intervlans cisco 3550 and cisco 2950

Discussion in 'Cisco' started by Filipe Aleixo, Aug 15, 2007.

  1. Filipe Aleixo

    Filipe Aleixo

    Joined:
    Aug 15, 2007
    Messages:
    1
    Hi,

    I have this problem.

    I'm trying to connect distinct vlans. I have 2 switch cisco 2950 and 1 Multilayer switch 3550, where I connect the 2 2950's, with cross over cables.

    in the first 2950 I have configured VLAN 1 and VLAN 2 and VLAN 3, they're connected to the MLS 3550 with a cross over cable, between gigabiethernet0/1 of the 2950 to fastethernet0/1 of the MLS.

    The other 2950, I have VLAN 2 and VLAN 3 also and it's connected to the MLS from gigabiethernet0/1 to fastethernet0/2.

    The fastethernet ports on the 3550 are configured as switchport mode trunk, but I don't if it's ok, because I can not ping between the vlans. I have to configure layer 3 interfaces but I don't understant how.

    Please help.

    Filipe
    Filipe Aleixo, Aug 15, 2007
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. JohnNews
    Replies:
    10
    Views:
    6,615
    One Step Beyond
    Oct 20, 2003
  2. Steinar Haug
    Replies:
    0
    Views:
    570
    Steinar Haug
    Oct 20, 2003
  3. John Strow

    Cisco 2950 an 3550 switches

    John Strow, Dec 10, 2003, in forum: Cisco
    Replies:
    1
    Views:
    811
    Erik Tamminga
    Dec 13, 2003
  4. Little
    Replies:
    3
    Views:
    13,180
    Bill F
    Jun 22, 2004
  5. Tacobell
    Replies:
    5
    Views:
    4,225
Loading...

Share This Page