Ipsec-Tunnel with ISDN-Backup using Dialer Watch

Discussion in 'Cisco' started by Joerg Woste, Jul 21, 2003.

  1. Joerg  Woste

    Joerg Woste Guest

    Hi there,

    I have some problems to configure an IPSEC-Tunnel with ISDN-Backup using
    dialer-watch. In the first location I have an 1750 with ETH0 to the
    provider-router, ETH1 to the internal network and BRI0 for backup, in the
    other location I have an DMZ with a 3640. ETH0 and BRI0 for Backup. On
    cisco.com I can't find the right configuration-example. That example below
    does not work. I can open the VPN-connection and when the VPN connection is
    down, the BRI-IF comes up, but the crypted traffic does not go over the
    ISDN-line.
    http://www.cisco.com/en/US/customer...s_configuration_example09186a0080094c1f.shtml



    Any Ideas ? Thanks - Jörg
     
    Joerg Woste, Jul 21, 2003
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. a.nonny mouse
    Replies:
    2
    Views:
    1,135
  2. Laurent GARNIER

    NAT befor entering an IPSEC tunnel over ISDN

    Laurent GARNIER, Jan 5, 2007, in forum: Cisco
    Replies:
    2
    Views:
    923
    Laurent GARNIER
    Jan 8, 2007
  3. David Sudjiman
    Replies:
    2
    Views:
    364
    David Sudjiman
    Mar 21, 2007
  4. sync
    Replies:
    0
    Views:
    581
  5. Merv
    Replies:
    0
    Views:
    397
Loading...

Share This Page