My CE-507 gives me Linux bash# prompt. Corrupted flash??

Discussion in 'Cisco' started by DerekC, Oct 9, 2004.

  1. DerekC

    DerekC Guest

    My CE-507 gives me Linux bash# prompt. Corrupted flash??
    How can I reload the software, hopefully ACNS 5, and the flash image?
    I found an ACNS CD rescue.ISO image in the download page and I burned
    a bootable CD and hooked up a SCSI CDROM to the CE-507 trying to boot
    from here to "rescue". The SCSI utility sees a bootable CD but it
    outputs no prompt for me to go forward.

    Any expert out there has clue, please?

    Here is the console output with the mid section truncated.
    Thanks for your help in advance.

    ============================================
    Initializing memory. Please wait.
    BIOS Version: CE500 01.11
    BIOS Build date: 07/27/00
    Symbios, Inc. SDMS (TM) V4.0 PCI SCSI BIOS, PCI Rev. 2.0, 2.1
    Copyright 1995, 1998 Symbios, Inc.
    PCI-4.11.00

    HBA ID LUN VENDOR PRODUCT REV SYNC WIDE INT13 CYL/ HD/SEC
    --- -- --- -------- ---------------- ---- ---- ---- ----- ------------
    0 0 0 IBM DDYS-T18350M S96H 80.0 16 BOOT 1024/255/63
    0 7 0 Symbios SYM53C895 0002 80.0 16

    Symbios, Inc. PCI boot ROM successfully installed!
    Cisco CE Booting From Flash.
    running robin2_start.S

    This is cmain! You are now running C code!
    build date: Wed Sep 13 11:15:08 PDT 2000
    build number: 2
    Directory verified ok!
    phase2: examining phase3 boot-rom: 'default_bootrom'
    cmain: going to jump to location PHASE3_MEM_LOCATION = 16777216
    cmain: 10 code bytes:
    85 -119 -27 -125 -20 16 87 86 83 -24

    defphase3.c: Running third-phase bootrom code!
    defphase3.c: directory is ok!
    defphase3.c: db_dir_get_location("rescue") failed: -5
    defphase3.c: your devimg does not seem to have a rescue image in it
    defphase3.c: running default system image instead
    defphase3.c: default system image is 'default_sysimg'
    defphase3.c: default_sysimg: 14 sectors
    defphase3.c: loaded 14 device sectors to 0x2000000!
    defphase3.c: bzimage checksum: 0x2000400, len = 933386
    defphase3.c: initrd checksum: 0x20e4400, len = 844896
    defphase3.c: kernel checksum = 50a8da8f2ab55fe3229110f168965f96
    defphase3.c: initrd checksum = 2a8a4b2bbe7361edf7696f317f4eaa2b
    defphase3.c: calling execute_kernel!
    execute_kernel: system image header:
    .....
    ...
    ... TRUNCATED
    ...
    .....
    3c59x.c:v0.99H 11/17/98 Donald Becker
    http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
    eepro100.c:v1.09j 7/27/99 Donald Becker
    http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
    eth0: Intel PCI EtherExpress Pro100 at 0x98804000, 00:04:4D:E3:62:09,
    IRQ 9.
    Board assembly 668081-002, Physical connectors present: RJ45
    Primary interface chip i82555 PHY #1.
    General self-test: passed.
    Serial sub-system self-test: passed.
    Internal registers self-test: passed.
    ROM checksum self-test: passed (0x04f4518b).
    Receiver lock-up workaround activated.
    eth1: Intel PCI EtherExpress Pro100 at 0x98806000, 00:04:4D:E3:62:0A,
    IRQ 10.
    Board assembly 668081-002, Physical connectors present: RJ45
    Primary interface chip i82555 PHY #1.
    General self-test: passed.
    Serial sub-system self-test: passed.
    Internal registers self-test: passed.
    ROM checksum self-test: passed (0x04f4518b).
    Receiver lock-up workaround activated.
    eepro100.c:v1.09j 7/27/99 Donald Becker
    http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
    Partition check:
    sda:
    Cisco CacheEngine Flash Driver Version 0.01
    wccp: v1.00 (20000327), debug=0
    wccp_list_bypass v1.0.0
    wccp_list_bypass tuple allocated 20480
    DIAMOND-RAMDISK: drd_open called w/ dev 0x0
    EXT2-fs warning: checktime reached, running e2fsck is recommended
    VFS: Mounted root (ext2 filesystem).
    Freeing unused kernel memory: 400k freed
    bash#
     
    DerekC, Oct 9, 2004
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. damon
    Replies:
    7
    Views:
    10,581
    cartersanders
    Aug 29, 2007
  2. steelneck

    Bash script and sessioncookies

    steelneck, Feb 23, 2005, in forum: Firefox
    Replies:
    2
    Views:
    1,063
    steelneck
    Feb 25, 2005
  3. bala
    Replies:
    6
    Views:
    1,283
    Ralph Fox
    Jun 9, 2006
  4. norm
    Replies:
    2
    Views:
    381
  5. troglodyte

    Linux bash

    troglodyte, Sep 21, 2004, in forum: NZ Computing
    Replies:
    32
    Views:
    980
    Harry
    Sep 27, 2004
Loading...

Share This Page