Need To Setup Cisco 7940 for Sipgate

Discussion in 'UK VOIP' started by viconsul@gmail.com, Aug 24, 2005.

  1. Guest

    Hi

    I hope someone can shed some light to what I need to get this working.
    I have a Cisco 7940 phone ( Sip firmware 7.5 ) but when I follow the
    sipgate online configuration example I can get a dial tone and I can
    call the test number and hear the recorded message (german Language),
    but I cannot call other number or receive any call (both sip - sip and
    pstn -sip or sip to pstn).

    Below is my configuration, please note I have a public ip dedicated to
    the phone so I'm not using nat and no firewall restriction.

    dhcp_server : Disabled
    my_ip_addr : 2**.**5.**7.***
    subnet_mask : 255.255.255.248
    defaultgw : 2**.**5.**7.***
    dyn_dns_addr_1 : 0.0.0.0
    dyn_dns_addr_2 : 0.0.0.0
    dns_addr : 2**.*3.*.*
    dns_backup_1: 2**.*3.*.*
    primary_tftp_addr : 2**.**5.**7.**
    dyn_tftp_addr : 0.0.0.0
    my_mac_addr : 000b:46e9:ab60
    domain_name : sipgate.co.uk
    my_name : SIP000B46E9AB60
    Status Flags : 12300001

    image_version : "P0S3-07-5-00"
    FirmLoadID : "PC03C300"
    DSPLoadID : "PS03AT46"
    network_media_type : Full100
    network_port2_type : Hub/Switch
    tos_media : 5
    phone_label : "my sipagate id"
    tftp_cfg_dir : ""
    phone_password : ***********
    phone_prompt : "sip"
    language : english
    sntp_mode : DirectedBroadcast
    sntp_server : 6*.4.9*.2**
    time_zone : GMT
    dst_offset : 1
    dst_start_month : April
    dst_start_day : 0
    dst_start_day_of_week : Sun
    dst_start_week_of_month : 1
    dst_start_time : 02
    dst_stop_month : Oct
    dst_stop_day : 0
    dst_stop_day_of_week : Sunday
    dst_stop_week_of_month : 8
    dst_stop_time : 2
    dst_auto_adjust : 1
    time_format_24hr : 1
    date_format : M/D/Y
    nat_enable : 0
    nat_address : UNPROVISIONED
    voip_control_port : 5060
    start_media_port : 16384
    end_media_port : 32766
    sync : "1"
    xml_card_dir : ""
    xml_card_file : "CARD.XML"
    telnet_level : 2
    services_url : ""
    directory_url : ""
    logo_url : ""
    http_proxy_addr : UNPROVISIONED
    http_proxy_port : 80
    garp_enable : 1
    enable_vad : 0
    dial_template : "dialplan"
    callerid_blocking : 0
    anonymous_call_block : 0
    autocomplete : 1
    messages_uri : ""
    dnd_control : 0
    preferred_codec : g729a
    dtmf_outofband : avt
    dtmf_avt_payload : 101
    dtmf_db_level : 3
    dtmf_inband : 1
    line1_name : "my sipgate username"
    line2_name : ""
    line1_authname : "my sipgate id"
    line2_authname : ""
    line1_password : **********
    line2_password : **********
    line1_shortname : "+44 207 0******"
    line2_shortname : "UNPROVISIONED"
    line1_displayname : "+44 207 0******"
    line2_displayname : ""
    proxy1_address : "sipgate.co.uk"
    proxy2_address : ""
    proxy1_port : 5060
    proxy2_port : 5060
    sip_retx : 10
    sip_invite_retx : 6
    timer_t1 : 500
    timer_t2 : 4000
    timer_invite_expires : 180
    timer_register_expires : 3600
    proxy_register : 1
    proxy_backup : ""
    proxy_emergency : ""
    proxy_backup_port : 5060
    proxy_emergency_port : 5060
    outbound_proxy : UNPROVISIONED
    outbound_proxy_port : 5082
    nat_received_processing : 0
    mwi_status : 0
    call_waiting : 1
    user_info : phone
    cnf_join_enable : 1
    remote_party_id : 0
    semi_attended_transfer : 1
    call_hold_ringback : 0
    stutter_msg_waiting : 0
    cfwd_url : ""
    call_stats : 1
    auto_answer : 0
    local_cfwd_enable : 1
    timer_register_delta : 5
    sip_max_forwards : 70
    rfc_2543_hold : 0
    , Aug 24, 2005
    #1
    1. Advertising

  2. themgt Guest

    line1_displayname : XXXXXXX # your 7 digit sipgate sip id
    line1_name : XXXXXXX # ditto
    themgt, Aug 24, 2005
    #2
    1. Advertising

  3. themgt Guest

    themgt, Aug 24, 2005
    #3
  4. viconsul Guest

    Changing the line1_displayname and line1_name to the 7 digit sipgate id
    solve the problem and now I can move the phone behind a firewall.

    Many thanks to themgt.
    viconsul, Aug 25, 2005
    #4
  5. Vicon Guest

    Changing the line1_displayname and line1_name to sipgate id solve the
    problem and now move the phone behind a firewall.

    Many thanks to themgt.
    Vicon, Aug 25, 2005
    #5
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Sven Mueller

    7940 to 7940 direct call

    Sven Mueller, May 19, 2004, in forum: Cisco
    Replies:
    0
    Views:
    657
    Sven Mueller
    May 19, 2004
  2. Sven Mueller

    7940 to 7940 direct call

    Sven Mueller, May 19, 2004, in forum: Cisco
    Replies:
    0
    Views:
    460
    Sven Mueller
    May 19, 2004
  3. Sven Mueller

    Cisco 7940 to Cisco 7940 direct call

    Sven Mueller, May 20, 2004, in forum: Cisco
    Replies:
    0
    Views:
    729
    Sven Mueller
    May 20, 2004
  4. Sven Mueller

    Cisco 7940 to Cisco 7940 direct call

    Sven Mueller, May 20, 2004, in forum: VOIP
    Replies:
    0
    Views:
    705
    Sven Mueller
    May 20, 2004
  5. Giuen
    Replies:
    0
    Views:
    751
    Giuen
    Sep 12, 2008
Loading...

Share This Page