Need help in configuring WIC-1DSU-T1 ona Cisco 3745 router

Discussion in 'Cisco' started by mail_zeni, Dec 20, 2007.

  1. mail_zeni

    mail_zeni

    Joined:
    Dec 20, 2007
    Messages:
    1
    i am currently working on configuring IPLC links for my Organization.... i have a cisco 3745 router..with two WIC-1DSU-T1 and one VWIC-1MFT-T1/E1...

    Given below is the partial output of show diag command

    Slot 0:
    C3745 Mother board 2FE(TX)-3W Port adapter, 7 ports
    Port adapter is analyzed
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    PCB Serial Number : JAE07470GY1
    Processor type : 69
    Top Assy. Part Number : 800-15934-03
    Board Revision : B0
    Fab Part Number : 28-4672-04
    Deviation Number : 65535-65535
    Manufacturing Test Data : FF FF FF FF FF FF FF FF
    RMA Number : 0-0-0-0
    RMA History : 00
    RMA Test History : 00
    Field Diagnostics Data : FF FF FF FF FF FF FF FF
    Hardware Revision : 2.0
    Fab Version : 04
    Chassis Serial Number : JMX0750L030
    Product (FRU) Number : C3745-2FE
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF C1 8B 4A 41 45 30 37 34 37 30 47 59 31 09
    0x10: 69 40 02 F7 C0 46 03 20 00 3E 3E 03 42 42 30 85
    0x20: 1C 12 40 04 80 FF FF FF FF C4 08 FF FF FF FF FF
    0x30: FF FF FF 81 00 00 00 00 04 00 03 00 C5 08 FF FF
    0x40: FF FF FF FF FF FF 41 02 00 02 04 C2 8B 4A 4D 58
    0x50: 30 37 35 30 4C 30 33 30 FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    WIC Slot 0:
    VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1
    Hardware Revision : 0.0
    Top Assy. Part Number : 800-22628-05
    Board Revision : B0
    Deviation Number : 0
    Fab Version : 04
    PCB Serial Number : FOC10501AWY
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Product (FRU) Number : VWIC2-1MFT-T1/E1
    Version Identifier : V01
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 03 FD 41 00 00 C0 46 03 20 00 58 64 05
    0x10: 42 42 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31
    0x20: 30 35 30 31 41 57 59 03 00 81 00 00 00 00 04 00
    0x30: CB 90 56 57 49 43 32 2D 31 4D 46 54 2D 54 31 2F
    0x40: 45 31 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    WIC Slot 1:
    FT1 BT8360
    Hardware revision 1.3 Board revision C0
    Serial number 18234023 Part number 800-03279-03
    FRU Part Number WIC-1DSU-T1=
    Test history 0x0 RMA number 00-00-00
    Connector type Wan Module
    EEPROM format version 2
    EEPROM contents (hex):
    0x20: 02 11 01 03 01 16 3A A7 50 0C CF 03 00 00 00 00
    0x30: 60 00 00 00 00 02 03 01 FF FF FF FF FF FF FF FF

    Slot 1:
    NM-1FE2W Port adapter, 1 port
    Port adapter is analyzed
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 1.0
    Top Assy. Part Number : 800-04796-01
    Board Revision : E1
    Deviation Number : 0-0
    Fab Version : 04
    PCB Serial Number : JAD04370FXT
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Product (FRU) Number : NM-1FE2W=
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 00 D7 41 01 00 C0 46 03 20 00 12 BC 01
    0x10: 42 45 31 80 00 00 00 00 02 04 C1 8B 4A 41 44 30
    0x20: 34 33 37 30 46 58 54 03 00 81 00 00 00 00 04 00
    0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    WIC Slot 0:
    FT1 BT8360
    Hardware revision 1.3 Board revision C0
    Serial number 22912506 Part number 800-03279-03
    FRU Part Number WIC-1DSU-T1=
    Test history 0x0 RMA number 00-00-00
    Connector type Wan Module
    EEPROM format version 2
    EEPROM contents (hex):
    0x20: 02 11 01 03 01 5D 9D FA 50 0C CF 03 00 00 00 00
    0x30: 60 00 00 00 00 09 09 01 FF FF FF FF FF FF FF FF

    I need help in configuring WIC-1DSU-T1 on my router.....

    IOS Version: 12.4(15)T1.

    I used the command "Card type t1 0 1"....but ended up getting the following error message "command not supported on the card attached to this slot".

    Am i doing something wrong...should be...but any help rendered here would of great value for me.

    Thank you.
    mail_zeni, Dec 20, 2007
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Vincent Aniello
    Replies:
    0
    Views:
    427
    Vincent Aniello
    Dec 15, 2004
  2. dt1649651@yahoo.com

    WIC-1DSU-T1 and WIC-1DSU-T1-V2

    dt1649651@yahoo.com, Apr 12, 2005, in forum: Cisco
    Replies:
    4
    Views:
    1,369
    Vincent C Jones
    Apr 12, 2005
  3. stanguru@yahoo.com

    1720 WIC-1T and WIC-1DSU-T1

    stanguru@yahoo.com, Nov 17, 2006, in forum: Cisco
    Replies:
    4
    Views:
    2,273
    Stanguru
    Nov 21, 2006
  4. joey024@aol.com
    Replies:
    1
    Views:
    427
    joey024@aol.com
    Apr 15, 2008
  5. swpa
    Replies:
    8
    Views:
    1,003
Loading...

Share This Page