a problem getting their drivers out. If
    > > your mobo includes an alternative, like a VIA RAID controller, try that --
    > > their drivers are working just fine.
    > >
    > >
    > > --
    > > Please, all replies to the newsgroup.
    > > ======================
    > > Charlie.
    > > http://www.msmvps.com/xperts64/
    > >
    > >
    > > FieldTechBrad wrote:
    > >> Hello,
    > >>
    > >> I have a winME (yeah go ahead and roll your eyes) pc on my network,
    > >> and I previously was sharing a printer through my winXP pro machine.
    > >> I swapped a new HD in the tray and got my hands on a new copy of x64.
    > >> Besides not being about to find any SATA378 (EIDE) mode drivers,
    > >> everything seemed to work ok EXCEPT that the win ME machine can no
    > >> longer access my shares. I have disabled simple file sharing, and
    > >> shared my hp printer as normal. When I attempt to access my pc from
    > >> the ME machine it gives me the old \\server_name\IPC$ and asks for a
    > >> password. We are NOT in a domain, and they have the same workgroup
    > >> settings. The IPs are on the same subnet. The ME machine is logging
    > >> in properly with the correct name and password setup on the x64 box.
    > >> Coincidentally if i use the administrator pw and username it still
    > >> doesn't allow me access to even view the shares, and if you use net
    > >> view you get an error 51. Anyone have any info on this problem?
    > >>
    > >> 1. Network share problems with Win ME or 9x.
    > >> 2. Eide drivers for SATA378. I know they have raid mode drivers but i
    > >> cannot find EIDE drivers. Promise technology.

    > >
    > >

    >
    >
    >
    =?Utf-8?B?RmllbGRUZWNoQnJhZA==?=, Jul 18, 2005
    #5
  6. Nvidia has some sort of semi-hardware level firewall built into their
    chipset. Or that's the way I read their marketing gorp. I don't have an
    Nvidia mobo, so I'm a bit hampered here. But many users have reported that
    when they tried to access some things they had problems, but if they
    installed the software portion of the firewall, and then disabled it and
    uninstalled it, the problems went away.

    --
    Please, all replies to the newsgroup.
    ======================
    Charlie.
    http://www.msmvps.com/xperts64/


    FieldTechBrad wrote:
    > I have turned off the windows firewall and i still have the same
    > issue. Ted, i did not share the whole drive yet but i cannot view
    > any of the shares not even a shared printer, i get an access denied
    > message error 51 with net view or it just gives me servername\ipc$
    > instead through explorer. I will try shortly but i am almost positive
    > that will not help. Charlie, what is the nvidia firewall? I got the
    > latest drivers from the nvidia website unified driver package, and i
    > do not recall an nvidia firewall setting. Help? Thanks.
    >
    > Brad
    >
    > "Ted" wrote:
    >
    >> Try share the whole hard drive, see what happens.
    >>
    >> "Charlie Russel - MVP" <> wrote in
    >> message news:...
    >>> Network -- check that you don't have the firewall enabled. In a
    >>> fresh install, it will be enabled by default. If it is, you need to
    >>> enable File and Print Sharing for it. If you have an NVidia
    >>> motherboard, make sure that the built in NVidia firewall has been
    >>> installed and then uninstalled it you want to ensure that it is
    >>> really not there. By default, it appears to have pieces of itself
    >>> installed even when you explicitly have not installed it.
    >>>
    >>> Promise -- they seem to be having a problem getting their drivers
    >>> out. If your mobo includes an alternative, like a VIA RAID
    >>> controller, try that -- their drivers are working just fine.
    >>>
    >>>
    >>> --
    >>> Please, all replies to the newsgroup.
    >>> ======================
    >>> Charlie.
    >>> http://www.msmvps.com/xperts64/
    >>>
    >>>
    >>> FieldTechBrad wrote:
    >>>> Hello,
    >>>>
    >>>> I have a winME (yeah go ahead and roll your eyes) pc on my network,
    >>>> and I previously was sharing a printer through my winXP pro
    >>>> machine. I swapped a new HD in the tray and got my hands on a new
    >>>> copy of x64. Besides not being about to find any SATA378 (EIDE)
    >>>> mode drivers, everything seemed to work ok EXCEPT that the win ME
    >>>> machine can no longer access my shares. I have disabled simple
    >>>> file sharing, and shared my hp printer as normal. When I attempt
    >>>> to access my pc from the ME machine it gives me the old
    >>>> \\server_name\IPC$ and asks for a password. We are NOT in a
    >>>> domain, and they have the same workgroup settings. The IPs are on
    >>>> the same subnet. The ME machine is logging in properly with the
    >>>> correct name and password setup on the x64 box. Coincidentally if
    >>>> i use the administrator pw and username it still doesn't allow me
    >>>> access to even view the shares, and if you use net view you get an
    >>>> error 51. Anyone have any info on this problem?
    >>>>
    >>>> 1. Network share problems with Win ME or 9x.
    >>>> 2. Eide drivers for SATA378. I know they have raid mode drivers
    >>>> but i cannot find EIDE drivers. Promise technology.
    Charlie Russel - MVP, Jul 19, 2005
    #6
  7. =?Utf-8?B?RmllbGRUZWNoQnJhZA==?=

