NAT not Translating

Discussion in 'Cisco' started by Jebez42, Sep 5, 2008.

  1. Jebez42

    Jebez42

    Joined:
    Sep 4, 2008
    Messages:
    3
    From the diagram below, I would like to dynamic nat 192.168.64.0/22 as 10.21.3.0/24 on routerWAN.

    I configured as shown in configuration below; and router3 traffic (192.168.64.0/22) is still accessing router1 hosts (10.200.0.0/16), but I see no translations occurring on routerWAN (via sh ip nat stat/tran). Please advise.


    routerWAN# show ip nat translations

    routerWAN# show ip nat statistics
    Total active translations: 0 (0 static, 0 dynamic; 0 extended)
    Outside interfaces:
    GigabitEthernet0/0, GigabitEthernet0/1
    Inside interfaces:
    FastEthernet1/3
    Hits: 0 Misses: 0
    CEF Translated packets: 0, CEF Punted packets: 0
    Expired translations: 0
    Dynamic mappings:
    -- Inside Source
    [Id: 1] access-list 3 pool router3 refcount 0
    pool router3: netmask 255.255.255.0
    start 10.21.3.129 end 10.21.3.254
    type generic, total addresses 126, allocated 0 (0%), misses 0
    Queued Packets: 0

    {see attached for configuration and diagram}
     

    Attached Files:

    Last edited: Sep 5, 2008
    Jebez42, Sep 5, 2008
    #1
    1. Advertising

  2. Jebez42

    Jebez42

    Joined:
    Sep 4, 2008
    Messages:
    3
    Problem Solved

    As it turns out, router3 is nat`ing 192.168.64.0/22 to 192.168.3.2/32

    Change on routerWAN:
    no access-list 3 permit 192.168.64.0 0.0.3.255 ! -->was
    access-list 3 permit 192.168.3.2 0.0.0.0 ! <--now

    routerWAN# show ip nat translations
    Pro Inside global Inside local Outside local Outside global
    tcp 10.21.3.129:2775 192.168.3.2:2775 10.200.253.201:80 10.200.253.201:80
    --- 10.21.3.129 192.168.3.2 --- ---
     
    Jebez42, Sep 11, 2008
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Jon
    Replies:
    6
    Views:
    504
    Hansang Bae
    Jun 16, 2004
  2. Yamin
    Replies:
    0
    Views:
    842
    Yamin
    Jun 29, 2004
  3. hugh jass

    translating an email...

    hugh jass, Jul 11, 2003, in forum: Computer Support
    Replies:
    5
    Views:
    645
    Paul Gorodyansky
    Jul 13, 2003
  4. dove

    translating web pages.

    dove, May 29, 2005, in forum: Computer Support
    Replies:
    4
    Views:
    501
    Rudolpho
    May 29, 2005
  5. Jebez42

    NAT not Translating

    Jebez42, Sep 5, 2008, in forum: Cisco
    Replies:
    0
    Views:
    479
    Jebez42
    Sep 5, 2008
Loading...

Share This Page