JetDirect Cards and cross over cables

Discussion in 'NZ Computing' started by John Hornblow, Aug 22, 2003.

  1. Hi
    Ive just got an HP laserjet4 with jet direct.
    I picked up a Cat6 cross over cable from dick smith.
    Ive set up IP and subnet mask but no go yet.
    They should work over a cross over cable should they not?

    XP Pro at the other end

    Cheers

    Encore have another 100 Laser 4's in their warehouse...

    shesh, you sould have seen all the monitors they have!
     
    John Hornblow, Aug 22, 2003
    #1
    1. Advertising

  2. John Hornblow

    Gavin Tunney Guest

    On Fri, 22 Aug 2003 19:47:16 +1200, John Hornblow <>
    wrote:

    >On Fri, 22 Aug 2003 06:34:32 GMT, (Gavin Tunney)
    >wrote:
    >
    >>They work fine with a crossover John. Are both NICs lighting up
    >>ok...can ypu ping it ..... bad cable maybe?
    >>

    >The shows not over till the fat ladys rebooted!
    >
    >Has anyone hooked up to a JD card direct with IP in XP?
    >Bit rusty here I must confess...
    >Ive added my IP port...
    >?
    >?


    Easiest way in XP is to download the HP jetdirect installer, lets you
    tell it what IP to look for & then installs the port.

    GT
     
    Gavin Tunney, Aug 22, 2003
    #2
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Captain
    Replies:
    1
    Views:
    474
    M.C. van den Bovenkamp
    May 8, 2004
  2. Ned
    Replies:
    2
    Views:
    3,280
  3. -=rjh=-

    JetDirect printers and W2K

    -=rjh=-, Feb 3, 2004, in forum: NZ Computing
    Replies:
    17
    Views:
    770
    -=rjh=-
    Feb 7, 2004
  4. Dave - Dave.net.nz
    Replies:
    1
    Views:
    347
    Dave - Dave.net.nz
    Sep 30, 2005
  5. Theo Markettos

    VOIP over VPN over TCP over WAP over 3G

    Theo Markettos, Feb 3, 2008, in forum: UK VOIP
    Replies:
    2
    Views:
    976
    Theo Markettos
    Feb 14, 2008
Loading...

Share This Page