    Ted Guest

    > how is that going to help him or anyone else?

    I ran into many XP computers that can't see a share unless
    you share the whole hard drive.
    I don't know why it does that.
    Win 98 and W2K never had this problem.
    In my XP computers shares work OK.


    "Charlie Russel - MVP" <> wrote in message
    news:...
    > how is that going to help him or anyone else?
    >
    > --
    > Please, all replies to the newsgroup.
    > ======================
    > Charlie.
    > http://www.msmvps.com/xperts64/
    >
    >
    > Ted wrote:
    >> Try share the whole hard drive, see what happens.
    >>
    >> "Charlie Russel - MVP" <> wrote in
    >> message news:...
    >>> Network -- check that you don't have the firewall enabled. In a fresh
    >>> install, it will be enabled by default. If it is, you need to enable
    >>> File and Print Sharing for it. If you have an NVidia motherboard,
    >>> make sure that the built in NVidia firewall has been installed and
    >>> then uninstalled it you want to ensure that it is really not there.
    >>> By default, it appears to have pieces of itself installed even when
    >>> you explicitly have not installed it.
    >>>
    >>> Promise -- they seem to be having a problem getting their drivers
    >>> out. If your mobo includes an alternative, like a VIA RAID
    >>> controller, try that -- their drivers are working just fine.
    >>>
    >>>
    >>> --
    >>> Please, all replies to the newsgroup.
    >>> ======================
    >>> Charlie.
    >>> http://www.msmvps.com/xperts64/
    >>>
    >>>
    >>> FieldTechBrad wrote:
    >>>> Hello,
    >>>>
    >>>> I have a winME (yeah go ahead and roll your eyes) pc on my network,
    >>>> and I previously was sharing a printer through my winXP pro machine.
    >>>> I swapped a new HD in the tray and got my hands on a new copy of
    >>>> x64. Besides not being about to find any SATA378 (EIDE) mode
    >>>> drivers, everything seemed to work ok EXCEPT that the win ME
    >>>> machine can no longer access my shares. I have disabled simple
    >>>> file sharing, and shared my hp printer as normal. When I attempt
    >>>> to access my pc from the ME machine it gives me the old
    >>>> \\server_name\IPC$ and asks for a password. We are NOT in a
    >>>> domain, and they have the same workgroup settings. The IPs are on
    >>>> the same subnet. The ME machine is logging in properly with the
    >>>> correct name and password setup on the x64 box. Coincidentally if i
    >>>> use the administrator pw and username it still doesn't allow me
    >>>> access to even view the shares, and if you use net view you get an
    >>>> error 51. Anyone have any info on this problem? 1. Network share
    >>>> problems with Win ME or 9x.
    >>>> 2. Eide drivers for SATA378. I know they have raid mode drivers
    >>>> but i cannot find EIDE drivers. Promise technology.

    >
    >
    Ted, Jul 19, 2005
    #7
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. yar
    Replies:
    4
    Views:
    1,625
    Juan Carlos \(El fortinero\)
    Sep 21, 2004
  2. Ernie
    Replies:
    0
    Views:
    570
    Ernie
    Jan 18, 2004
  3. frankg

    home network access issue

    frankg, Sep 6, 2005, in forum: Computer Support
    Replies:
    10
    Views:
    788
    frankg
    Sep 7, 2005
  4. Southern Kiwi
    Replies:
    6
    Views:
    2,117
    Southern Kiwi
    Mar 19, 2006
  5. GoldHawk
    Replies:
    2
    Views:
    914
    GoldHawk
    Apr 19, 2008
Loading...

Share This Page